Zur „Rückdiffusion“ bei Quecksilberextrusionselektroden

An investigation has been carried out on the influence of the velocity of voltage change, of the radius of the capillary and of the size of the electrodes on the decrease of the peak current caused by back-diffusion in anodic amalgam voltammetry.     

The photodissociation of water by doped iron oxides: The unblased p/n assembly

Mott-Schottky capacitance measurements are used to locate semiconductor band edges for a short-circuited p-type/n-type α-Fe₂O₃ assembly in aqueous solution. The thermodynamic feasibility of the catalytic photodiscussion of water without external bias is verified for this assembly from an energy level diagram obtained for the electrode/electrolyte interfaces. Photocurrent stability and Auger analysis of the electrode show no evidence of electrode dissolution. Oxygen evolution is monitored from an assembly using mass spectrometry and H₂¹⁸O enriched water.     

A natural 15N approach to determine the biological fixation of atmospheric nitrogen by biological soil crusts of the Negev Desert

Biological soil crusts are important cryptogamic communities covering the sand dunes of the north-western Negev. The biological crusts contain cyanobacteria and other free-living N(2)-fixing bacteria and are hence able to fix atmospheric nitrogen (N). This is why they are considered to be one of the main N input pathways into the desert ecosystem. However, up to now, in situ determinations of the N(2) fixation in the field are not known to have been carried out. We examined the natural (15)N method to determine the biological N(2) fixation by these soil crusts under field conditions. This novel natural (15)N method uses the lichen Squamarina with symbiotic green algae--which are unable to fix N(2)--as a reference in order to determine N(2) fixation. Depending on the sampling location and year, the relative biological fixation of atmospheric nitrogen was estimated at 84-91% of the total N content of the biological soil crust. The cyanobacteria-containing soil lichen Collema had a fixation rate of about 88%. These fixation rates were used to derive an absolute atmospheric N input of 10-41 kg N ha(-1) year(-1). These values are reasonable results for the fixation of atmospheric N(2) by the biological crusts and cyanolichens and are in agreement with other comparable lab investigations. As far as we are aware, the results presented are the first to have been obtained from in situ field measurements, albeit only one location of the Negev with a small number of samples was investigated.     

On the solid state structure of 4-iodobenzoic acid

The solid-state structure of 4-iodobenzoic acid has been confirmed by variable temperature X-ray diffraction, variable temperature solid-state NMR and differential scanning calorimetry. 4-iodobenzoic acid crystallizes in the space group P2(1)/n, and dimerizes in the solid state about a center of inversion. Using extensive X-ray crystallographic data collections, the placement of the carboxylate H atoms from the residual electron density in difference Fourier maps was determined. The position of the electron density associated with the proton is found to vary with temperature in that the population of the disordered sites changes with varying temperature. Determination of the crystal structure between the temperatures of 248 and 198 K was not possible due to a phase transition, an endothermic event occurring at 230.77 K. The phase transition is also indicated by a change in the relaxation time of the ring carbon atoms in the solid-state NMR data. Though the dominating force in the dimeric unit in the solid state is the presence of strong hydrogen bonds, there are also van der Waals forces present between the iodine atoms. In the layered structure, the iodine-iodine distance is within the van der Waals contact radii, an interaction which causes a deformation in the electron density of the iodine atoms.     

A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications

Abstract

The outstanding performance of conventional thermosets arising from their covalently cross-linked networks directly results in a limited recyclability. The available commercial or close-to-commercial techniques facing this challenge can be divided into mechanical, thermal, and chemical processing. However, these methods typically require a high energy input and do not take the recycling of the thermoset matrix itself into account. Rather, they focus on retrieving the more valuable fibers, fillers, or substrates. To increase the circularity of thermoset products, many academic studies report potential solutions which require a reduced energy input by using degradable linkages or dynamic covalent bonds. However, the majority of these studies have limited potential for industrial implementation. This review aims to bridge the gap between the industrial and academic developments by focusing on those which are most relevant from a technological, sustainable and economic point of view. An overview is given of currently used approaches for the recycling of thermoset materials, the development of novel inherently recyclable thermosets and examples of possible applications that could reach the market in the near future.     

Relative reactivities in vinyl copolymerization

From data in the literature on relative rates of copolymerization it has been possible to evaluate two constants, Q and e, characteristic of an individual monomer, which appear to account satisfactorily for its behavior in copolymerization. The constant Q describes the “general monomer reactivity” and is apparently related to possibilities for stabilization in a radical adduct. The constant e takes account of polar factors influencing copolymerization.     

An algorithm for semi-empirical design of nucleation rate surface

During the last half of century, Classical Nucleation Theory (CNT) has been developed and there have been advances in the molecular theory of nucleation. Most of these efforts have been directed towards small molecule system modeling using intermolecular potentials. Summarizing the nucleation theory, it can be concluded that the current theory is far from complete. Agreement is generally not obtained between experimental and theoretical results. In practical applications, parametric theories can be used for the systems of interest. However, experimental measurements are still the best source of information on nucleation. Experiments are labor intensive and costly, and thus, it is useful to extend the value of limited experimental measurements to a broader range of nucleation conditions. The available nucleation parameters represent only small regions of possible nucleation conditions over the range from the critical temperature to absolute zero. Thus, it is useful to develop better tools to use the data to estimate semi-empirical nucleation rate surfaces. Following our published approach, the nucleation rate surface for any system can be constructed over its phase diagram. This concept involves using the phase equilibrium diagram to establish lines of zero nucleation rates. Nucleation rate surfaces arise from equilibrium lines and their extensions that are representing unstable equilibria. Only limited experimental data is available for use in normalizing the slopes of the linearized nucleation rate surfaces. The nucleation rate surface is described in terms of steady-state nucleation rates. To design the surfaces of nucleation rates, several assumptions are presented. In the present study, an algorithm for the semi-empirical design of nucleation rate surfaces is introduced. The topology of the nucleation rate surface for a unary system using the example of water vapor nucleation is created semi-empirically. The nucleation of two concurrent (stable and unstable) phase states of critical embryos is considered in the context of multi-surface nucleation rates. Only one phase transition (melting) in the condensed state of water is considered for simplicity. The nucleation rate surface is constructed numerically using the available experimental results for vapor nucleation and phase diagram for water. The nucleation rate for water vapor is developed for the full temperature interval, i.e. from critical point to absolute zero. The results help to suggest a new direction for experimental nucleation research.     

Dialkyldithiocarbamate als Reagentien zur gas-chromatographischen Bestimmung von Metallen

Zusammenfassung Kleine Mengen Ni, Cu und Zn in wäßrigen Lösungen können nach Ausschütteln ihrer Dipropyldithiocarbamatochelate gas-chromatographisch bestimmt werden. Arbeitsbedingungen für den 0,01–1 ppm-Bereich werden angegeben. Die Reproduzierbarkeit der Bestimmung wird durch Zusatz eines inneren Standards verbessert.

---

Dialkyldithiocarbamates as reagents for the gas-chromatographic determination of metalsII. Determination of zinc, copper and nickel as dipropyldithiocarbamato chelates after extraction from aqueous solution

Summary Small amounts of Ni, Cu and Zn in aqueous solutions can be determined by gas chromatography after extraction of their dipropyldithiocarbamatochelates. Working details for the 0.01–1 ppm range are reported. Reproducibility is markedly improved by addition of an inner standard.

Die Untersuchungen wurden in dankenswerter Weise durch Mittel der Deutschen Forschungsgemeinschaft und des Verbands der chemischen Industrie unterstützt.     

Transannular reactions of two parallel 1,3-butadiynes: syntheses,structures, and reactions of 1-azacyclotetradeca-3,5,10,12-tetrayne derivatives

The synthesis of 1-alkyl and 1-aryl-1-azacyclotetradeca-3,5,10,12-tetraynes was achieved in a stepwise approach. The key intermediate was 1,13-dibromotrideca-2,4,9,11-tetrayne (18). Reaction with methyl- (19 a), ethyl- (19 b), isopropyl- (19 c), n-butyl- (19 d), and tert-butylamine (19 e) as well as aniline (19 f) and p-methoxyaniline (19 g) gave the corresponding 14-membered tetraynes 20 a-20 g. The ring inversion process of 20 b was studied by variable temperature (1)H NMR spectroscopy. From these measurements a value of 10.6 kcal mol(-1) was calculated for DeltaG(not equal). X-ray investigations on single crystals of 20 b, 20 c, and 20 f revealed the axial position for the substituent at each nitrogen atom. For 20 b we encountered the chair conformation, for 20 c both chair and boat conformations, and for 20 f the boat conformation in the solid state. The reaction of 20 c with concentrated HCl in ethanol yielded 2,10-dichloro-6-isopropyl-6-azatricyclo[9.3.0.0(4,8)]tetradeca-1(11),2,4(8),9-tetraene (25 c). Compound 25 c was oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to 27 c. The structure of the latter was confirmed by X-ray investigations. The reaction of 20 c in aqueous HCl lead to the formation of 10-chloro-2-isopropyl-1,3,4,6,7,8-hexahydro-2H-benzo[g]isoquinolin-9-one (37 c). The structure of 37 c was verified by X-ray studies on single crystals.     

Cooperative hydrogen-bonding effects in a water square: a single-crystal neutron and partial atomic charges and hardness analysis study

Four isomorphous complexes of formula [M(L)(4)(H(2)O)(2)]SO(4).2H(2)O (M = Co, 1a; Ni, 1b; Cu, 1c; Zn, 1d) have been isolated and characterized by single-crystal X-ray diffraction and neutron diffraction using the quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin as well as by thermogravimetric analysis. The structures contain a discrete, strongly hydrogen-bonded water tetramer which causes a significant distortion of the metal coordination sphere in each case. Partial atomic charges and hardness analysis (PACHA) calculations reveal that the shortest hydrogen bonds are not the strongest in this constrained, cyclic solid-state structure and show that the distortion at the metal center is caused by the drive to maintain the integrity of the water tetramer. The system undergoes a disorder-order transition on slow cooling that provides insight into the nature of communication between water squares.