A fluorimetric assay for cortisol

A simple, rapid and sensitive fluorimetric assay for the quantitative determination of cortisol is reported. The assay is based on the formation of a fluorescent dye when cortisol is incubated with a mixture of sulfuric acid and acetic acid. The fluorescence spectrum recorded for the resulting dye shows a maximum extinction at 475 nm and a maximum emission at 525 nm. The solvent 2-methyl-4-pentanone was used for extraction and was found to act as a fluorescence amplifier. A limit of detection of 2.7 μM was achieved, making it possible to forego solvent evaporation. The assay suffers minor interference from 11-deoxycortisol which exhibits low fluorescence at λ _ex: 460 nm; λ _em: 505 nm. Typical standard deviations were below 4%. We validated the assay using a biotransformation with recombinant Schizosaccharomyces pombe which regioselectively hydroxylates 11-deoxycortisol to cortisol. The method described herein is suitable for preliminary screening of microorganisms capable of steroid hydroxylation.     

Multivariate design

In multivariate data analysis such as principal components analysis (PCA) and projections to latent structures (PLS), it is essential that the training set systems (objects) are selected to provide data with substantial information for model parametrization, and to represent properly any future situations where the multilvariate model is used for predictions. In the framework of multivariate projections (PCA, SIMCA and PLS), elementary concepts of statistical design (fractional factorials and composite designs) can be used with the latent variables (PC or PLS scores) as design variables. The plan of action thus becomes: (1) problem formulation (specify aim and model, make a conceptual division of the investigated system into subsystems); (2) collection of multivariate data for each type of subsystems; (3) estimation of the practical dimensionality of the data for each type of subsystems by PC or PLS analysis; (4) use of the PC or PLS scores (t) as design variables in the combination of subsystems to systems in the training set; (5) measurement of responses (Y); (6) analysis of data by PCA or PLS; (7) interpretation of results with possible feedback to steps 1, 2 or 3. The procedures are illustrated by two problems: a structure/activity relationship for a family of peptides, and optimization of an organic synthesis with respect to system variables (solvent, substrate, co-reactant_) and process variables (temperature, reactant concentrations).     

Acid-base reactions of 1,3,4-thiadiazolines and thiocarbonyl ylides; 1,3,4-thiadiazoline-2-spiro-2′-adamantane

The surprising formation of C₂₂H₃₂N₂S₂ from the title compound 1 at 45°C involves the interaction of the basic adamantanethione S-methylide ($\text{2}$) with its acidic precursor $\text{1}$, in the course of which the anion $\text{6}$ undergoes electrocyclic ring opening; the acid and base functions offer the clue to a prolific chemistry of the thiadiazoline $\text{1}$ and the thiocarbonyl ylide $\text{2}$.     

Are any non-stereospecific 1,3-dipolar cycloadditions known? A revision

The cycloaddition of 1-benzylidenepyrazolid-3-one betaine to (E)-β-nitrostyrene, which has been claimed to furnish 15–30% non-stereospecific product, revealed stereospecificity up to 99.92% in a renewed study; (Z)-β-nitrostyrene stereoisomerizes under the influence of the 1,3-dipole.     

Über die Strukturaufklärung von (Hydroxy-oxo-cyclopentenyl)alkansäuren,den Aldolkondensationsprodukten von Dioxoencarbonsäuren aus Rinderleber

Structure Elucidation of (Hydroxy-oxo-cyclopentenyl)alkanoic Acids, the Aldol-Condensation Products of Dioxoene Acids from Cattle Liver During homogenization of cattle liver the highly instable dioxoene acids 13a , 13b , and 13c are formed. These acids cyclize in alkaline solution to yield pairs of stable (hydroxy-oxo-cyclopentenyl)alkanoic acids, which were isolated as methyl esters 4a / 5a , 4b / 5b , and 4c / 5c . The structures of these compounds were deduced from an enriched 3-mg mixture sample by microchemical reactions combined with a GC/MS analysis of the reaction products. Compound 13a was obtained as methyl ester by oxidation of the methyl ester of the corresponding F-acid with NaOCl. It was not possible to isolate 13a in pure form due to its high sensitivity. Instead of the methyl ester of 13a , 4a and 5a were isolated, of which the structures were established.     

Order-Unity 13C Nuclear Polarization of [1-13C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of ¹³C₁ spins of [1-¹³C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H₂O. Order-unity ¹³C (>50 %) polarization of catalyst-bound [1-¹³C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-¹³C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD₃OD. Efficient ¹³C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T₁ spin-relaxation rates (e. g., ∼0.2 s⁻¹ versus ∼0.1 s⁻¹, respectively, for a 6 mM catalyst-[1-¹³C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-¹³C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-¹³C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.     

General Method to Increase Carboxylic Acid Content on Nanodiamonds

Carboxylic acid is a commonly utilized functional group for covalent surface conjugation of carbon nanoparticles that is typically generated by acid oxidation. However, acid oxidation generates additional oxygen containing groups, including epoxides, ketones, aldehydes, lactones, and alcohols. We present a method to specifically enrich the carboxylic acid content on fluorescent nanodiamond (FND) surfaces. Lithium aluminum hydride is used to reduce oxygen containing surface groups to alcohols. The alcohols are then converted to carboxylic acids through a rhodium (II) acetate catalyzed carbene insertion reaction with tert–butyl diazoacetate and subsequent ester cleavage with trifluoroacetic acid. This carboxylic acid enrichment process significantly enhanced nanodiamond homogeneity and improved the efficiency of functionalizing the FND surface. Biotin functionalized fluorescent nanodiamonds were demonstrated to be robust and stable single-molecule fluorescence and optical trapping probes.     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

Rapid determination of microorganisms using a flow-injection system

An automated method for the rapid determination of microorganisms using a flow-injection system is presented. Electrochemical measurement of a mediator reduced by microbial metabolism allowed the determination of fungi and bacteria in a few minutes. The lowest detection limit was 5 × 10⁶ colony-forming units (cfu) ml^?1 for Escherichia coli. Correlation between the flow-injection method and standard microbiological methods was excellent (r = 0.997, n = 4 for Beauveria bassiana; r = 0.997, n = 7 for E. coli). The flow-injection system was applied to the on-line control of an E. coli cultivation.     

Asymmetric synthesis of (R)-reticuline. A new strategy for the asymmetric synthesis of isoquinolines via enantioselective epoxidation or dihydroxylation

A new strategy for the asymmetric synthesis of 1-benzyl-1,2,3,4-tetrahydroisoquinolines7 − 9 has been developed. The route involves introduction of asymmetry via enantioselective epoxidation or dihydroxylafion of corresponding stilbene precursors followed by aminolysis and Pomeranz-Fritsch cyclization. The strategy has been successfully applied to the asymmetric synthesis of (R)-reticuline (9), the key-intermediate in the synthesis of morphine alkaloids on the biomimetic route.