Highly fluorous complexes of nickel, palladium and platinum: solubility and catalysis in high pressure CO2

A variety of Group 10 metal complexes [MXY(dfppp)], M = Ni, X, Y = Cl, Br, M = Pd, Pt, X, Y = Cl or CH(3), containing the recently reported highly fluorous diphosphine ligand, dfppp, 1,3-bis[di(fluoroponytail)phosphino]propane, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(3) have been synthesised. They have been characterised by NMR, mass spectrometry and microanalysis, with two platinum complexes, [PtCl(2)(dfppp)] and [PtClMe(dfppp)], structurally characterised by single crystal X-ray diffraction studies. The highly fluorous nature of the ligands affords the complexes good supercritical CO(2) solubility as measured by supercritical fluid extraction (SFE), and has allowed for the copolymerisation of CO and ethylene using [PdClMe(dfppp)] as the catalyst precursor and CO(2) as the solvent. Additionally, PtCl(2) complexes of the new ligands dfppb, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(4), and dfpop, {(p-F(13)C(6)C(6)H(4)O)(2)P}(2)(CH(2))(3), have also been prepared and characterised.     

In vivo solid-phase microextraction for single rodent pharmacokinetics studies of carbamazepine and carbamazepine-10,11-epoxide in mice

The use of solid-phase microextraction (SPME) for in vivo sampling of drugs and metabolites in the bloodstream of freely moving animals eliminates the need for blood withdrawal in order to generate pharmacokinetics (PK) profiles in support of pharmaceutical drug discovery studies. In this study, SPME was applied for in vivo sampling in mice for the first time and enables the use of a single animal to construct the entire PK profile. In vivo SPME sampling procedure used commercial prototype single-use in vivo SPME probes with a biocompatible extractive coating and a polyurethane sampling interface designed to facilitate repeated sampling from the same animal. Pre-equilibrium in vivo SPME sampling, kinetic on-fibre standardization calibration and liquid chromatography–tandem mass spectrometry analysis (LC–MS/MS) were used to determine unbound and total circulating concentrations of carbamazepine (CBZ) and its active metabolite carbamazepine-10,11-epoxide (CBZEP) in mice (n = 7) after 2 mg/kg intravenous dosing. The method was linear in the range of 1–2000 ng/mL CBZ in whole blood with acceptable accuracy (93–97%) and precision (<17% RSD). The single dose PK results obtained using in vivo SPME sampling compare well to results obtained by serial automated blood sampling as well as by the more conventional method of terminal blood collection from multiple animals/time point. In vivo SPME offers the advantages of serial and repeated sampling from the same animal, speed, improved sample clean-up, decreased animal use and the ability to obtain both free and total drug concentrations from the same experiment.     

Comprehensive photokinetic and NMR study of a biphotochromic supermolecule involving two naphthopyrans linked to a central thiophene unit through acetylenic bonds

A photophysical and photochemical study of a biphotochromic compound where two naphthopyran units are linked by an acetylene-thiophene-acetylene bridge has been carried out in toluene. Both fluorescence and intersystem crossing to the triplet manifold were found to compete with the photocoloration process. Two photoproducts (transoid-trans and transoid-cis stereoisomers), absorbing at approximately 480 nm and corresponding to the opening of a single photochromic unit, were detected by spectrophotometric analysis after short irradiation time in diluted solution and identified by 1H-nuclear magnetic resonance (NMR) spectroscopy. After prolonged irradiation at 228 K of highly concentrated solutions (up to 3 x 10(-3) mol dm(-3)), two additional isomers, absorbing at approximately 550 nm, were formed. Their NMR spectra indicate the opening of both photochromic units. An interesting effect of selective vibronic excitation was found, showing that the photoreaction is favored at excited vibronic levels to the detriment of the radiative relaxation.     

Chemistry of constrained dioxocyclam ligands with Co(III): unusual examples of C-H and C-N bond cleavage

The reactions between H(2)dc3 and Co(acac)(3) have been studied in the presence and absence of base. In the presence of base, a complex with an intramolecular Co-C bond, Co(dc3-C-(8))(H(2)O), 1, is formed, presumably through heterolytic C-H bond activation. An X-ray crystallographic study demonstrates the presence of a Co-C bond and shows that the diazacyclooctane (daco) subunit adopts the chair-boat conformation with respect to the metal. The cobalt-carbon bond induces strain in the macrocycle as demonstrated by bond angles significantly deviating from tetrahedral. The (13)C NMR resonance of the carbon atom bound to cobalt (-10.5 ppm) suggests significant ionic character in the cobalt-carbon bond. However, we were unable to cleave this bond in the presence of strong acid. In the absence of base, the reaction of Co(acac)(3) with H(2)dc3 resulted in C-N cleavage of the ligand and the formation of a complex of dioxocyclam, Co(dc)(acac), 2. This complex has subsequently been prepared in high yield by the reaction of Co(acac)(3) with dioxocyclam. An X-ray crystallographic study demonstrates that dioxocyclam adopts the heretofore unreported cis configuration, having folded along a N-Co-N axis that is perpendicular to the Co-acac plane.     

Collisions at thermal energy between metastable hydrogen atoms and hydrogen molecules: total and differential cross sections

A metastable hydrogen (deuterium) atom source in which groundstate atoms produced by a RF discharge dissociator are bombarded by electrons, provides a relatively large amount of slow metastable atoms (velocity 3–5 km/s). Total integral cross sections for H*(D*)(2s) + H₂(X ¹Σ _g ⁺ ,v=0) collisions have been measured in a wide range of relative velocity (2,5–30 km/s), by using the attenuation method. A significant improvement of accuracy is obtained, with respect to previous measurements, at low relative velocities. Total cross sections for H* and D*, as functions of the relative velocity, are different, especially in the low velocity range. H* + H₂ total differential cross sections have also been measured, with an angular spread of 3.6°, for two different collision energy distributions, centered respectively at 100 meV and 390 meV. A first attempt of theoretical analysis of the cross sections, by means of an optical potential, is presented.     

The formation of propylene fumarate oligomers for use in bioerodible bone cement composites

Poly(propylene fumarate) (PPF) oligomers were synthesized by step polymerization using bis(2-hydroxypropyl fumarate) or propylene bis(hydrogen maleate) as starting materials. Oligomers possessing identical degrees of polymerization (DP), but varying in their end group character (either hydroxyl or carboxyl) were first prepared and characterized, then used as part of a bone cement preparation consisting of oligomer, tricalcium phosphate, calcium carbonate, and methyl methacrylate. Compressive strength of the resulting composite appeared to be dependent on both the degree of polymerization of the PPF, and the nature of the oligomers' end groups.     

THE INTERACTIONS OF PYRENYLMETHYL TRIBUTYLPHOSPHONIUM BROMIDE WITH SINGLE STRAND POLYNUCLEOTIDES

The binding of the water soluble derivative of pyrene, pyrenylmethyl tri-n-butylphosphonium bromide (PMTP), to single strand polynucleotides has been characterised by changes in the absorption spectra, fluorescence spectra, the fluorescence lifetime and the time-resolved fluorescence anisotropy of PMTP. For polyguanylic acid at low ionic strength, there are two modes of binding; external ionic binding and intercalation between the bases. The former results in PMTP excimer formation and the latter involves a charge-transfer complex between PMTP and guanine bases. Polyadenylic acid and polyinosinic acid show only external binding and poly[C] exhibits an interaction which is a combination of external binding and partial intercalation. Single strand DNA binds PMTP by intercalation and external binding at low ionic strength. In the presence of 0.2 M sodium chloride, only binding by intercalation between the bases occurs for poly[G]. Single strand DNA bound PMPT by partial intercalation, as well as full intercalation between the bases, but polyadenylic acid, polycytidylic acid and polyinosinic acid showed no significant binding in the presence of 0.2 M sodium chloride. The differences in the binding of PMTP are attributed to variations in the rigidity and form the structures of single strand polynucleotides adopt in solution. A full analysis of the binding isotherms has been made using methods based on Scatchard plots and the McGhee and von Hippel approach, which are critically compared.     

A molecular orbital study of trans-polyenes to 18 double bonds

Calculations involving molecular orbitals have appeared in the chemical literature over the past few years, but all have used smalltrans-polyenes. We now report extended Huckel molecular orbital calculations ontrans-polyenes of up to 18 double bonds (36 carbons and 38 hydrogen atoms). Information obtained from these calculations include total energies, bond gaps, and net charges on each atom. Also found is that the band gap approaches 1.41 eV as the number of double bonds approaches infinity. This value is quite close to reported experimental values. Data are also presented for polyenes assuming equal C-C bond lengths.     

2,5-Dimethylthiophene coordination to three metal centers in the complexes (η4, S-μ3-2,5-Me2T)(IrCp*) [M(CO)2Cp]2 where MMo or W

The 2,5-dimethylthiophene (2,5-Me₂T) ligand in the isomers Cp*Ir(η⁴-2,5-Me₂T) (1) and Cp*Ir(C,S-2,5-Me₂T) (2) is activated to react with the dimers Cp(CO)₂M?M(CO)₂Cp[M?Mo (3), W (4)] to give complexes (5,6) in which the thiophene is coordinated to three metals. Oxidation of 5 with Cp₂Fe⁺ removes the Mo dimer to give Cp*Ir(η⁵-2,5-Me₂T)²⁺. Reaction of 5 with CO displaces the Mo as [CpMo(CO)₃]₂ to give Cp*Ir(CO)(C,S-2,5-Me₂T) (7). Ultraviolet photolysis of 1 provides a convenient route to the ring-opened isomer 2. Despite the remarkable nature of the thiophene coordination in 5 and 6, its reactivity does not suggest new pathways that would lead to the hydrodesulfurization of thiophenes.     

Transition metal ion complexes of thiosemicarbazones derived from 2-acetylpyridineN-oxide. I. The 4-methyl derivative

Summary TheN-methyl-2-[1-(2-pyridinyl-1-oxide)ethylidene]hydrazinecarbothioamide, HLO4M, has been used to prepare a series of Co^III, Ni^II and Cu^II complexes. Species with two deprotonated LO4M ligands, one LO4M and one HLO4M ligand, two HLO4M ligands and one HLO4M ligand with two small anionic ligands have been isolated. The deprotonated LO4M bonds as a tridentate ligandvia theN-oxide oxygen, the imine nitrogen (N¹ and the sulphur while the HLO4M ligand coordinates primarily as a bidentate ligandvia only the first two atoms listed above. I.r., electronic, mass and e.s.r. spectra have been used to determine the nature of these complexes. One of the more striking differences between these compounds and those prepared with other thiosemicarbazones of 2-acetylpyridine and 2-acetylpyridineN-oxide is that tetrahedral yellow [Ni(HL)X₂] rather than planar brown [NiLX] (X=Cl or Br) solids have been isolated with this ligand. Other differences in the nature of the coordination spheres of the various metal ions occur with this particular ligand when compared to previously studied thiosemicarbazone complexes.NATO Fellow, on leave from Medical Faculty, Istanbul University.