Activation barriers in the homolytic cleavage of radicals and ion radicals

As revealed by several experimental examples, radicals and ion radicals may, in contrast with closed-shell molecules, undergo exothermic homolytic cleavages (.A..B --> A: +.B) with substantial activation barriers. A two-state semiclassical model is proposed for explaining the existence of the barrier and estimating its magnitude. It is based on the intersection of the potential energy surfaces characterizing the dissociation of a bonding state, .A..B -->.A. +.B, on one hand, and the approach to bonding distance of a repulsive state, A: +.B --> A therefore B, on the other. After inclusion of the bond cleavage and formation as Morse curves in the normal-mode analysis, a simple activation driving force relationship is obtained, the two main ingredients of the intrinsic barrier being the triplet excitation energy of the A moiety and the pi*--> sigma* excitation energy in .A-B. The model is then tested by quantum chemical calculations, first on a simplified system to evaluate the calculation techniques and then on a real system. A comparison of the model predictions with experiment is finally performed using the rate data recently gathered for the cleavage of 4-cyanophenyl alkyl ether anion radicals, which cover a respectable range of driving forces, showing satisfactory agreement between theoretical predictions and experimental data.     

A new Na/Mg inverse crown ether

A `missing' member of the inverse crown ether family, namely μ₄‐oxo‐tetrakis(μ‐2,2,6,6‐tetra­methyl­piperidinido)­di­mag­nes­ium­(II)­disodium(I), [Na₂Mg₂O(C₉H₁₈N)₄], has been synthesized by blocking the alternative aromatic metallation route via the use of sterically hindered 1,3,5‐mesityl­ene as a solvent. [Na₂Mg₂O(NR₂)₄] (NR₂ is 2,2,6,6‐tetra­methyl­piperidinide) is shown to form a cationic planar eight‐membered ring with alternating metal and N atoms, which captures at its core an oxide guest that lies on an inversion centre [principal dimensions: Na—O = 2.2405 (11) Å, Na—N = 2.445 (3) and 2.572 (3) Å, Mg—O = 1.8673 (9) Å, and Mg—N = 2.032 (2) and 2.063 (2) Å].     

Chemistry of constrained dioxocyclam ligands with Co(III): unusual examples of C-H and C-N bond cleavage

The reactions between H(2)dc3 and Co(acac)(3) have been studied in the presence and absence of base. In the presence of base, a complex with an intramolecular Co-C bond, Co(dc3-C-(8))(H(2)O), 1, is formed, presumably through heterolytic C-H bond activation. An X-ray crystallographic study demonstrates the presence of a Co-C bond and shows that the diazacyclooctane (daco) subunit adopts the chair-boat conformation with respect to the metal. The cobalt-carbon bond induces strain in the macrocycle as demonstrated by bond angles significantly deviating from tetrahedral. The (13)C NMR resonance of the carbon atom bound to cobalt (-10.5 ppm) suggests significant ionic character in the cobalt-carbon bond. However, we were unable to cleave this bond in the presence of strong acid. In the absence of base, the reaction of Co(acac)(3) with H(2)dc3 resulted in C-N cleavage of the ligand and the formation of a complex of dioxocyclam, Co(dc)(acac), 2. This complex has subsequently been prepared in high yield by the reaction of Co(acac)(3) with dioxocyclam. An X-ray crystallographic study demonstrates that dioxocyclam adopts the heretofore unreported cis configuration, having folded along a N-Co-N axis that is perpendicular to the Co-acac plane.     

Asymmetric synthesis of 4,4-disubstituted-2-imidazoli-dinones: potent NK1 antagonists

[structure: see text] A highly efficient and practical synthesis of 4,4-Disubstituted-2-Imidazolidinones utilizing a "self-reproduction of the center of chirality" strategy is described.     

Hydrodynamic voltammetry at the liquid|liquid interface: facilitated ion transfer and the rotating diffusion cell

A new approach to the voltammetric investigation of facilitated ion transfer processes is reported. The technique uses a rotating diffusion cell approach to induce laminar flow in the organic phase of a liquid|liquid electrochemical cell. The interface between two immiscible electrolyte solutions (ITIES) was stabilised against rotation with either γ-alumina or a track-etched polyester membrane. The resultant voltammetry is shown to be consistent with the Koutecký–Levich equation enabling kinetic parameters associated with facilitated transfer of sodium by dibenzo-18-crown-6 across the water|1,2-dichloroethane interface to be evaluated. In particular, the use of the more hydrophilic alumina membrane permits the uncertainties regarding the use of the membrane-stabilised ITIES, namely the interfacial position, to be eliminated.     

Diffusion coefficients of the monomer and oligomers in hydroxyethyl methacrylate

The diffusion coefficients are reported of rubbery ternary systems consisting of the polymer, its monomer analogue (i.e., the saturated equivalent of the monomer), and trace quantities of oligomers (dimer, trimer, tetramer and hexamer) for 2‐hydroxyethyl methacrylate (HEMA). These have been obtained with pulsed‐field‐gradient NMR spectroscopy with a polymer weight fraction (f_p) of 0 ≤ f_p ≤ 0.4. The oligomers are macromonomers synthesized with a cobalt catalytic chain‐transfer agent. The diffusion coefficients are about an order of magnitude smaller than those for monomers such as methyl methacrylate; this effect is ascribed to hydrogen bonding in HEMA. The diffusion coefficient D_i of an i‐meric oligomer has been fitted with moderate accuracy by an empirical universal scaling relation, D_i(f_p)/D₁(f_p) ≈ i, previously found to provide an adequate fit to corresponding data for styrene and for methyl and butyl methacrylates. The approximate empirical scaling relation seems to hold for a remarkably wide range of types of monomer/polymer systems. These results are of use in modeling rates and molecular weight distributions in free‐radical polymerization, particularly for termination (which is chain‐length‐dependent and is controlled by the diffusion coefficient of chains of the low degrees of polymerization studied here). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2491–2501, 2003     

A method for the determination of d-kynurenine in biological tissues

d-Kynurenine (d-KYN), a metabolite of d-tryptophan, can serve as the bioprecursor of kynurenic acid (KYNA) and 3-hydroxykynurenine, two neuroactive compounds that are believed to play a role in the pathophysiology of several neurological and psychiatric diseases. In order to investigate the possible presence of d-KYN in biological tissues, we developed a novel assay based on the conversion of d-KYN to KYNA by purified d-amino acid oxidase (d-AAO). Samples were incubated with d-AAO under optimal conditions for measuring d-AAO activity (100 mM borate buffer, pH 9.0), and newly produced KYNA was detected by high-performance liquid chromatography (HPLC) with fluorimetric detection. The detection limit for d-KYN was 300 fmol, and linearity of the assay was ascertained up to 300 pmol. No assay interference was noted when other d-amino acids, including d-serine and d-aspartate, were present in the incubation mixture at 50-fold higher concentrations than d-KYN. Using this new method, d-KYN was readily detected in the brain, liver, and plasma of mice treated systemically with d-KYN (300 mg/kg). In these experiments, enantioselectivity was confirmed by determining total kynurenine levels in the same samples using a conventional HPLC assay. Availability of a sensitive, specific, and simple method for d-KYN measurement will be instrumental for evaluating whether d-KYN should be considered for a role in physiology and pathology.     

The surface charge of regenerated cellulose fibres

In this paper the influence of charged species on the sheet strength of viscose fibres was investigated. Four samples of chemical modified viscose fibres, as well as a reference fibre were studied. The swelling of these viscose fibres and the breaking length of hand sheets have been determined. Comparing the results, the influence of both, swelling and surface charge on the bonding force, is evident. The allocation of the charges, induced by cationic starch and Carboxmethylcellulose, has been analyzed by Titration, attenuated total reflection spectroscopy (ATR) and X-ray photoelectron spectroscopy (XPS). Titration was used to make a first estimation of the charge distribution within the fibre. Using ATR and XPS, more detailed information about the surface charge has been achieved. All measurement methods showed a significant amount of charge on the fibre surface.     

Laser ionization of H2S and ion-molecule reactions of H3S+ in laser-based ion mobility spectrometry and drift cell time-of-flight mass spectrometry

The detection of hydrogen sulfide (H₂S) by 2?+?1 resonance-enhanced multi-photon ionization (REMPI) and the application of H₂S as a laser dopant for the detection of polar compounds in laser ion mobility (IM) spectrometry at atmospheric pressure were investigated. Underlying ionization mechanisms were elucidated by additional studies employing a drift cell interfaced to a time-of-flight mass spectrometer. Depending on the pressure, the primary ions H₂S⁺, HS⁺, S⁺, and secondary ions, such as H₃S⁺, were observed. The 2?+?1 REMPI spectrum of H₂S near λ?=?302.5 nm was recorded at atmospheric pressure. Furthermore, the limit of detection and the linear range were established. In the second part of the work, H₂S was investigated as an H₂O analogous laser dopant for the ionization of polar substances by proton transfer. H₂S exhibits a proton affinity (PA) similar to that of H₂O, but a significantly lower ionization energy facilitating laser ionization. Ion-molecule reactions (IMR) of H₃S⁺ with a variety of polar substances with PA between 754.6 and 841.6 kJ/mol were investigated. Representatives of different compound classes, including alcohols, ketones, esters, and nitroaromatics were analyzed. The IM spectra resulting from IMR of H₃S⁺ and H₃O⁺ with these substances are similar in structure, i.e., protonated monomer and dimer ion peaks are found depending on the analyte concentration.