Scanning mirror on a vibrating membrane for dynamic optical trapping

A study of the variation of the spectral shape and the harmonic distribution of the high-order harmonics generated from silver plasma on the frequency chirp of the driving laser radiation (793 nm 48 fs) is reported. The results of the systematic study of the harmonic generation from the 21st order up to the 61st order (λ=13 nm) are presented. A tuning of the harmonic wavelength up to 0.8 nm can be accomplished by variation of the laser chirp. PACS 42.65.Ky; 42.79.Nv; 52.38.Mf     

The influence of the oxygen exposure on the thermal faceting of W[1 1 1] tip

The oxygen induced faceting of the macroscopic W[1 1 1] tip has been studied for oxygen exposures in the range 0.5-31 L and annealing temperatures 800-1800 K using the field ion microscopy (FIM) technique. After annealing at temperatures lower than 800 K, higher than 1850 K or for exposures lower than 0.5 L faceting was not observed. For exposures 0.5-1.9 L and annealing temperatures 800-1600 K well developed {1 1 2} facets with sharp edges formed. For exposures higher than 2.0 L edges of the {1 1 2} facets were broadening and disappearing, what has been attributed to the formation of three-dimensional tungsten oxides. The oxides could be easily removed by annealing the tip at 1700 K, what leads to formation of sharp facet edges. On the basis of these results a modified procedure of the ultrasharp tip fabrication has been proposed.     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

X-PEEM/NEXAFS and AFM of polypyrrole and copper micro-patterns on insulating fluoropolymer substrates

Micro-patterns (80 μm and 10 μm) of copper and semi-conducting polypyrrole on insulating fluorinated ethylene propylene substrates were characterized using synchrotron-based X-ray Photoemission Electron Microscopy (X-PEEM), Near Edge X-ray Absorption Fine Structure (NEXAFS), and Atomic Force Microscopy (AFM). Electronic states in the polypyrrole are verified using the NEXAFS data, and sample degradation upon irradiation is addressed. X-PEEM images show homogeneous distributions of the corresponding elements in the patterns. They do not exhibit dichroic effects and give information about the growth of copper and polypyrrole (i.e. nucleation of Cu, overgrowth of PPy, formation of PPy granules). AFM results are used to verify the topography of the patterns and support the findings on pattern growth.     

In situ preparation of Bi-Sr-Ca-Cu-O superconducting films by laser sputtering

Superconducting films of Bi-Sr-Ca-Cu-O on (100) MgO substrates have been fabricated by XeCl-excimer-laser sputtering from ceramic targets of Bi_2.5Sr₂Ca₂Cu₃O_y in O₂ atmosphere. The films were polycrystalline with the c-axis (30.80±0.02Å) preferably oriented normal to the substrate surface. Without post-annealing the films showed metallic resistance behavior with zero resistance temperatures of up to T_c(0) }- 79 K. The critical current density of the films had values of up to j_c(50K)}- 10⁴ A/cm².     

Multiferroic TbMnO3 nanoparticles

We report on the synthesis of TbMnO₃ nanoparticles by chemical co-precipitation route and their structural, chemical bonding, magnetic and dielectric properties. It is shown that the interesting multiferroic properties of this system as reflected by the concurrent occurrence of magnetic and dielectric transitions are retained in the nanoparticles (size∼40 nm). However, the nanoparticle constitution and properties are seen to depend significantly on the calcination temperature. While the nanoparticles obtained by calcination at 800 °C correspond very well with the reported properties of single phase TbMnO₃ (all the key magnetic and dielectric features near 7, 27 and 41 K, albeit with reduced dielectric constant) the nanoparticles obtained by calcination at 900 °C develop a Tb deficient skin which softens the transitions, reducing the dielectric constant further.     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.