New synthesis of 2,4-dialkyl(or diaryl)pyrazolo[1,5-a]-1,3,5-triazines

Reactions of monothiodiacylamines or N-aroylthioimidates with 3-aminopyrazoles gave pyrazolo[1,5-a]-1,3,5-triazines in good yields.     

Photodissociation of dimethylnitrosamine

Photodissociation of (CH₃)₂N-NO following S₁(nπ^*) ← S₀ excitation yields (CH₃)₂N^? and NO with a quantum yield of 1.03 ± 0.10. These fragments recombine leaving no stable photopioducts. A fraction of NO produced by photolysis is vibrationally excited. The rate of the NO(v = 1) relaxation in collision with (CH₃)₂N-NO, measured by IR fluorescence, is (1.47 ± 0.03) × 10⁴ s^?1 Torr^?1.     

Accurately solving the electronic Schrodinger equation of small atoms and molecules using explicitly correlated (r12-)MR-CI. VIII. Valence excited states of methylene (CH2)

We compute the adiabatic transition energies of methylene (CH(2)) from the ground state to the lowest electronically excited valence states using the r(12)-MR-ACPF-2 method with a large basis set and an extended reference space. We recall that this method aims at reaching the basis-set and full configuration interaction (CI) limits simultaneously. Our best excitation energies, T(e) (T(0)), are 9.22 (8.87) (a (1)A(1), corrected for relativistic and adiabatic effects), 31.98 (31.86) (b (1)B(1)), and 57.62 (57.18) kcal mol(-1) (c (1)A(1)) (both uncorrected). We are able to reach the respective basis-set limits that closely that the remaining errors of our (uncorrected) calculations are clearly due to the MR-ACPF-2 method. While we are unable to assess the error of the latter method in a systematic way, we still believe that it is rather unlikely that the errors of our excitation energies exceed +/-0.10 kcal mol(-1). We finally observe that our (corrected) a state values deviate by only -0.10 (-0.10) kcal mol(-1) from the results of Csaszar et al. [J. Chem. Phys. 118, 10631 (2003)]--who did careful extrapolations to the valence full-CI and basis-set limits and added a correction for the core correlation--and that the deviation from experiment is only -0.13 (-0.13) kcal mol(-1). From these excellent agreements we conclude that our excitation energies to the b and c states are similarly accurate.     

High-speed peak matching algorithm for retention time alignment of gas chromatographic data for chemometric analysis

A rapid retention time alignment algorithm was developed as a preprocessing utility to be used prior to chemometric analysis of large datasets of diesel fuel profiles obtained using gas chromatography (GC). Retention time variation from chromatogram-to-chromatogram has been a significant impediment against the use of chemometric techniques in the analysis of chromatographic data due to the inability of current chemometric techniques to correctly model information that shifts from variable to variable within a dataset. The alignment algorithm developed is shown to increase the efficacy of pattern recognition methods applied to diesel fuel chromatograms by retaining chemical selectivity while reducing chromatogram-to-chromatogram retention time variations and to do so on a time scale that makes analysis of large sets of chromatographic data practical. Two sets of diesel fuel gas chromatograms were studied using the novel alignment algorithm followed by principal component analysis (PCA). In the first study, retention times for corresponding chromatographic peaks in 60 chromatograms varied by as much as 300 ms between chromatograms before alignment. In the second study of 42 chromatograms, the retention time shifting exhibited was on the order of 10 s between corresponding chromatographic peaks, and required a coarse retention time correction prior to alignment with the algorithm. In both cases, an increase in retention time precision afforded by the algorithm was clearly visible in plots of overlaid chromatograms before and then after applying the retention time alignment algorithm. Using the alignment algorithm, the standard deviation for corresponding peak retention times following alignment was 17 ms throughout a given chromatogram, corresponding to a relative standard deviation of 0.003% at an average retention time of 8 min. This level of retention time precision is a 5-fold improvement over the retention time precision initially provided by a state-of-the-art GC instrument equipped with electronic pressure control and was critical to the performance of the chemometric analysis. This increase in retention time precision does not come at the expense of chemical selectivity, since the PCA results suggest that essentially all of the chemical selectivity is preserved. Cluster resolution between dissimilar groups of diesel fuel chromatograms in a two-dimensional scores space generated with PCA is shown to substantially increase after alignment. The alignment method is robust against missing or extra peaks relative to a target chromatogram used in the alignment, and operates at high speed, requiring roughly 1 s of computation time per GC chromatogram.     

Preparation of epitaxial La0.6Ca0.4Mn1−xFexO3 (x = 0, 0.2) thin films: Variation of the oxygen content

Perovskite thin films with a nominal composition of La_0.6Ca_0.4Mn_1−xFe_xO₃ (x = 0, 0.2) were deposited by pulsed reactive crossed beam laser ablation. The film properties, such as electrical conductivity and magnetoresistance are studied as a function of the oxygen content and substrate type. The oxygen content of the thin films was determined by Rutherford Backscattering and controlled by varying the background gas pressure, pressure of the gas pulse and by using alternatively O₂ and N₂O as the gas pulse.

LaAlO₃ and SrTiO₃ were used as substrates at deposition temperature of 650 °C. The grown films were analyzed by X-ray diffraction in order to optimize the growth conditions, i.e. to obtain epitaxial thin films. Thin films doped with 20% Fe were grown under the same experimental conditions as the undoped LCMO films and the effect of the doping on the structural and transport properties of the thin films has been investigated.

The temperature of the metal–insulator transition was measured as a function of the oxygen content and substrate type.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

In situ Raman studies on lithiated single-wall carbon nanotubes in liquid ammonia

The charge transfer induced lithiation of single-wall carbon nanotubes (SWNTs) was investigated by in situ monitoring by Raman spectroscopy as lithium was added incrementally to a dispersion of SWNTs in liquid ammonia. Charge transfer from liquid ammonia solvated lithium to the SWNTs led to intercalation of lithium into the SWNT ropes, as well as to the semi-covalent lithiation of the SWNTs. Raman spectra of the SWNTs recorded as lithium was added showed a 30 wavenumber downshift of the G band (1594 cm⁻¹) with the concomitant appearance of a new peak at 1350 cm⁻¹ that was assigned as the signature of the lithiated SWNTs. Addition of 1-iodododecane to the lithiated SWNTs resulted in the covalent attachment of dodecyl groups. The intercalation of lithium throughout the SWNT ropes led to complete dodecylation of all individual SWNTs.     

Nucleation and growtn of polythiophene films on gold electrodes

The nucleation and growth of polythiophene films on gold electrodes has been studied using potentiostatic steps. The mechanism has been deduced and estimates made of the kinetic parameters. Dissolution of the gold substrate at potentials where thiophene polymerisation occurs is suppressed by the initial rapid formation of a monolayer of polymer. The data indicate that formation of bulk film occurs by the instantaneous nucleation and three-dimensional growth of polymer on top of this monolayer. Rate constants for growth parallel to the surface on the bare gold substrate and the covering polymer layer are surprisingly very similar. Growth perpendicular to the surface is slightly more rapid, typically by a factor of 1.5–3, although it is less dependent on potential. The high density of nuclei results in their overlap at an early stage, after which growth is only possible perpendicular to the surface. Within a narrow potential range, the observation of maxima and minima in current-time transients is interpreted in terms of the “death” and “rebirth” of growing centres.     

Synthetic entries to 6-fluoro-7-substituted indole derivatives

Three practical synthetic entries of functionalized 6-fluoro-7-substituted indole derivatives were developed in connection with the preparation of 7-fluoro-8-substituted-1,3,4,9-tetrahydropyrano[3,4-b]indole-1-acetic acid derivatives 11 . The first route, which permits group modification about position 8 of the pyranoindole skeleton, employs 2-bromo-3-fluoroaniline ( 18 ) as a key intermediate, the preparation of which was achieved by either a novel ortho metalation of 15 or via the intermediacy of 22 . The second route utilizes 32 to append a terminally functionalized three carbon side chain onto the indole template and in addition leads to 43 from 40 . The third route to the 7-fluoro-8-substituted-pyranoindole skeleton complements route two in that the synthetic pathway exploits 32 in a nucleophilic fashion to construct a terminally functionalized two carbon appendage onto the indole nucleus.