Potassium-selective optrode based on an immobilized fluorogenic crown ether

A new optical sensor phase for potassium ions has been developed based on the immobilization of the pH-dependent fluorogenic crown ether 4-acryloylamidobenzo-18-crown-6 on the non-ionic polymeric resin Amberlite XAD-2.Two different optical designs, a flow-through sensor and a fibre optic probetype sensor (optrode), have been constructed and their analytical performance characteristics have been evaluated. The resulting fluorimetric sensors for K⁺ ions exhibited detection limits of 0.4 or 0.8 M of K⁺ (16 g/l or 31 g/l), depending on the design, while the linear response occurred from 1 to 25 M of the metal concentrations. The precision, evaluated as the relative standard deviation of measurements of K⁺ levels at around ten times the detection limit (e.g. 5 M), turned out to be around ±2%.Advantageous features of this fluorimetric sensing phase and optrode include ease of construction, simplicity of use, reversibility, short response times (ca. 1 min full scale deflection) selectivity and operational stability, suitable for sensing potassium at low levels in complex matrices such as biological fluids.The fluorimetric optical sensor has been successfully applied to the direct determination of potassium in clinically important samples (serum and urine) and in natural waters. Very good accuracy has been obtained just using adequate synthetic aqueous potassium standards for calibration.     

Chemistry of dithiocarbamate derivatives of amino acids. Part II. Complexes of nickel(II) with derivatives of branched and cyclic amino acids

Summary Barium salts of the dithiocarbamate derivates of the amino acids: DL-valine, L-valine, DL-leucine, DL-isoleucine and L-proline have been synthesized. The anions have been used to obtain the corresponding nickel(II) complexes in acid form. The complexes are diamagnetic, and coordination takes place in a near-square planar geometry around the nickel(II) ion through the sulphur atoms of the dithiocarbamate moiety, the structure being confirmed by i.r.,¹H n.m.r., u.v.-vis spectros copies and by chemical analysis.No significant difference has been found between the physicochemical properties (i.r. and 'H n.m.r. spectra and magnetic properties) of the complexes prepared from the dithiocarbamate derivatives of DL- and L-valine, but d-d bands in the u.v.-vis spectra show a slight different intensity.     

Electrochemical detector with a 20 nl volume for micro-columns liquid chromatography

Summary A flow-through two electrode wall-jet cell with a platinum measuring electrode and a cell volume of 20 nl has been designed and evaluated. It has been used to detect phenols by reversed phase liquid chromatography using short micro bore columns. The linear dynamic range between the measured current and the concentration is greater than 10³ (1.5×10^–7–5×10^–4 mol/l) and the minimum analyzable amount was found to be 10 pg for pyrocatechol. A negligible broadening in the detector permits the use of micro columns down to 0.5 mm internal diameter, packed with 5 m particles, without any substantial distortion of eluted zones.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Hydration of acetylene on Cd2+ exchanged zeolites

The reaction takes place on Cd-containing Lewis sites, whereas the irreversible adsorption and condensation of product acetaldehyde on acidic OH groups of Cd-X, FAU catalyst results in deactivation. Preadsorbed ammonia moderates the deactivation, because it reacts with acetylene, and pyridine homologues are formed which block the accessible OH groups. Since in divalent cationic forms of clinoptilolite no OH groups are generated, Cd-clinoptilolite proved to be a catalyst of permanent activity.

---

, Cd, — OH FAU, Cd-X. , .. , OH . OH, Cd- .

     

Pulsed versus continuous laser multiphoton dissociation of iodobenzene cations

In the two-photon visible dissociation of the iodobenzene cation, laser pulse shape is unimportant when collisional relaxation is slow compared to the time between pulses but becomes important when the relaxation rate is comparable to time between pulses. The dissociation can be simulated using an internal energy-governed computer model.     

Determination of traces of cadmium in alloy steels by anodic stripping voltammetry

Concentrations of cadmium of the order of 0.1 ppm in alloy steels containing large concentrations of chromium and nickel (ca. 17 and 13% respectively), about 0.1% of copper and a number of metals at low concentrations, were determined by anodic stripping voltammetry with a hanging mercury-drop electrode in 1M hydrochloric acid. Cadmium was separated on Dowex 50W-X8 cation-exchanger in a medium at pH 1.3 containing excess of EDTA. Mercury-film electrodes cannot be used for this determination, because the peak for cadmium is distorted by evolution of hydrogen on the electrode support. The relative standard deviation of the determination of 0.44 ppm of cadmium in steel is 3.2% and the confidence limits for 95% probability are 0.44 +/- 0.02 ppm. The error in the cadmium recovery does not exceed + 8%.     

Calculation of the 1J(PP) angular dependence in P2H4

Using the results obtained from an MO SCF ab initio calculation on P₂H₄ in four different conformations, the ¹J(PP) NMR coupling constants have been calculated. The ¹J(PP) values are highly dependent upon the rotational angle φ (?238.0 Hz in the eclipsed conformation, 10.9 Hz in the staggered one). The shape of the theoretical ¹J(PP) plot seems to be in good agreement with experimentally measured ¹J(PP) values.     

Catalytic enantioselective indium-mediated allylation of hydrazones

[reaction: see text] A facile and highly selective indium-mediated allylation of hydrazones utilizing BINOL ligands is described. Chiral (R)-3,3'-bistrifluoromethylBINOL afforded homoallylic amines in up to 97% ee with stoichiometric ligand. Employing only 10 mol % ligand afforded selectivity of up to 92% ee.     

Beer Digestions for Metal Determination by Atomic Spectrometry and Residual Organic Matter

Many standard and official sample digestion procedures for trace metal determination are carried out in open vessels on hot plates. A new procedure for the determination of trace metals by flame atomic absorption spectrometry or inductively coupled plasmaatomic emission spectrometry in beer samples was developed to be performed in closed reactors assisted by microwaves. The results are compared with the ones obtained by other procedures by means of the analysis of the variance. The differences between the procedures are attributed to residual organic matter. Voltammetry, absorption molecular spectrophotometry and high pressure liquid chromatography with a photodiode array detector are used to study the nature of these residues. Nitrobenzoic acids, phenolic acids and other organic compounds are often present after digestion. The results obtained are related to the precision in metal determination by atomic spectrometry. The need for elaboration of certified reference materials for trace metals in beer is suggested.     

Mechanism of host-guest complexation by cucurbituril

The factors affecting host-guest complexation between the molecular container compound cucurbit[6]uril (CB6) and various guests in aqueous solution are studied, and a detailed complexation mechanism in the presence of cations is derived. The formation of the supramolecular complex is studied in detail for cyclohexylmethylammonium ion as guest. The kinetics and thermodynamics of complexation is monitored by NMR as a function of temperature, salt concentration, and cation size. The binding constants and the ingression rate constants decrease with increasing salt concentration and cation-binding constant, in agreement with a competitive binding of the ammonium site of the guest and the metal cation with the ureido carbonyl portals of CB6. Studies as a function of guest size indicate that the effective container volume of the CB6 cavity is approximately 105 A(3). It is suggested that larger guests are excluded for two reasons: a high activation barrier for ingression imposed by the tight CB6 portals and a destabilization of the complex due to steric repulsion inside. For example, in the case of the nearly spherical azoalkane homologues 2,3-diazabicyclo[2.2.1]hept-2-ene (DBH, volume ca. 96 A(3)) and 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO, volume ca. 110 A(3)), the former forms the CB6 complex promptly with a sizable binding constant (1300 M(-1)), while the latter does not form a complex even after several months at optimized complexation conditions. Molecular mechanics calculations are performed for several CB6/guest complexes. A qualitative agreement is found between experimental and calculated activation energies for ingression as a function of both guest size and state of protonation. The potential role of constrictive binding by CB6 is discussed.