Polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine in aprotic solvents I. Reaction variables

The solution polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine to form poly(amide acid amine) was investigated under a variety of reaction conditions. Polymer viscosity and gel formation were highly affected by changes in the order of monomer addition, the type of process (powder or solution), monomer concentration, monomer stoichiometry, and type of solvent. Minor effects were noted with changes in polymerization temperature and the presence of small amounts of water. A limiting intrinsic viscosity of 1.2–1.5 dl/g was observed, regardless of polymerization conditions. The polymerization had a strong tendency to gel at high concentrations and when monomer molar ratios approached 1:1. The conditions which retarded or promoted the formation of macrogel were well-defined, and macrogel but not microgel could be prevented. The polymerization was conducted successfully only in aprotic solvents. No imidazopyrrol-one units were detected in polymer made in polyphosphoric acid at elevated temperatures.     

RECOVERY OF HAEMOPHILUS INFLUENZAE FROM ULTRAVIOLET AND X-RAY DAMAGE

Abstract— Results of experiments on reactivation of ultraviolet (u.v.)-irradiated Haemophilus influenzae and cellular reactivation of u.v.-damaged transforming deoxyribonucleic acid (DNA) and bacteriophage are reported. Liquid-holding recovery (LHR) is small for the u.v.-sensitive mutant BC100 which, relative to the wild type, also has greatly reduced host-cell reactivation (HCR) of u.v.-inactivated phage, and competent cultures show reduced competent cell reactivation (CCR) of u.v.-inactivated transforming DNA. BC100 cells can be transformed with DNA isolated from the wild type strain Rd to a u.v. resistance similar to that of Rd, and irradiation of the DNA reduces the transformation frequency for this marker (uvr). The u.v.-resistant mutant BC200 displays very little LHR under the usual conditions where reactivation occurs after plating. The colony-forming ability (cfa) of irradiated BC200 is greater than that of Rd, but HCR and CCR are the same on this mutant as on the wild type. The major difference between Rd and BC200 is the enhanced u.v. survival of cfa of the latter. It was determined that this difference reflects cell lysis of irradiated Rd and lack of lysis in BC200 cultures. That lysis is closely correlated with damage to the bacterial chromosome is suggested by the finding that the lytic response of Rd (as determined turbidimetrically) can be negated by the liquid-holding procedure, but lysis of BC100 (which lacks comparable DNA-repair ability) can be only partially inhibited by this procedure. LHR occurs when post-plating dark recovery is incomplete, is temperature-sensitive, and occurs unimpeded when post-u.v. protein synthesis is inhibited by chloramphenicol. It is suggested that enzymatically catalyzed reactivation of DNA occurs or is initiated during liquid-holding of u.v.-irradiated H. influenzae Rd and that the necessary enzyme(s) exists prior to appearance of u.v. lesions in the DNA. Results are reported for X-ray inactivation of transforming DNA as assayed on BC100, Rd and BC200 and of the cfa of the three strains.     

A hydrodynamic voltammetric study of the ferricyanide/ferrocyanide system with convective electrodes of platinum,gold, glassy carbon,carbon film,and boron carbide

Hydrodynamic voltammetry employing empirically determined mass transport coefficients is used to determine heterogeneous rate constants and transport coefficients for the ferricyanide/ferrocyanide system in 0.1 M phosphate buffer and other supporting electrolytes with turbulent tubular and rotated disk electrodes of platinum, gold, glassy carbon, carbon film, and boron carbide. Different kinetic parameters are obtained at the various electrode materials. For the platinum, gold, and boron carbide electrodes, the magnitudes of the rate parameters depend on scan direction. The nature of this hysteresis varies with the electrode material and is explained in terms of adsorbed oxide and ionic layers or other phenomena not described by simple double layer theory.     

MO-LCAO-Calculations on polymethines. V. PPP-type calculations and configuration analyses of simple prototype dyes in terms of molecular subsystems

In order to elucidate certain controversies in interpreting the π-electronic structure of some simple quinone and indigo dyes the Pariser–Parr–Pople SC _β,γ-wave-functions have been subjected to configuration analyses. Whereas 2,5-diamino-quinone (1) can be excellently represented by coupling of two trimethine-merocyanine chains, the analogous consideration is less appropriate with bispyrrolindigo (2). In this case the results of the configuration analyses indicate clearly the limited applicability of the Longuet/Higgins–Murrell–method.     

Alkylation d'anions ambidents en catalyse par transfert de phase. Cas des hydroxypyridines

Alkylation of ambident-anions derived from 2- and 4-pyridones yield by phase transfer catalysis, 80% of N-substitution and 20% of O-substitution. Change of salts, solvents, temperature and alkyl halide do not interfere very much with the N- and O-alkylation percentage of substitution. Overall yields range from 40 to 80% with primary or secondary alkyl halides.     

Extra-atomic relaxation energies for the 3d-transition metal series obtained with SCF hole-state calculations

A method to calculate extra-atomic relaxation energies is presented. It is based on the use of SCF hole-state calculations. The E_R^ea (2s) and E_R^ea (2p) values obtained for the 3d-transition metal series are in fair agreement with experimental values.     

Energy dependence of SF6 dissociation by pulsed CO2 laser radiation

The fractional dissociation,³²Γ, of ³²SF₆ by the output of a pulsed TEA CO₂ laser has been found to depend upon Φ, the total integrated laser intensity, as ³²Γ ∞ Φ^m for both the P(20) and P(16) laser lines, where m ≈ 3 in the range 2 < Φ < 7.2 J/cm² and increases from 3 to ≈ 4 as Φ is reduced from 2 to 0.9 J/cm².     

Partial purification of active delta and epsilon subunits of the membrane ATPase from escherichia coli.

We have partially purified active delta and epsilon subunits of the E. coli membrane-bound Mg2+-ATPase (ECF1). Treating purified ECF1 with 50% pyridine precipitates the major subunits (alpha, beta, and gamma) of the enzyme, but the two minor subunits (delta and epsilon), which are present in relatively small amounts, remain in solution. The delta and epsilon subunits were then resolved from one another by anion exchange chromatography. The partially purified epsilon strongly inhibits the hydrolytic activity of ECF1. The epsilon fraction inhibits both the highly purified five-subunit ATPase and the enzyme deficient in the delta subunit. The latter result indicates that the delta subunit is not required for inhibition by epsilon. By contrast, two-subunit enzyme, consisting chiefly of the alpha and beta subunits, was insensitive to the ATPase inhibitor, suggesting that the gamma subunit may be required for inhibition by epsilon. The partially purified delta subunit restored the capacity of ATPase deficient in delta to recombine with ATPase-depleted membranes and to reconstitute ATP-dependent transhydrogenase. Previously we reported (Biochem, Biophys. Res. Commun. 62:764 [1975]) that a fraction containing both the delta and epsilon subunits of ECF1 restored the capacity of ATPase missing delta to recombine with depleted membranes and to function as a coupling factor in oxidative phosphorylation and for the energized transhydrogenase. These reconstitution experiments using isolated subunits provide rather substantial evidence that the delta subunit is essential for attaching the ATPase to the membrane and that the epsilon subunit has a regulatory function as an inhibitor of the ATPase activity of ECF1.