Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

High-temperature expansions to fifteenth order

High-temperature series expansions of the susceptibility and second moment to 15th order are calculated for zero external field on the linear chain (LC), plane square (PSQ), simple cubic (SC), and body-centered cubic (BCC) lattices. Checks for specific models against pertinent work in the literature are detailed.     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Co-Segregation Effects on Boundary Migration

We analyze the effect of co-segregation on the mobility of grain boundaries within the framework of the impurity drag theory originally proposed by Cahn and Lücke and Stüwe for an ideal solution. The new derivation extends this model to the case where there are two types of impurities (or three components in the alloy). Since the resultant expression for the boundary mobility is complicated, numerical solutions were obtained for several cases to show how co-segregation affects the boundary mobility. Depending on the relative diffusivities of the two impurities which are both attracted to the boundary, the mobility may either increase or decrease with increasing concentration of one of the impurities. When one of the impurities is attracted to the boundary and the other repelled from the boundary, increasing the concentration of the attractive impurity can lead to a sharp decrease in the boundary mobility.     

Modified Three-Dimensional Formulations of Bending Problems of Homogeneous Plates and Beams under Complex Fixing Conditions

Modified three-dimensional formulations of bending problems of homogeneous elastic plates and beams are considered. Modification of the known three-dimensional formulations reduces to using additional constraints imposed on displacement functions. An advantage of the formulations proposed is that complex fixing conditions of plates and beams can be taken into account.     

Dynamic holograms and optical limiting: Asymmetric two-wave interactions

The conditions for obtaining a high efficiency of energy exchange upon two-wave interactions in dynamic holograms are found by analysis and numerical simulation of a system of nonlinear equations. Use of an asymmetric scheme of beam interaction in a medium with two nonlinearities, one of which determines the amplitude and relaxation time of a grating and the other of which provides phase modulation of the interacting beams, is proposed. It is shown that such a scheme in combination with the specific properties of a medium makes it possible to radically reduce the requirements for the nonlinearity of a medium and the intensity of a light flux in limiting systems, as well as to significantly decrease the time of the transition process. As a result, it becomes possible to attain an efficiency of energy transfer higher than 90% and to increase the corresponding attenuation of a high-power beam by almost two orders of magnitude, which is of interest for optical limiting of intense light fluxes.     

The effect of traffic noise on sleep of young adults in their homes

The disturbance of sleep by traffic noise is a major problem area in noise pollution. Extensive laboratory tests using multichannel electroencephalograms (EEG) have been carried out by many workers to determine the general response of people when exposed to noise during sleep. An experimental technique for obtaining results in people's homes has been developed using a simplified one-channel EEG. The responses of six people in the age range 19-24 were measured. A significant correlation was found between sleep disturbance and traffic noise when the noise is expressed in EPNdB. In the home experiments the subjects appeared to be approximately 10 dB less sensitive to noises than laboratory subjects for similar noise exposure. There also appeared to be some adaptation to the noise exposure; however, only one subject was tested for a period of 20 days and was insufficient to give definite results on adaptation.     

Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.