Mesoporous micelle templated silica with incorporated C<Subscript>8</Subscript> and C<Subscript>18</Subscript> phase

Mesoporous silica material of MCM-41 type was synthesized by co-condensation of highly concentrated octyltriethoxysilane (OTEOS), octadecyltriethoxysilane (ODTEOS) and tetraethoxysilane (TEOS). The obtained hybrid materials were characterized using XRD, TG-DSC and low temperature adsorption/desorption of nitrogen. It was shown that the applied method of synthesis allows to obtain silica of MCM-41 type with a high degree of hydrocarbon saturation.     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

The oxymercuration—demercuration of alkenylsilanes in aqueous tetrahydrofuran

The oxymercuration—demercuration (OM—DM) of representative trimethylsilylalkenes in aqueous tetrahydrofuran was investigated. Vinyltrimethylsilane gives only the anti-Markovnikov alcohol, 2-trimethylsilylethanol in 90% yield. Allyltrimethylsilane gives mainly allylmercuric acetate which reacts further to give a 1,3-dimercurated-2-propanol. This species reacts slowly with allyltrimethylsilane to give allylmercuric acetate. 3-Buten-1-yltrimethylsilane gives only the Markovnikov product, 1-trimethylsilyl-3-butanol in 99% yield. cis-1-Propenyl-trimethylsilane gives 1-trimethylsilyl-2-propanol in 44% yield along with cleavage products. The formation of one of these products, 2-propanol, was found by PMR to arise from the OM—DM of cis-1-propenylmercuric acetate which gives the 1,1-dimercurated-2-propanol. While the oxymercuration of cis-1-propenyl-mercuric acetate is regiospecific giving exclusive placement of the mercury α to the silicon, it is completely nonstereospecific giving equal amounts of diastereomeric adducts. The OM—DM of 2-propenyl trimethylsilane (XIX) leads only to desilylation and oxidation products. Possible reasons for the diverse behavior of these silylated alkenes are discussed.     

HYDROXYSTILBAZOLES AND HYDROXYAZAPHENANTHRENES: PHOTOCYCLIZATION AND FLUORESCENCE STUDIES

Abstract— As models for novel fluorescent probes, we have synthesized three isomeric hydroxystilbazole systems (4′-hydroxy-substituted 2-, 3-, and 4-stiIbazoles), examined their photocyclization-oxi-dation to four hydroxyazaphenanthrene systems, and made a preliminary study of their absorption and fluorescence spectra. All three stilbazoles can be prepared easily by addition of the isomeric picoline anions to 4-methoxybenzaldehyde, followed by dehydration and deprotection. Photocyclization proceeds efficiently, furnishing a single product isomer from each of the 2- and 4-stilbazole systems, and two isomeric azaphenanthrenes from the 3-stilbazole. The stilbazoles all have intense UV absorbance bands whose maxima depend upon solvent and pH; all three isomers have relatively similar spectra under neutral conditions and all three show a large red shift in base; in acid, however, the 2-and 4-stilbazole isomers show a greater red shift than the 3-stilbazole. The fluorescence of the stilbazoles is also solvent dependent, shifting to the red in more polar medium; red shifts are also observed in acid and base, but in acid, the 3-stilbazole shows a larger shift. The azaphenanthrene photocyclization products show absorbance spectra typical for quinolines and isoquinolines; their absorptivities are less than the stilbazoles, but their fluorescence is more intense. In general, the benzoquinolines have longer wavelength but weaker fluorescence than the benzoisoquinolines. Also, those isomers in which the resonance effects of the hydroxy and nitrogen groups can reinforce one another show longer wavelength emissions of greater intensity. All seven systems show dual fluorescence in water under neutral conditions, suggesting the emission from both non-ionized and ionized species in the excited state. In one case, the benzoisoquinoline system derived from 4′-hydroxy-4-stilbazole, an emission at 640 nm, observed in water over a wide pH range, is ascribed to a zwitterionic phototautomer. These stilbazoles, benzoquinolines and benzoisoquinolines may prove to be useful spectroscopic probes.     

Effects of sugar inhibition on cellulases and β-glucosidase during enzymatic hydrolysis of softwood substrates

A quantitative approach was taken to determine the inhibition effects of glucose and other sugar monomers during cellulase and β-Glucosidase hydrolysis of two types of cellulosic material: Avicel and acetic acid-pretreated softwood. The increased glucose content in the hydrolysate resulted in a dramatic increase in the degrees of inhibition on both β-Glucosidase and cellulase activities. Supplementation of mannose, xylose, and galactose during cellobiose hydrolysis did not show any inhibitory effects on β-Glucosidase activity. However, these sugars were shown to have significant inhibitory effects on cellulase activity during cellulose hydrolysis. Our study suggests that high-substrate consistency hydrolysis with supplementation of hemicellulose is likely to be a practical solution to minimizing end-product inhibition effects while producing hydrolysate with high glucose concentration.     

DNA intercalating studies of [Ru(bpy)<Subscript>2</Subscript>HPIP]<Superscript>2+</Superscript> with intramolecular hydrogen bond ligand based on introduction of copper ion

The effects of copper ion on the interaction of [Ru(bpy)₂HPIP]²⁺(bpy = 2,2′-bipyridine, HPIP = 2-(2-hydroxyphenyl) imidazo [4,5-f] [1, 10] phenanthroline) with DNA have been investigated by electronic absorption spectroscopy and fluorescence spectroscopy. HPIP ligand of the complex with an intramolecular hydrogen bond can bind Cu²⁺ in the absence of DNA, as revealed by the absorbance and fluorescence decrease for [Ru(bpy)₂HPIP]²⁺. The resultant heterometallic complex binds to DNA via intercalation of HPIP into the DNA base pairs and its DNA-binding ability is stronger than [Ru(bpy)₂HPIP]²⁺ itself. The DNA bound [Ru(bpy)₂HPIP]²⁺ cannot bind Cu²⁺ at low Cu²⁺ concentration and the intramolecular hydrogen bond in HPIP is located inside the DNA helix. While the Cu²⁺ concentration is relative high, Cu²⁺ can quench the fluorescence of DNA bound [Ru(bpy)₂HPIP]²⁺. The quenching reason is proposed.