Chaos suppression through asymmetric coupling

We study pairs of identical coupled chaotic oscillators. In particular, we have used Roessler (in the funnel and no funnel regimes), Lorenz, and four-dimensional chaotic Lotka-Volterra models. In all four of these cases, a pair of identical oscillators is asymmetrically coupled. The main result of the numerical simulations is that in all cases, specific values of coupling strength and asymmetry exist that render the two oscillators periodic and synchronized. The values of the coupling strength for which this phenomenon occurs is well below the previously known value for complete synchronization. We have found that this behavior exists for all the chaotic oscillators that we have used in the analysis. We postulate that this behavior is presumably generic to all chaotic oscillators. In order to complete the study, we have tested the robustness of this phenomenon of chaos suppression versus the addition of some Gaussian noise. We found that chaos suppression is robust for the addition of finite noise level. Finally, we propose some extension to this research.     

High-resolution laser spectroscopy on the S1<--S0 transition of jet-cooled anthracene: rotational structure and Stark effect

We present rotationally resolved spectra of the S(1)<--S(0) transition of anthracene at 27,687.153(4) cm(-1) as well as Stark effect measurements of the free anthracene molecule in electric fields of up to 85 kV/cm. The molecule is rotationally cooled in a supersonic jet expansion to a temperature of 4 K. The rotational constants of the electronic states S(0) and S(1) are determined by a simplex fit comparing the experimental spectra with simulations for an asymmetric rigid rotor. The measured and simulated energies are in very good agreement and the estimated accuracy of the rotational constants is 1 per thousand. Furthermore, the polarizabilities of the electronic states S(0) and S(1) are investigated. At an electric field of 85 kV/cm, line shifts of up to 150 MHz caused by a change in the polarizability of Deltaalpha=123(7) a.u. and broadenings due to the anisotropy are observed. The components of the tensor polarizabilities of the electronic states S(0) and S(1) are determined by simulating the complete spectra using second-order perturbation theory.     

Nature of smectic A*-C* phase transitions in a series of ferroelectric liquid crystals with little smectic layer shrinkage

The smectic layer spacing of two homologous series of ferroelectric liquid crystal compounds was characterized by small-angle x-ray diffraction and different degrees of smectic layer shrinkage on cooling from the SmA* into the SmC* phase were observed. The smectic A*-smectic C* phase transition was further studied by measuring the thermal and electric field effects on the optical tilt angle and the electric polarization. With decreasing length of the alkyl terminal chain the phase transition changes from tricritical exhibiting high layer shrinkage to a pure second-order transition with almost no layer shrinkage. This is explained by the increased one-dimensional translational order of the smectic layers, which seems to promote the "de Vries"-type [Mol. Cryst. Liq. Cryst. 41, 27 (1977)] smectic A*-C* phase transition with no or little layer shrinkage.     

Use of helium nanodroplets for assembly, transport, and surface deposition of large molecular and atomic clusters

The utility of continuous beam of helium droplets for assembly, transport, and surface deposition of metal and molecular clusters is studied. Clusters of propyne having from about 10 to 10(4) molecules were obtained via sequential pickup of molecules by He droplets with average sizes in the range of 10(4)-10(7) atoms. The maximum attainable flux of the propyne molecules carried by He droplets was found to be in the range of (5-15)x10(15) molecules sr(-1) s(-1), being larger in larger droplets. The size of the clusters and the flux of the transported species are ultimately limited by the evaporative extinction of the entire helium droplet upon capture of particles. It is shown that the attenuation of the He droplet beam in the process of the cluster growth can be used in order to obtain the average size and the binding energy of the clusters. Furthermore, we used He droplets for assembling and surface deposition of gold and silver clusters having about 500 atoms. Typical deposition rate of metal atoms of about 3 x 10(15) atoms sr(-1) s(-1) is comparable to or larger than obtained with other beam deposition techniques. We propose that doping of He droplets by Au and Ag atoms in two separate pickup chambers leads to formation of the bimetal clusters having core-shell structure.     

Determination of nitrate esters in water samples Comparison of efficiency of solid-phase extraction and solid-phase microextraction

This paper deals with comparison of efficiency of extraction techniques (solid-phase extraction, SPE and solid-phase microextraction, SPME) used for extraction of nitrate esters (ethyleneglycoldinitrate, EGDN and nitroglycerin, NG), representing the first step of the method of quantitative determination of trace concentrations of nitrate esters in water samples. EGDN and NG are subsequently determined by means of high-performance liquid chromatography with ultraviolet detection (HPLC-UV). Optimization of SPE and SPME conditions was carried out using model water samples. Seven SPE cartridges were tested and the conditions were optimized (type of sorbent, type and volume of solvent to be used as eluent). For both nitrate esters the limit of detection (LOD) and the limit of quantification (LOQ) obtained using SPE/HPLC-UV were 0.23 microg mL(-1) and 0.70 microg mL(-1), respectively. Optimization of SPME conditions: type of SPME fibre (four fibres were tested), type and time of sorption/desorption, temperature of sorption. PDMS/DVB (polydimethylsiloxane/divinylbenzene) fibre coating proved to be suitable for extraction of EGDN and NG. For this fibre the LOD and the LOQ for both nitrate esters were 0.16 microg mL(-1) and 0.50 microg mL(-1), respectively. Optimized methods SPE/HPLC-UV and SPME/HPLC-UV were then used for quantitative determination of nitrate esters content in real water samples from the production of EGDN and NG.     

Proton-abstraction mechanism in the palladium-catalyzed intramolecular arylation: substituent effects

The regioselectivity observed in the intramolecular palladium-catalyzed arylation of substituted bromobenzyldiarylmethanes as well as theoretical results demonstrate that the Pd-catalyzed arylation proceeds by a mechanism involving a proton abstraction by the carbonate, or a related basic ligand. The reaction is facilitated by electron-withdrawing substituents on the aromatic ring, which is inconsistent with an electrophilic aromatic-substitution mechanism. The more important directing effect is exerted by electron-withdrawing substituents ortho to the reacting site.     

High fidelity functional patterns of an extracellular matrix protein by electron beam-based inactivation

Controlling the organization of proteins on surfaces provides a powerful biochemical tool for determining how cells interpret the spatial distribution of local signaling molecules. Here, we describe a general high fidelity approach based on electron beam writing to pattern the functional properties of protein-coated surfaces at length scales ranging from tens of nanometers to millimeters. A silicon substrate is first coated with the extracellular matrix protein fibronectin, which is then locally inactivated by exposure to a highly focused electron beam. Biochemical inactivation of the protein is established by the loss of antibody binding to the fibronectin. Functional inactivation is determined by the inability of cells to spread or form focal adhesions on the inactivated substrate, resulting in cell shapes constrained to the pattern, while they do both (and are unconstrained) on the remaining fibronectin. These protein patterns have very high fidelity, and typical patterns agree with the input dimensions of the pattern to within 2%. Further, the feature edges are well defined and approach molecular dimensions in roughness. Inactivation is shown to be dose dependent with observable suppression of the specific binding at 2 microC cm(-2) and complete removal of biochemical activity at approximately 50 microC cm(-2) for 5 keV electrons. The critical dose for inactivation also depends on accelerating voltage, and complete loss of antibody binding was achieved at approximately 4-7 microC cm(-2) for 1 keV electrons, which corresponds to approximately 50-90 electrons per cross-sectional area of a whole fibronectin dimer and ~2-4 electrons per type III fibronectin domain. AFM analysis of the pattern surfaces revealed that electron beam exposure does not remove appreciable amounts of material from the surface, suggesting that the patterning mechanism involves local inactivation rather than the ablation that has been observed in several organic thin film systems.     

Investigating carbazole jacketed precursor dendrimers: sonochemical synthesis, characterization, and electrochemical crosslinking properties

Precursor carbazole terminated dendrons and dendrimers up to generation four (G4-D) were synthesized using a convergent approach. Sonication as a means of facilitating organic reactions in dendrimer chemistry was explored resulting in very facile and very fast (up to 50x) reaction times compared to those using traditional reflux conditions. The limits of peripheral group functionality were explored as a function of generation. The electrochemical cross-linking of the dendrimers as thin films revealed unusual cyclic voltammetry (CV) behavior depending upon the generations, which were significantly different from their linear counterpart, Poly(N-vinylcarbazole) (PVK). G1-D showed a higher extent of intermolecular cross-linking while G4-D showed a higher extent of intramolecular cross-linking. The formed films were optically clear and possess superior energy band gap properties making them an alternative candidate over PVK for future hole-transport layer materials in electro-optical devices.     

Characterization of substituted polyacetylene microstructure by pyrolysis gas chromatography

A series of substituted acetylenes has been polymerized with WOC14/Ph4Sn metathesis catalyst and [Rh(cod)OMe]2 insertion catalyst, and the thermal degradation of the polyacetylenes prepared has been studied using pyrolysis capillary gas chromatography (Py-GC) with flame ionization and mass spectrometric detection to obtain information on the effect of the catalyst on the head-tail (H-T) isomerism of polyacetylenes (poly(phenylacetylene), poly[(4-methylphenyl)acetylene], poly(benzylacetylene), poly((2-fluorophenyl)acetylene], poly[(3-fluorophenyl)acetylene], and poly[(4-fluoro-phenyl)acetylenel). Cyclotrimers have been found to be the main pyrolysis products in all cases. Direct Py-MS connection was used to determine the temperature profiles of the released pyrolysis products. 1,3,5-Trisubstituted benzenes were found to be the predominant pyrolysis products of the polymers prepared with the insertion catalyst, which proves the presence of long head-to-tail sequences of monomeric units in these polyacetylenes. On the other hand, both 1,2,4- and 1,3,5-trisubstituted benzenes are present in significant amounts in the pyrolysis products of polymers prepared with the metathesis catalyst, which proves the presence of a significant content of the head-to-head (HH) and tail-to-tail (TT) linkages in these isomers of polyacetylenes. Contents of the regular (HT) and inverse (HH-TT) monomer linkages (RML and IML, respectively) in polymer chains were determined from the relative amounts of di-, tri-, and tetrasubstituted benzenes found in the Py-GC products.