Routine determination of major anions in atmospheric aerosols by capillary electrophoresis

Capillary electrophoresis (CE) with indirect UV detection utilizing a pyromellitate-based electrolyte was used for the routine analysis of major anions in atmospheric aerosols collected on filters with high-volume (Hi-Vol) samplers. The long-term reliability of the CE system was checked over an 8-month period during which over 2900 samples were analyzed. In addition, approximately 1100 samples were analyzed in parallel by ion chromatography (IC). It has been shown that acceptable analytical performance can be routinely obtained. The agreement between the CE and IC results is good, generally better than 20% at concentrations larger than 1 mg l⁻¹.     

Low Reynolds Number Interactions between Colloidal Particles near the Entrance to a Cylindrical Pore

The interaction between stable colloidal particles arriving at a pore entrance was studied using a numerical method for the case where the particle size is smaller than but of the same order as the pore size. The numerical method was adapted from a front-tracking technique developed for studying incompressible, multifluid flow by S. O. Unverdi and G. Tryggvason (J. Comp. Phys. 100, 25, 1992). The method is based on the finite difference solution of Navier-Stokes equation on a stationary, structured, Cartesian grid and the explicit representation of the particle-liquid interface using an unstructured grid that moves through the stationary grid. The simulations are in two dimensions, considering both deformable and nondeformable particles, and include interparticle colloidal interactions. The interparticle and particle-pore hydrodynamic interactions, which are very difficult to determine using existing analytical and semi-numerical, semi-analytical techniques in microhydrodynamics, are naturally accounted for in our numerical method and need not be explicity determined. Two- and three-particle motion toward a pore has been considered in our simulations. The simulations demonstrate how the competition between hydrodynamic forces and colloidal forces acting on particles dictate their flow behavior near the pore entrance. The predicted dependence of the particle flow behavior on the flow velocity and the ratio of pore size to particle size are qualitatively consistent with the experimental observations of V. Ramachandran and H. S. Fogler (J. Fluid Mech. 385, 129, 1999). Copyright 2000 Academic Press.     

Mechanisms of antioxidant action: Stabilisation of nitrile rubber by interpenetrating networks based on thiol adducts

Nitrile rubbers containing three thiol antioxidants ((I) to (III)) in bound form have been evaluated as masterbatch concentrates by dilution in unstabilised nitrile rubber both at the latex stage and in the polymer melt. Both procedures give effective substantive systems in the case of the hindered phenol (I) and the aromatic thiol amide (II). Both show a high level of antioxidant retention under very severe technological conditions (oil/air oven cyclical test at 150°C). Antioxidant (III), which has only a minor structural difference from (II), is very much less effective as a substantive antioxidant.     

Optical rotatory dispersion studies—CIV Low-temperature circular dichroism behavior of various chromophoric derivatives of alcohols and amines

The low-temperature circular dichroism behavior of various cyclic and alicyclic systems containing the methyl xanthato-, N,N-diethyl-N′-acylthioureyl-, N-phthalimido-, nitrito- and dithio-carbalkoxy- chromophores is discussed. Rotational strength (R₀^T) values are reported where possible and changes in this parameter upon variation of the temperature are interpreted, where relevant, in terms of the degree of steric inhibition to free rotation about the various bonds connected to the asymmetric center bearing (or nearest to) the chromophore moiety.     

Enhancement of phosphoprotein analysis using a fluorescent affinity tag and mass spectrometry

A fluorescent affinity tag (FAT) was synthesized and was utilized to selectively modify phosphorylated serine and threonine residues via beta-elimination and Michael addition chemistries in a 'one-step' reaction. This labeling technique was used for covalent modification of both phosphoproteins and phosphopeptides, allowing identification of these molecular species by fluorescence imaging after solution- or gel-based separation methods. In addition to the strong fluorescence of the rhodamine tag, a commercially available antibody can be used to enrich low-abundance post-labeled phosphopeptides present in complex mixtures. Application of this methodology to phosphorylation-site mapping has been evaluated for a phosphoprotein standard, bovine beta-casein. Initial results demonstrated low femtomole detection limits after fluorescence image analysis of FAT-labeled proteins or peptides.     

Computer-aided multichannel detection in high-performance liquid chromatography

Summary The development of a computer-aided rapid-scanning detector for HPLC based on the linear photodiode array UV-visible spectrophotometer is described. Chomatograms monitored at up to three wavelengths, with automatic capture of spectra for eluted peaks and post-run processing of spectral data to generate log₁₀ (A) spectra, second derivative and fourth derivative spectra, are described. Methods are reported for the analysis of forensic samples of diacetylmorphine (heroin) in the presence of the degradation products and potential contaminants caffeine, papaverine, 6-acetylcodeine, thebaine, 6-acetyl-morphine, procaine and morphine separated by HPLC. The novel use of second and higher derivative spectra for the qualitative characterisation of drugs and contaminants separated by HPLC is described.Presented at the 14th International Symposium on Chromatography London, September, 1982     

205Tl NMR methods for the characterization of monovalent cation binding to nucleic acids

Monovalent cations play an important role in many biological functions. The guanine rich sequence, d(G4T4G4), requires monovalent cations for formation of the G-quadruplex, d(G4T4G4)2. This requirement can be satisfied by thallium (Tl+), a potassium (K+) surrogate. To verify that the structure of d(G4T4G4)2 in the presence of Tl+ is similar to the K+-form of the G-quadruplex, the solution structure of the Tl+-form of d(G4T4G4)2 was determined. The 10 lowest energy structures have an all atom RMSD of 0.76 +/- 0.16 A. Comparison of this structure to the identical G-quadruplex formed in the presence of K+ validates the isomorphous nature of Tl+ and K+. Using a 1H-205Tl spin-echo difference experiment we show that, in the Tl+-form of d(G4T4G4)2, small scalar couplings (<1 Hz) exist between 205Tl and protons in the G-quadruplex. These data comprise the first 1H-205Tl scalar couplings observed in a biological system and have the potential to provide important constraints for structure determination. These experiments can be applied to any system in which the substituted Tl+ cations are in slow exchange with the bulk ions in solution.     

Covalent attachment of a nickel nitrilotriacetic acid group to a germanium attenuated total reflectance element

The surface of a germanium internal reflectance element (IRE) was modified to bind 6X-histidine (his)-tagged biomolecules. The step-by-step surface modification was monitored via single-pass attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FT-IR). Initially an adlayer of 7-octenyltrimethoxysilane (7-OTMS) was formed on the Ge crystal through the surface hydroxyl groups, which were produced via ozonolysis of the Ge surface. The vinyl moiety of 7-OTMS was oxidized to a carboxylic acid, which was activated by 1,1'-carbonydiimidazole (CDI) to produce a labile imidazole. The labile imidazole that resulted from the CDI coupling was then displaced by the primary amine of nitrilotriacetic acid (NTA). Nickel sulfate was added to the system, and it coordinated with the three carbonyl groups and the nitrogen on NTA, thus leaving the ability of Ni to coordinate with two adjacent histidine residues. Binding of his-tagged biotin to nickel nitrilotriacetic acid (Ni-NTA) was observed by ATR-FT-IR spectroscopy. The surface modification method presented in this paper had minimal nonspecific binding, the Ni-NTA surface was reusable if stored properly, and complete removal of the organic surface was achievable.     

Enantioselective aziridination using copper complexes of biaryl Schiff bases

Racemic 2,2'-diamino-6,6'-dimethylbiphenyl is resolved using simulated moving bed chromatography, and the absolute configuration of the enantiomers is confirmed via the X-ray crystal structure of a derivative. The diamine is condensed with a range of aldehydes to give bidentate aldimine proligands L. Molecular structures of the complexes formed between L and Cu(I) fall into two classes; bimetallic double helices ([Cu(2)L(2)](2+)) and monometallic ([CuL](+)). The latter are strikingly more efficient in the aziridination of alkenes than are the former in terms of rate, turnover, and enantioselection. In particular, the imine ligand formed from the diamine and 2,6-dichlorobenzaldehyde gives, in combination with Cu(I) or Cu(II), up to 99% ee in the aziridination of 6-acyl-2,2-dimethylchromene and 88-98% ee for a range of cinnamate esters. Styrenic and other alkenes are converted with lower selectivities (5-54%). The catalytic system shows a linear response in product ee to catalyst ee, and the product ee does not vary significantly during the reaction. UV spectrophotometric investigations indicate that conversion of Cu(I) to Cu(II) is not essential for catalysis but that Cu(II) is probably also a competent system.     

A genetic algorithm for structure-based de novo design

Genetic algorithms have properties which make them attractive in de novo drug design. Like other de novo design programs, genetic algorithms require a method to reduce the enormous search space of possible compounds. Most often this is done using information from known ligands. We have developed the ADAPT program, a genetic algorithm which uses molecular interactions evaluated with docking calculations as a fitness function to reduce the search space. ADAPT does not require information about known ligands. The program takes an initial set of compounds and iteratively builds new compounds based on the fitness scores of the previous set of compounds. We describe the particulars of the ADAPT algorithm and its application to three well-studied target systems. We also show that the strategies of enhanced local sampling and re-introducing diversity to the compound population during the design cycle provide better results than conventional genetic algorithm protocols.