High-throughput screening of pKa values of pharmaceuticals by pressure-assisted capillary electrophoresis and mass spectrometry

A high-throughput pKa screening method based on pressure-assisted capillary electrophoresis (CE) and mass spectrometry (MS) is presented. Effects of buffer type and ionic strength on sensitivity and pKa values were investigated. Influence of dimethyl sulfoxide (DMSO) concentration present in the sample on effective mobility measurement was examined. A series of ten volatile buffers, covering a pH range from 2.5 to 10.5 with the same ionic strength, was employed. The application of volatile background electrolytes resulted in significant signal increase as compared with commonly used non-volatile phosphate buffers. In general, the CE/MS system provided a ten-fold higher sensitivity than conventional UV detection. The newly developed CE/MS method offers high-throughput capacity by pooling a number of compounds into a single sample. Simultaneous measurement of more than 50 compounds was readily achieved in less than 150 min. The measured pKa values are consistent with the published data obtained from the CE/UV method and are also in good agreement with data generated by other methods. Other advantages of using CE/MS for pKa screening are illustrated with typical examples, including poorly soluble compounds and non-UV-absorbing compounds.     

Degenerative transfer living Ziegler-Natta polymerization: application to the synthesis of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length

The neutral dimethyl pentamethylcyclopentadienylzirconium acetamidinate, (eta(5)-C(5)Me(5))ZrMe(2)[N(t-Bu)C(Me)N(Et)], can serve as a highly active initiator for the living Ziegler-Natta polymerization of alpha-olefins to produce polyolefins of narrow polydispersity (D < or = 1.05) when "activated" through mono demethylation by a substoichiometric amount of the borate, [PhNMe(2)H][B(C(6)F(5))(4)]. The mechanism by which this living polymerization proceeds is through a process of degenerative transfer involving rapid and reversible methyl group exchange between cationic (active) zirconium propagating centers and neutral (dormant) methyl, polymeryl zirconium end groups. Facile metal-centered epimerization of the dormant species is responsible for a loss of stereocontrol during propagation that produces iso-rich material in contrast to the pure isotactic polymer microstructure obtained when degenerative transfer is not present. By turning degenerative transfer "on" and "off" between successive monomer polymerizations, a successful strategy for the production of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length has been demonstrated.     

Channel flow cell studies on the evaluation of surface pretreatments using phosphoric acid or polymaleic acid for calcite stone protection

The dissolution kinetics of surface-pretreated and weathered calcite was investigated in dilute acid using a channel flow cell with microdisk detection. Two pretreatments were studied, polymaleic acid and phosphoric acid. Treatment with polymaleic acid was shown to significantly passivate calcite but to a lesser extent than the phosphoric acid and the former coating was found to be less effective for protection of calcite from acid attack. However, treatment of calcite with phosphoric acid resulted in the passivation of calcite from acid attack which strongly inhibited dissolution, an effect that was enhanced even further after exposure to the environment.     

Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).     

Gas‐phase functionalized carbon‐carbon coupling reactions catalyzed by Ni (II) complexes

Gas‐phase C―C coupling reactions mediated by Ni (II) complexes were studied using a linear quadrupole ion trap mass spectrometer. Ternary nickel cationic carboxylate complexes, [(phen)Ni (OOCR¹)]⁺ (where phen = 1,10‐phenanthroline), were formed by electrospray ionization. Upon collision‐induced dissociation (CID), they extrude CO₂ forming the organometallic cation [(phen)Ni(R¹)]⁺, which undergoes gas‐phase ion‐molecule reactions (IMR) with acetate esters CH₃COOR² to yield the acetate complex [(phen)Ni (OOCCH₃)]⁺ and a C―C coupling product R¹‐R². These Ni(II)/phenanthroline‐mediated coupling reactions can be performed with a variety of carbon substituents R¹ and R² (sp³, sp², or aromatic), some of them functionalized. Reaction rates do not seem to be strongly dependent on the nature of the substituents, as sp³‐sp³ or sp²‐sp² coupling reactions proceed rapidly. Experimental results are supported by density functional theory calculations, which provide insights into the energetics associated with the C―C bond coupling step.     

A Self-Assembled Cage with Endohedral Acid Groups both Catalyzes Substitution Reactions and Controls Their Molecularity

A self-assembled Fe₄L₆ cage complex internally decorated with acid functions is capable of accelerating the thioetherification of activated alcohols, ethers and amines by up to 1000-fold. No product inhibition is seen, and effective supramolecular catalysis can occur with as little as 5 % cage. The substrates are bound in the host with up to micromolar affinities, whereas the products show binding that is an order of magnitude weaker. Most importantly, the cage host alters the molecularity of the reaction: whereas the reaction catalyzed by simple acids is a unimolecular, S_N1-type substitution process, the rate of the host-mediated process is dependent on the concentration of nucleophile. The molecularity of the cage-catalyzed reaction is substrate-dependent, and can be up to bimolecular. In addition, the catalysis can be prevented by a large excess of nucleophile, where substrate inhibition dominates, and the use of tritylated anilines as substrates causes a negative feedback loop, whereby the liberated product destroys the catalyst and stops the reaction.     

Benzyl Borane NHC Adducts: Beyond B−C Bond Scission

Benzyl-substituted boronates and borates are widely employed as mild sources in radical or anionic transfer reactions of benzyl entities. In this process the B−C bond to the benzyl moiety is essentially ruptured. In contrast, reactions with retention of the B−C bond are poorly investigated although several other reactive sites in benzyl–boron systems are clearly inherent. In this respect, the novel reactivity of the representative borane adduct IiPr−BH₂Bn [IiPr=:C{N(iPr)CH}₂, Bn=CH₂C₆H₅] is demonstrated. Dihalogenation of the BH₂ entity is observed with BCl₃ and BBr₃, whereas BI₃ either affords IiPr−BHI₂ or proceeds with borylation of the aromatic phenyl ring to give a hydride-bridged bisborylated species. The photochemical mono- and dihalogenation of the benzylic CH₂ group was demonstrated with elemental bromine Br₂. The brominated product IiPr−BBr₂−CHBr−C₆H₅ was borylated at the benzylic carbon atom in an umpolung event with BI₃ to afford the zwitterion IiPr−BI−CH(BI₃)−C₆H₅.     

Rate and Computational Studies for Pd-NHC-Catalyzed Amination with Primary Alkylamines and Secondary Anilines: Rationalizing Selectivity for Monoarylation versus Diarylation with NHC Ligands

The relative rates of arylation of primary alkylamines with different Pd-NHC catalysts have been measured, as have the relative rates of arylation of the secondary aniline product in an attempt to understand the key ligand design features necessary to have high selectivity for the monoarylated amine product. As the substituents on the N-aryl ring of the NHC increase in size, selectivity for monoarylation increases and this is further enhanced by chlorinating the back of the NHC ring. Computations have been performed on the catalytic cycle of this transformation in order to understand the selectivity obtained with the different catalysts.     

Tuning the phase behavior of semicrystalline hydrogenated polynorbornene via epimerization

Hydrogenated polynorbornene (hPN) synthesized by ring‐opening metathesis polymerization (ROMP) exhibits a thermoreversible change in crystal polymorph at a temperature T _cc below its melting point, T _m. The polymorphic transition corresponds to a sharp increase in rotational disorder around the chain axis as the temperature is increased above T _cc. Saturation of ROMP polynorbornene (PN) to hPN can be achieved through both catalytic and noncatalytic approaches. Here, three different hydrogenation routes were employed on the same precursor polymer: catalytic routes over either supported Pd⁰ or a Ni/Al complex, and noncatalytic saturation with diimide. The different hydrogenation routes result in hPNs with varying degrees of epimerization of the cyclopentylene ring (from cis to trans); these epimerized units are included in the hPN crystals. The crystal structure of the rotationally ordered hPN polymorph, observed below T _cc, changes sharply at low levels of epimerization and then is weakly influenced by further increases in trans content. The stability of the rotationally ordered hPN polymorph decreases with increasing epimerization, as reflected in a reduction of T _cc from 134 °C to 92 °C at 22% epimerization. T _cc is less affected by epimerization than by the inclusion of a similar content of 5‐methylnorbornene units, reflecting the smaller size of the trans defect. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1188–1195     

Synthesis and crystallization behavior of rigid copolyesters with biphenyl‐4,4′‐dicarboxylate and 2,6‐naphthalenedicarboxylate in the main chain

Structurally rigid copolyester thermoplastics were synthesized from 1,4‐cyclohexanedimethanol and the diesters dimethyl biphenyl‐4,4′‐dicarboxylate and dimethyl 2,6‐naphthalenedicarboxylate (DMN) via conventional melt transesterification. Conventional differential scanning calorimetry (CDSC) showed all compositions to exhibit multiple endotherms upon heating. Wide‐angle X‐ray diffraction analysis showed copolyester compositions to exhibit the crystalline structure of either the homopolyester Poly(1,4‐cyclohexylenedimethylene 2,6‐naphthalate) (PCN) or the homopolyester Poly(1,4‐cyclohexylenedimethylene 4,4′‐bibenzoate) (PCB), but not both simultaneously. Further thermal analysis using CDSC and fast DSC investigated the origin of the multiple endotherm behavior. While three endotherms are observed for low heating rates, the upper two endotherms appear to merge at heating rates about 1–5 °C s^?1 and a single endotherm remains above heating rates about 10–50 °C s^?1. While the behavior of the upper two endotherms is undeniably consistent with the mechanism of melting–recrystallization–remelting (MRR), we suggest that the low endotherm is likely associated with the melting of constrained secondary crystals, although MRR effects cannot be ruled out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 973–980