A combination atmospheric pressure LC/MS:GC/MS ion source: Advantages of dual AP-LC/MS:GC/MS instrumentation

Modification of commercial LC/MS instrumentation to allow both atmospheric pressure (AP) LC/MS and GC/MS is described. Advantages of this additional capability versus LC/MS alone include higher chromatographic resolution in the GC versus LC mode, greater peak capacity for complex mixture analysis, higher sensitivity for a variety of volatile compounds, and the ability to observe compounds of low polarity that are not readily observed in LC/MS. Advantages over conventional GC/MS include the ability to use higher carrier gas flow and shorter columns for passing less volatile materials through the gas chromatograph, selective ionization, and rapid switching between positive and negative ion modes. Other advantages include application of the enhanced capabilities of LC/MS instrumentation to GC/MS analyses such as cone voltage fragmentation, MS(n), high mass resolution, and accurate mass measurement. Limitations of APGC/MS include the inability to observe saturated hydrocarbon and certain other highly nonpolar compounds and less odd-electron fragmentation for computer aided library searching. For some analyses, the limitation related to ionization of highly nonpolar compounds is advantageous, as is the simplified mass spectrum and easy molecular weight identification that results from less fragmentation observed in the AP ionization mode.     

Synthetic studies related to diketopyrrolopyrrole (DPP) pigments. Part 2: The use of esters in place of nitriles in standard DPP syntheses: Claisen-type acylations and furopyrrole intermediates

Ethyl 2-aryl-4,5-dihydro-5-oxopyrrole-3-carboxylates react with esters or acyl halides in the presence of a strong base to give 4-acyl derivatives, which exist predominantly as either E- or Z-enols. These are cyclised, either in solution at temperatures >200 °C or by microwave irradiation, to 3,6-disubstituted 1H-furo[3,4-c]pyrrolediones which, after N-protection, are convertible by reaction with primary amines into novel N,N′-disubstituted DPP derivatives.     

Diamond paste-based electrodes for determination of Cr(III) in pharmaceutical compounds

A new class of monocrystalline diamond paste-based electrodes is proposed for the determination of chromium(III) at trace levels in vitamins. Three types of monocrystalline diamond—natural diamond 1 (natural diamond), synthetic diamond 50 (synthetic-1), and synthetic diamond 1 (synthetic-2)—were used for electrode construction. The linear concentration ranges are between 10^–10 and 10^–8; 10^–9 and 10^–7, and 10^–10 to 10^–8 mol L^–1, with limits of detection of 10^–12, 10^–12, and 10^–11 mol L^–1, when natural diamond, synthetic-1, and synthetic-2, respectively, are used as electrode materials. For electrodes based on natural diamond and synthetic-1 it was found that Cr(III) yields a peak at about +0.275±0.015 V (vs. Ag/AgCl) within a predetermined positive potential range situated between +0.4 and +0.2 V, while for the electrode based on synthetic-2 the peaks are found at +0.300±0.015 V (vs. Ag/AgCl). The proposed method is reliable for the determination of chromium(III) at trace levels in two vitamin tablets (RSD<0.2%).     

The photolysis of platinacycloalkanes in solution

The photolysis of [I₂$\text{PtCH}{}_2\text{CH}{}_2\text{CH}{}_2\text{C}$H₂ (PMe₂ Ph)₂] gives ethylene and but-1-ene as volatile products, the latter probably being formed via a five-coordinate platinum intermediate. However, the formation of propene from the photolysis of [Cl₂$\text{PtCH}{}_2\text{CH}{}_2\text{C}$H₂ (1,10-phenanthroline) appears to involve a direct transfer of a hydrogen atom between neighbouring CH₂ groups in the ring. Other gaseous products, e.g. cyclopropane, ethylene, may be formed via a platinum ion radical.     

An investigation of the triplet state dynamics of zinc chlorophyll b by microwave-induced changes in the intensity of fluorescence and singlet-singlet absorption

Optical detection of magnetic resonance experiments on the triplet state of zinc-substitution chlorophyll b has provided the zero-field splitting and depopulation rate constants for the individual triplet spin sublevels. The zero field triplet state EPR transitions could be observed at 890 MHz and 1085 MHz as either microwave-induced changes in the fluorescence intensity or in the intensity of S₀ → S_n absorption. The dynamics experiments show that intersystem crossing from the Zn chlorophyll b triplet state into the ground state occurs primarily through the out-of-plane (lowest energy) spin sublevel.     

Determination of fluoride by analate additions potentiometry

Summary A novel direct potentiometric technique called analate additions potentiometry has been applied to the determination of fluoride using a fluoride ion selective indicator electrode. As expected, the analytical results are comparable to those obtained by the standard additions technique. An error of less than 1 part in 1000 and a precision of about 0.5% was achieved. The technique should be most useful in the determination of small sample volumes which cannot be done by the standard additions method without prior dilution.

---

Zusammenfassung Ein neues, direktes potentiometrisches Verfahren wurde für die Fluoridbestimmung angewendet, wobei eine für Fluoridionen selektive Indikatorelektrode verwendet wurde. Wie erwartet sind die Ergebnisse dieses Probenzusatzverfahrens mit denen der Standardzusatzmethode vergleichbar. Der Fehler ist kleiner als l, die Genauigkeit beträgt etwa 0,5%. Das angegebene Verfahren eignet sich vor allem zur Analyse kleiner Probevolumina, die ohne vorherige Verdünnung mit der Standardzusatzmethode nicht analysiert werden können.

     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Regiospecific synthesis of mono- and bicyclic 6-alkoxy-2-pyrones and their use in the preparation of substituted aromatics,anthraquinones, and tetracyclic intermediates for 11-deoxyanthracycline synthesis

Several mono- and bicyclic 6-methoxy-2-pyrones having substituents at C4 and C5 can be prepared regiospecifically by either of two routes: (1) regiospecific construction of a glutaconic half-ester followed by dehydrative cyclization, and (2)regiospecific Friedel-Crafts acylation of 6-methoxy-2-pyrones at C5. These pyrones undergo clean and regiospecific Diels-Alder cycloadditions with various unsymmetrical dienophiles, e.g., quinones, unsaturated esters, etc, with subsequent loss of carbon dioxide. In this manner several polycyclic aromatic natural products have been prepared such as chrysophanol, helminthosporin, pachybasin, 2-acetylemodin and the purported structure for orientalone. The utility of this approach for the synthesis of the anthracyclines is demonstrated by its use in the preparation of various tetracyclic intermediates for anthracycline synthesis.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.