Volumes of activation for dissociation of pentacyanoferrates(II) through pressure and salt effects on reactivity

Summary Dependences of rate constants on pressure (up to 1 kbar) and on added salt concentration (up to 6.0 mol dm^–3 LiNO₃, NaNO₃, NaCl, Na₂SO₄ or KNO₃) have been established for dissociative substitution of pentacyanoferrates(II), [Fe(CN)₅L]^3– with L = 4-cyanopyridine, 4,4-bipyridyl, 4-phenylpyridine and 4-t-butylpyridine. Activation volumes derived directly from pressure effects, and indirectly from salt effects via surface tension dependences and derived surfaces of activation, are reported, compared and discussed.     

Synthesis of fluoren-9-ones by the palladium-catalyzed cyclocarbonylation of o-halobiaryls

The synthesis of various substituted fluoren-9-ones has been accomplished by the palladium-catalyzed cyclocarbonylation of o-halobiaryls. The cyclocarbonylation of 4'-substituted 2-iodobiphenyls produces very high yields of 2-substituted fluoren-9-ones bearing either electron-donating or electron-withdrawing substituents. 3'-Substituted 2-iodobiphenyls afford 3-substituted fluoren-9-ones in excellent yields with good regioselectivity. This chemistry has been successfully extended to polycyclic fluorenones and fluorenones containing fused isoquinoline, indole, pyrrole, thiophene, benzothiophene, and benzofuran rings.     

Joint QTAIM and Hirshfeld study of the sigma and pi charge distribution and electron delocalization in carbonyl compounds: a comparative study with the resonance model

Atomic charges and delocalization indexes (DIs) for a series of carbonyl compounds comprising dimethyl ketone, acetaldehyde, acetic acid, methyl acetate, acetamide, methyl vinyl ketone, divinyl ketone, and benzoic acid were studied using two different atomic partitionings: the QTAIM and the Hirshfeld (stockholder) scheme. The resonance model, traditionally employed to explain the reactivity of these compounds, is not in line with the total atomic charges and DIs calculated by both methodologies. However, the resonance model is supported to some extent by the pi charges and pi DIs calculated by both schemes, but the calculated values indicate that the pi population delocalizes only to a small degree. Although the absolute values of QTAIM and stockholder atomic charges are significantly different, the pi charges and the values of the DIs show similar trends for all the atoms and molecules of this study; this is especially the case for the pi DIs. A study of the electron density on the level of a single MO performed for CO, H2CO, F2CO, and H2CS reveals that the differences in the atomic sigma charges computed with both partitionings can be traced back to their different treatment of interatomic regions.     

Mixed micelles formed by n-octyl-beta-D-glucopyranoside and tetradecyltrimethylammonium bromide in aqueous media

Speed of sound, density, conductivity, and fluorescence spectroscopy experiments were run to analyze the mixed aggregation process of a nonionic-cationic surfactant system in aqueous media at 298.15 K. The mixed system comprises a nonionic surfactant, n-octyl-beta-D-glucopyranoside (OBG), and a cationic surfactant, tetradecyltrimethylammonium bromide (C14TAB), with 8 and 14 carbon atoms on the hydrophobic tails, respectively. From these data, the total and partial critical micellar concentrations, the total and partial aggregation numbers, apparent molar volumes and isentropic compressibilities, hydration numbers, and the corresponding changes in the latest properties due to the mixed aggregation process were determined. Pure and mixed micelles were analyzed from a geometrical point of view by determining the packing parameter of the aggregates. Furthermore, the experimental characterization of both the monomeric and micellar phases was completed with a theoretical study of the mixed micellization phenomena studied herein, by means of some of the most relevant theoretical models.     

Determination of rotenone residues in raw honey by solid-phase extraction and high-performance liquid chromatography

A method for determining residues of the insecticide rotenone in raw-honey by high-performance liquid chromatography (HPLC) is described. To extract the residues, organic solvents such as ethyl acetate, n-hexane/dichloromethane and solid-phase extraction with octadecylsilane cartridges or Florisil packed columns were tested. Determination was carried out by reversed-phase HPLC using acetonitrile-buffer phosphate (pH 7) (60:40, v/v) as mobile phase and detection at 210 nm. Although the data showed that the two extraction methods were able to isolate the pesticide residues, the extraction on octadecylsilane cartridges was preferred due to its simplicity and higher recovery. Recoveries depended strongly on the fortification level for the two extraction procedures. Practical determination limits of 0.015 mg/kg were obtained. In the analysis of honeys, from beehives treated with rotenone at therapeutical doses for 1 month, residual amounts below 0.2 mg/kg were found.     

Characterisation of Sugar Cane Combustion Particles in the Araraquara Region, Southeast Brazil

Biomass burning is an important primary and secondary source of aerosol particles. The presence of carbonaceous particles in the respirable size range makes the study of this fraction important in view of possible health and climatic effects. The annual burning of sugar cane plantations causes emission of huge amounts of pyrogenic particles. Aerosol samples were collected in Araraquara city, São Paulo state, Brazil, during the harvest season for fine and coarse particles and bulk; they were analysed by electron-probe microanalysis, including facilities for low-Z element determination (low-Z EPMA) and by energy-dispersive X-ray fluorescence (EDXRF), in order to investigate the elemental composition of individual particles and bulk samples, respectively. Numerical analysis of the EPMA results by hierarchical clustering shows high contributions of carbonaceous particles that can be distinguished mainly in two different types: biogenic and carbon-rich. Additionally, two significant contributions of aluminosilicate particles were identified: as rather pure aluminosilicates or mixed with carbonaceous species. The EDXRF results are compatible with those of aerosol particles in Amazon, which is nowadays one of the main sources of biogenic particles in the world.     

Calorimetric measurement of ionexchange heats of homoionic heulandite and mordenite

The ionexchange heats of homoionic heulandite and mordenite were measured with a microcalorimeter. In the case of K, NH₄, Na, Mg and Ca, the selectivity of the zeolite is determined by the heat of hydration.We are very grateful to Dr. Ingemar Wadso from the Division of Thermochemistry of the University of Lund, Sweden, and to Dr. R. Ohlen from LKB, Sweden, for their advice, and to Ing. Valentina Zelenenko and Lic. Jose Sosa for providing homoionic samples.     

Emulsified microemulsions and oil-containing liquid crystalline phases

Self-assembled nanostructures, such as inverted type mesophases of the cubic or hexagonal geometry or reverse microemulsion phases, can be dispersed using a polymeric stabilizer, such as the PEO-PPO-PEO triblock copolymer Pluronic F127. The particles, which are described in the present study, are based on monolinolein (MLO)-water mixtures. When adding tetradecane (TC) to the MLO-water-F127 system at constant temperature, the internal nanostructure of the kinetically stabilized particles transforms from a Pn3m (cubosomes) to a H2 (hexosomes) and to a water-in-oil (W/O, L2) microemulsion phase (emulsified microemulsion (EME)). To our knowledge, this is the first time that the formation of stable emulsified microemulsion (EME) systems has been described and proven to exist even at room temperature. The same structural transitions can also be induced by increasing temperature at constant tetradecane content. The internal nanostructure of the emulsified particles is probed using small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). At each investigated composition and temperature, the internal structure of the dispersions is observed to be identical to the corresponding structure of the nondispersed, fully hydrated bulk phase. This is clear evidence for the fact that the self-assembled inner particle nanostructure is preserved during the dispersion procedure. In addition, the internal structure of the particles is in thermodynamic equilibrium with the surrounding water phase. The internal structure of the dispersed, kinetically stabilized particles is a "real" and stable self-assembled nanostructure. To emphasize this fact, we denoted this new family of colloidal particles (cubosomes, hexosomes, and EMEs) as "ISASOMES" (internally self-assembled particles or "somes").     

Chiral separation of some triazole pesticides by supercritical fluid chromatography

The enantiomeric separation of six triazole pesticides: cyproconazole, propiconazole, diniconazole, hexaconazole, tebuconazole and tetraconazole, using supercritical fluid chromatography and the Chiralpak AD column, is presented in this work. The effect of different organic modifiers such as methanol, ethanol and 2-propanol on the retention and resolution was studied as well as the presence of additives in the mobile phase. The results obtained were highly successful, all the compounds were enantiomerically separated and in most of the cases the analysis time was close to 10 min. The type of organic modifier that provided the best results depended on the compound.     

Selective oxidation of methanol on V2O5 and V2O5?MoO3 supported on montrmorillonite

Methanol oxidation on V₂O₅ and V₂O₅–MoO₃ catalysts supported on montmorillonite has been studied in the temperature range of 250–500°C. The V₂O₅–MoO₃ containing sample shows higher selectivity towards formaldehyde formation than the V₂O₅ catalyst.