Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

Improved ultrasonic extraction procedure for the determination of polycyclic aromatic hydrocarbons in sediments

The aim of this work was to optimize an ultrasonic extraction procedure for the determination of polycyclic aromatic hydrocarbons (PAHs) in sediments and to compare it with the reflux procedure using methanolic potassium hydroxide. Sample extracts were purified with a miniaturized silica gel chromatographic column and analyzed by gas chromatography-mass spectrometry (GC-MS). Ultrasonication using n-hexane-acetone (1:1, v/v) solvent mixture on dried homogenized marine sediment gave better precision (smaller relative standard deviation (RSD) values) and comparable quantities of individual PAH's compared to the reflux procedure. Ultrasonication with the n-hexane-acetone (1:1, v/v) mixture, utilizing four 15 min extraction cycles, was found to be sufficient for extracting PAHs from wet sediments. The optimized ultrasonic extraction procedure extracted aliphatic and aromatic hydrocarbons from the National Institute of Standards and Technology SRM 1941a with recoveries greater than 90%. The major advantages of ultrasonication compared to the reflux method are the lower extraction times, simplicity of the apparatus and extraction procedure. The optimized ultrasonication procedure has been used in our laboratory to extract hydrocarbons from naturally wet sediments from rivers, and coastal and marine areas.     

Determination of arsenic in petroleum refinery streams by electrothermal atomic absorption spectrometry after multivariate optimization based on Doehlert design

This paper reports the development of a methodology for the determination of arsenic in petroleum refinery aqueous streams containing large amounts of unknown volatile organic compounds, employing electrothermal atomic absorption spectrometry with polarized Zeeman-effect background correction. In order to make the procedure applicable, the influence of chemical modification and the drying step was examined. Also, pyrolysis and atomization temperatures and the amount of nitric acid added to the sample were optimized using a multivariate approach based on Doehlert matrix. Obtained results indicate that, in this kind of sample, arsenic must be determined by standard addition procedure with a careful control of the drying step temperature and ramp pattern. In order to evaluate the accuracy of the procedure, a test was performed in six spiked samples of petroleum refinery aqueous streams and the relative errors verified in the analysis of such samples (added As between 12.5 and 190 μg l⁻¹) ranged from −7.2 to +16.7%. The detection limit and the relative standard deviation were also calculated and the values are 68 pg and 7.5% (at 12.5 μg l⁻¹ level), respectively.     

Glueball spectroscopy in strongly coupled lattice gauge theories

We study the mass spectrum up to –7 (1–) log of pure three-dimensional lattice gauge theories with action (g _P) for real irreducible and small . Besides the lowest excitationm ₀–4log, we find two nearly degenerate excited statesm ₁,m ₂ withm _i–6log (i=1, 2) and (m ₁–m ₂) at leastO().Work partially supported by CNPq (Brasil)     

The particle structure ofv-dimensional Ising models at low temperatures

In this work we study thev-dimensional Ising model at low temperatures and establish the existence of an upper gap in the energy-momentum spectrum of the two-point function forv3. Forv=2, it is known that this gap is absent.Supported in part by Conselho Nacional de Pesquisas (CNPq-Brazil), Universidade Federal de Minas Gerais (Brazil) and the National Science Foundation under Grant PHY76-17191     

Synthesis of some 2-(heteroarylamino)benzimidazoles and their cyclization with phosgene

2-(Benzimidazol-2-ylamino)pyridine (4a) , 2-(benzimidazol-2-ylamino)pyrazine (4b) , and 2-(benzimidazol-2-ylamino)thiazole (4c) underwent a ring-closure reaction on treatment with phosgene affording 6H-pyrimido-[1′,2′:5,4][1,3,5]triazino[1,2-a]benzimidazol-6-one (1a) , 6H-pyrazino[1′,2′:5,4][1,3,5]triazino[1,2-a]benzimidazol-6-one (1b) , and 5H-thiazolo[2′,3′:4,5][1,3,5]triazino[1,2-a]benzimidazol-5-one (1c) respectively. The structure of these hitherto unknown heterocyclic systems was confirmed by their ir and mass spectra.     

Photophysics of aromatic molecules with low-lying pi sigma* states: excitation-energy dependence of fluorescence in jet-cooled aromatic nitriles

Excitation-energy dependence of fluorescence intensity and fluorescence lifetime has been measured for 4-dimethylaminobenzonitrile (DMABN), 4-aminobenzonitrile (ABN), 4-diisopropylaminobenzonitrile (DIABN), and 1-naphthonitrile (NN) in a supersonic free jet. In all cases, the fluorescence yield decreases rather dramatically, whereas the fluorescence lifetime decreases only moderately for S1 (pi pi*, L(b)) excess vibrational energy exceeding about 1000 cm(-1). This is confirmed by comparison of the normalized fluorescence excitation spectrum with the absorption spectrum of the compound in the vapor phase. The result indicates that the strong decrease in the relative fluorescence yield at higher energies is due mostly to a decrease in the radiative decay rate of the emitting state. Comparison of the experimental results with the TDDFT potential energy curves for excited states strongly suggests that the decrease in the radiative decay rate of the aminobenzonitriles at higher energies is due to the crossing of the pi pi* singlet state by the lower-lying pi sigma*(C[triple bond]N) singlet state of very small radiative decay rate. The threshold energy for the fluorescence "break-off" is in good agreement with the computed energy barrier for the pi pi*/pi sigma* crossing. For NN, on the other hand, the observed decrease is in fluorescence yield at higher excitation energies can best be attributed to the crossing of the pi pi* singlet state by the pi sigma* triplet state.     

Diastereoselective synthesis of cularine alkaloids via enium ions and an easy entry to isoquinolines by aza-Wittig electrocyclic ring closure

In preliminary communications, we reported the diastereoselective synthesis of cularine and sarcocapnine via the intramolecular ring closure of nitrenium and oxenium ions, a new highly diastereoselective reductive methylation with (+)-8-phenylmenthyl chloroacetate followed by reduction with sodium borohydride, and a facile entry to the isoquinoline precursors by aza-Wittig electrocyclic ring closure. We now report the full details of the syntheses of (+)-O-demethylcularine, (+)-cularine, (+)-sarcocapnidine, (+)-sarcocapnine, and (+)-crassifoline and describe different methods of synthesis of their precursors.     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.