Simultaneous determination of nine nucleosides and nucleobases in different Fritillaria species by HPLC‐diode array detector

A sensitive and reliable HPLC‐diode‐array detector method was developed for the first time to simultaneously determine nine nucleosides and nucleobases including uracil, cytidine, guanine, uridine, thymine, inosine, guanosine, thymidine and adenosine in 13 different Fritillaria species. The analysis was performed on a BaseLine C18 column with a gradient of acetonitrile in water at a flow rate of 0.8 mL/min. The diode‐array detector wavelength was set at 260 nm for the UV detection of nucleosides and nucleobases. Satisfactory separation of these compounds was obtained in less than 40 min. The optimized method provided good linear relation (r² >0.9995 for all the investigated analytes), satisfactory precision (RSD <1.51%) and good recovery (from 97.64 to 101.16%). The established method was successfully applied to simultaneous determination of nine nucleosides and nucleobases in 61 batches of samples from 13 Fritillaria species collected from different habitats in China, which could be helpful to control the quality of Fritillaria bulbs.     

Structure determination of selaginellins G and H from Selaginella pulvinata by NMR spectroscopy

Selaginellins G ( 1 ) and H ( 2 ), two new selaginellin derivatives, were isolated from the whole plant of Selaginella pulvinata. Their structures were elucidated, and complete assignments of the ¹H and ¹³C NMR spectroscopic data were achieved by 1D and 2D NMR experiments (HSQC, HMBC, COSY and ROESY). Compound 1 displayed good antifungal activity against Candida albicans with an IC₅₀ value of 5.3 µg/ml. Copyright © 2010 John Wiley & Sons, Ltd.     

A facile method for the preparation of monodisperse hollow silica spheres with controlled shell thickness

This article presents a facile, effective, mild synthesis process for well‐defined hollow spheres by using cationic polystyrene (PS) submicro‐particles as templates. In this approach, the cationic PS templates can be first prepared via emulsifier‐free polymerization by using the cationic monomer 2‐(methacryloyloxy) ethyltrimethylammonium chloride as comonomer, then, the silica shells from the sol‐gel process of tetraethoxysilane were coated on the surfaces of template particles via electrostatic interaction, finally the PS was dissolved in situ by modification of the reaction conditions in the same medium to form monodisperse hollow silica spheres with controlled shell thickness. Fourier transform‐infrared spectroscopy, thermogravimetric analysis, Brunauer‐Emmett‐Teller, transmission electron microscopy, and scanning electron microscope measurements were used to characterize these hollow silica spheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1332–1338, 2010     

A facile strategy to modify TiO2 nanoparticles via surface‐initiated ATRP of styrene

A core‐shell hybrid nanocomposites, possessing a hard core of nano titanium dioxide (n‐TiO₂) and a soft shell of brushlike polystyrene (PS), were successfully prepared by surface‐initiated atom transfer radical polymerization (ATRP) at 90 °C in anisole solution using CuBr/PMDETA as the catalyst, in the presence of sacrificial initiator. FTIR, ¹H NMR, XPS, TEM, SEM, TGA, and DSC were used to determine the chemical structure, morphology, thermal properties, and the grafted PS quantities of the resulting products. TEM images of the samples provided direct evidence for the formation of a core‐shell structure. The thermal stabilities of the grafted polymers were dramatically elevated relative to that of pristine PS according to TGA results. DSC results demonstrated that the TiO₂‐PS nanocomposites exhibited higher glass transition temperature (T_g) compared with pristine PS. The molecular weights of the free polymers formed by sacrificial initiator, which were similar to that of surface‐attached polymers were measured by GPC instrument which showed that the molecular weights of PS were well controlled with a relatively narrow polydispersity index (PDI < 1.2). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1782–1790, 2010     

Cleavage of polystyrene‐b‐poly(ethylene oxide) block copolymers with a trithiocarbonate linkage in solutions

In this work, the polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers with a trithiocarbonate group between the blocks were prepared by polymerization of styrene in the presence of a trithiocarbonate reversible addition fragmentation chain transfer (RAFT) agent connected with PEO. Decomposition of the trithiocarbonate group by UV irradiation was investigated in three different types of solvent: tetrahydrofuran (THF, common solvent for both blocks), cyclohexane/dioxane mixture (selective solvent for the PS block) and N,N‐dimethylformamide (DMF)/ethanol mixture (selective solvent for the PEO block). It is found that cleavage of the block copolymers can take place in all these three solvents and the cleavage ratio ranges from 76 to 86%. The micellar morphologies in selective solvents before and after cleavage were examined. It is observed that the size of the micelles is reduced after cleavage and sometimes aggregation of the micelles occurs due to removal of the corona of micelles. It shows that this work provides a facile and general method for synthesis of cleavable block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3834–3840, 2010     

pH‐induced on–off switching of polycarbonate track‐etched membranes by plasma‐induced surface grafting

Surface functionalization of the plasma‐pretreated polycarbonate (PC) track‐etched membranes via plasma‐induced thermally graft copolymerization of acrylic acid (AAc) was carried out. The resulting PC membranes with grafted AAc side chains were characterized by X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric (TG) analysis. The morphology of the PC membranes was studied by scanning electron microscopy (SEM). The results showed that the grafted PAAc polymers were formed uniformly inside the pores throughout the entire membrane thickness. With increase in the pore‐filling ratio, the pore diameters of PAAc‐grafted membranes became smaller. The PC‐g‐PAAc membranes exhibit rapid and reversible response of the flux to the environmental pH as pH is switched between 3 and 9. Between pH 3.5 and 5.5, the membranes demonstrate a pH‐valve function as the carboxyl group changes from neutral to charged with a corresponding variation in chain configuration. Copyright © 2009 John Wiley & Sons, Ltd.     

Separation and quantification of double‐ and triple‐layered rotavirus‐like particles by CZE

Virus‐like particles have been successfully used as safe vaccines, as their structure is identical to their native counterparts but devoid of the viral genetic material. However, production of these complex structures is not easy, as recombinant proteins must assemble into virus‐like particles. Techniques to differentiate assembled and soluble proteins, as well as assembly intermediaries often present in a sample, are required. An example of complex virus‐like particles mixture occurs when rotavirus proteins are recombinantly expressed. Rotavirus‐like particles (RLP) can be single (sl), double (dl), or triple layered (tl). The use of RLP preparations as vaccines requires their complete characterization, including separation and quantification of each RLP in a sample. In this work, CZE was evaluated for the separation and quantification of dl and triple‐layered rotavirus‐like particles (tlRLP). A fused‐silica capillary with a deoxycholate running buffer efficiently separated dl and tlRLP in RLP preparations, as they migrated in two discrete peaks with electrophoretic mobilities of 1.24±0.04 and 2.95±0.03 Ti, respectively. Standard curves for dl and tlRLP were generated, and the response was linearly proportional to analyte concentration. The methodology developed was quantitative, specific, accurate, precise, and reproducible. CZE allowed the quantitative characterization of RLP preparations, which is required for evaluation of immunogens, for process development, and for quality control protocols.     

Two New Daphniphyllum Alkaloids from Daphniphyllum calycinum

Two new daphniphyllum alkaloids named 2‐hydroxyyunnandaphnine D ( 1 ) and methyl 7‐hydroxyhomodaphniphyllate ( 2 ), together with eight known alkaloids, daphnioldhanin D, calyciphylline F, calyciphylline B, deoxycalyciphylline B, daphnicyclidin H, macropodumine C, 9,10‐epoxycalycine A, and yunnandaphnine A, were isolated from the stems and leaves of Daphniphyllum calycinum. Their structures and relative configurations were established on the basis of spectral evidence (including 2D‐NMR) and subsequently confirmed by a single‐crystal X‐ray crystallographic diffraction analysis.     

Three New Triterpene Saponins from Gynostemma pentaphyllum

Three new dammarane‐type triterpene saponins, 1 – 3 , together with three known compounds, 4 – 6 , were isolated from the aerial parts of Gynostemma pentaphyllum (Thunb.) Makino . By means of chemical and spectroscopic methods, their structures were established as (20S)‐3β,20,21‐trihydroxydammara‐23,25‐diene 3‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)] [β‐D ‐xylopyranosyl‐(1→3)]‐β‐D ‐glucopyranosyl‐21‐O‐β‐D ‐glucopyranoside ( 1 ), (20R,23R)‐3β,20‐dihydroxy‐19‐oxodammar‐24‐en‐21‐oic acid 21,23‐lactone 3‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)] [β‐D ‐xylopyranosyl‐(1→3)]‐α‐L ‐arabinopyranoside ( 2 ), and (21S,23S)‐3β,20ξ,21,26‐tetrahydroxy‐19‐oxo‐21,23‐epoxydammar‐24‐ene 3‐O‐[α‐L ‐rhamnopyranosyl‐(1→2)] [β‐D ‐xylopyranosyl‐(1→3)]‐α‐L ‐arabinopyranoside ( 3 ).     

Construction of a trigonal bipyramidal cage-based metal-organic framework with hydrophilic pore surface via flexible tetrapodal ligands

A pcu network can be ordered through trigonal bipyramidal nanocages as secondary building blocks, which have the striking feature of hydrophilic affinity to the polar molecules and π-π interactions for aromatic molecules.