MgO Nanoparticles as a Recyclable Heterogeneous Catalyst for the Synthesis of Polyhydroquinoline Derivatives under Solvent Free Conditions

Magnesium oxide nanopartticels in average size between 35–120 nm were prepared by sonochemistry method. Synthesis of polyhydroquinoline derivatives using MgO nanoparticles from the reaction of dimedone, benzaldehyde, ethyl acetoacetate and ammonium acetate under solvent‐free conditions is reported. Easy handling, reusability, thermal stability and non‐toxicity of the catalyst make the present protocol as an eco‐friendly and economically acceptable method for synthesis of these heterocycles.     

Efficient Multi‐component Synthesis of Highly Substituted Imidazoles Utilizing P2O5/SiO2 as a Reusable Catalyst

Phosphorus pentoxide supported on silica gel (P₂O₅/SiO₂) has been used as an efficient and reusable catalyst for the one‐pot pseudo four‐component synthesis of 2,4,5‐trisubstituted imidazoles from benzil or benzoin, aldehydes, and ammonium acetate. It was also used for four‐component preparation of 1,2,4,5‐tetrasubstituted imidazoles from benzil or benzoin, aldehydes, primary amine, and ammonium acetate under thermal solvent‐free conditions. The remarkable features of this new procedure are high conversions, cleaner reaction, simple experimental and work‐up procedures and also the catalyst can be easily separated from the reaction mixture and reused several times without any loss of its activity.     

A computational investigation of the electronic properties of Octahedral Al n N n and Al n P n cages (n = 12, 16, 28, 36, and 48)

Density functionla theory (DFT) calculations are performed to characterize geometric and electronic features of the octahedral Al _n N _n and Al _n P _n cages (n = 12, 16, 28, 32, and 48). Toward this aim, ¹⁵N, ²⁷Al, and ³¹P chemical shielding (CS) tensors as well as natural charge analyses are calculated for the optimized structures. CS parameters detect three distinct electronic environments for atoms within the Al _n N _n and Al _n P _n cages. The chemical shifts of N2 sites belonging to a hexagon and surrounded by three hexagons and a square obtained are different from those of N3 sites belonging to a hexagon that is surrounded only by hexagons—due to different curvatures exerted at the sites with different local structures. In addition, there is an increasing tendency in the Δσ values of the three local structures, Δσ (N1) > Δσ (N2) > Δσ (N3), N1 sites belonging to four-membered rings. The chemical shieldings of those Al and P sites belonging to a hexagon that is surrounded only by hexagons in the cages (360.7–366.7 and 496.5–514.7 ppm) are close to those previously reported for AlP nanotubes. Three distinct electrostatic environments around the N, Al, and P nuclei are also confirmed by the calculated natural charges. It should be noted that the positively charged Al atoms on the cages turn out to be the available sites for adsorption of H2 molecules.     

Solid phase extraction of Cd(II) and Pb(II) using a magnetic metal-organic framework, and their determination by FAAS

We describe a novel magnetic metal-organic framework (MOF) for the preconcentration of Cd(II) and Pb(II) ions. The MOF was prepared from the Fe₃O₄-pyridine conjugate and the copper(II) complex of trimesic acid. The MOF was characterized by IR spectroscopy, elemental analysis, SEM and XRD. A Box-Behnken design through response surface methodology and experimental design was used to identify the optimal parameters for preconcentration. Extraction time, amount of magnetic MOF and pH value were found to be critical factors for uptake, while type, volume, concentration of eluent, and elution time are critical in the elution step. The ions were then determined by FAAS. The limits of detection are 0.2 and 1.1 μg?L^?1 for Cd(II), and Pb(II) ions, respectively, relative standard deviations are <4.5% (for five replicates at 50 μg?L^?1 of Cd(II) and Pb(II) ions), and the enrichment capacity of the MOF is at around 190 mg?g^?1 for both ions which is higher than the conventional Fe3O4-pyridine material. The magnetic MOF was successfully applied to the rapid extraction of trace quantities of Cd(II) and Pb(II) ions in fish, sediment, and water samples.

A selective colorimetric and fluorescence chemosensing sensor for Cr<Superscript>3+</Superscript> based on a rhodamine base derivative

A rhodamine-conjugated coumarin (L) was used in designing a selective fluorescence chemosensor for the determination of trace amounts of Cr³⁺ ions in acetonitrile–water (MeCN/H₂O (90:10, %v/v) solutions. The intensity of the fluoresce emission of the chemosensor is intensified upon addition of Cr³⁺ ions in MeCN/H₂O (90:10, %v/v) solutions, due to the formation of a selective 1:1 complex between L and Cr³⁺ ions. The fluorescence enhancement versus Cr³⁺ concentration has been found to be linear from 1.0?×?10^?7 to 1.8?×?10^?5 M and a detection limit of 7.5?×?10^?8 M. The proposed fluorescent probe proved to be highly selective towards Cr³⁺ ions as compared to other common metal ions and could be successfully applied to the determination of Cr³⁺ concentrations in some water and wastewater samples.     

A New and Simple Electrocatalyst for Formaldehyde Oxidation; Nickel/poly(o‐Anisidine)/Film Modified Ionic Liquid Carbon Paste Electrode

In present work, the ionic liquid, 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide was incorporated in the carbon paste electrode as the binder (IL‐CPE). O‐anisidine (OA) monomer is electropolymerized in the presence of an aqueous acidic solution onto IL‐CPE (POA/IL‐CPE). The as‐prepared substrate is used as a porous matrix for dispersion of Ni(II) ions by immersing the modified electrode in a nickel(II) nitrite solution. The modified electrodes are characterized by scanning electron microscopy (SEM) and electrochemical methods. The POA/IL‐CPE was applied successfully to highly efficient (current density of 18.2 mA cm^?2) electrocatalytic oxidation of formaldehyde in alkaline medium. Finally, the rate constant for chemical reaction between formaldehyde and redox sites of the electrode was calculated.     

Sensitive Biosensor Based on Urease/In2O5Sn Nano-Coated Fluorinated SnO2 for Urea Detection in Blood Serum

Journal of Analytical Chemistry - A sensitive electrochemical matrix based on In2O5Sn nanoparticles modified fluorinated tin oxide (SnO2:F) conducting glass was reported. Besides, urease (Urs) was...     

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. In addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.     

Use of organofunctionalized nanoporous silica gel to improve the lifetime of carbon paste electrode for determination of copper(II) ions

A new functionalized nanoporous silica gel with dipyridyl group (DPNSG) was synthesized. Then, the potentiometric response of the copper(II) ion was investigated at a carbon paste electrode chemically modified with this newly designed functionalized nanoporous silica gel. The electrodes with DPNSG proportions of 15.0% (w/w) demonstrated very stable potentials. Calibration plots with Nernstian slopes for Cu²⁺ were observed, 28.4 (±1.0) mV decade⁻¹, over a wide linear concentration range (1.0 × 10⁻⁷ to 1.0 × 10⁻² M). The electrode exhibited a detection limit of 8.0 × 10⁻⁸ M. Moreover, the selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode presented a response time of ∼50 s, high performance, high sensitivity in a wide range of cation activities and good long-term stability (more than 9 months). The method was satisfactory and was used to determine the copper ion concentration in waste waters, contaminated by this metal.     

CFD Simulation of Rheological Model Effect on Cuttings Transport

Foam, as a non-Newtonian fluid, plays an important role in the underbalanced drilling technique in oil field development. The rheological properties of drilling fluids, such as foam, have a direct effect on flow characteristics and hydraulic performance. Two rheological models—the Herschel–Bulkley model and power law—were fitted to two foam systems in this study. Computational fluid dynamics (CFD) was used to simulate the effect of the rheological models on solid–liquid (cuttings transport) hydraulics in concentric and eccentric annulus during the foam drilling operation. The simulation results are compared to the experimental data from previous studies. The results of CFD using the power law model are in good agreement with experimental results in horizontal annulus with respect to the Herschel–Bulkley model with relative error less than 8%. Thus, for CFD cuttings transport for simulations in inclined and horizontal annulus, it is best to use the power law's rheological model parameters.