Factors affecting the morphology of benzoyl peroxide microsponges

Benzoyl peroxide (BPO) is primarily used in the treatment of mild to moderate acne. However, its application is associated with skin irritation. It has been shown that encapsulation and controlled release of BPO could reduce the side effect while also reducing percutaneous absorption when administered to the skin. The aim of the present investigation was to design and formulate an appropriate encapsulated form of BPO, using microsponge technology, and explore the parameters affecting the morphology and other characteristics of the resultant products employing scanning electron microscopy (SEM). Benzoyl peroxide particles were prepared using an emulsion solvent diffusion method by adding an organic internal phase containing benzoyl peroxide, ethyl cellulose and dichloromethane into a stirred aqueous phase containing polyvinyl alcohol (PVA). Different concentrations of BPO microsponges were incorporated in lotion formulations and the drug release from these formulations were studied. The SEM micrographs of the BPO microsponges enabled measurement of their size and showed that they were spherical and porous. Results showed that the morphology and particle size of microsponges were affected by drug:polymer ratio, stirring rate and the amount of emulsifier used. The results obtained also showed that an increase in the ratio of drug:polymer resulted in a reduction in the release rate of BPO from the microsponges. The release data showed that the highest and the lowest release rates were obtained from lotions containing plain BPO particles and BPO microsponges with the drug:polymer ratio of 13:1, respectively. The kinetics of release study showed that the release data followed Peppas model and the main mechanism of drug release from BPO microsponges was diffusion.     

Prospects of anionic nanolipoplexes in nanotherapy: transmission electron microscopy and light scattering studies

Currently nanosystems composed of polynucleotides and lipid vesicles (nanolipoplexes) are considered to be promising tools for gene therapeutics. Successful in vivo application of these vectors depends on their physicochemical, technological and biological characteristics including morphology, size distribution, molecular interactions and stability. Anionic nanoliposomes (DPPC:DCP:CHOL) were prepared by two different techniques, namely the conventional thin-film hydration method followed by extrusion, and the heating method (HM), in which no volatile solvent or detergent is used. A non-viral and non-cationic gene transfer vector was constructed by incorporating plasmid DNA (pcDNA3.1/His B/lacZ) to the HM-nanoliposomes by the electrostatic mediation of Ca²⁺ ions. Transfection efficiency of the nanolipoplexes was evaluated using a human bronchial epithelial cell line (16HBE14o-) in the presence of serum. Particle characterisation, stability of the formulations and lipid–DNA interaction studies were performed using transmission electron microscopy (TEM) and light scattering. TEM pictures of nanolipoplexes showed presence of two to four closely packed vesicles with signs of fusion. Efficient delivery of plasmid DNA and subsequent β-galactosidase expression was achieved using the anionic nanolipoplexes. Transfection efficiency increased with lipid:DNA ratio up to 7:1 (w/w), where transfection efficiency was 12-fold higher than in untreated cells. Further increase in lipid ratio decreased transfection. These nanolipoplexes appear to be safe, stable and efficient in the protection and delivery of DNA to different cells and tissues.     

Time-dependent discrete road network design with both tactical and strategic decisions

This paper aims to model and investigate the discrete urban road network design problem, using a multi-objective time-dependent decision-making approach. Given a base network made up with two-way links, candidate link expansion projects, and candidate link construction projects, the problem determines the optimal combination of one-way and two-way links, the optimal selection of capacity expansion projects, and the optimal lane allocations on two-way links over a dual time scale. The problem considers both the total travel time and the total CO emissions as the two objective function measures. The problem is modelled using a time-dependent approach that considers a planning horizon of multiple years and both morning and evening peaks. Under this approach, the model allows determining the sequence of link construction, the expansion projects over a predetermined planning horizon, the configuration of street orientations, and the lane allocations for morning and evening peaks in each year of the planning horizon. This model is formulated as a mixed-integer programming problem with mathematical equilibrium constraints. In this regard, two multi-objective metaheuristics, including a modified non-dominated sorting genetic algorithm (NSGA-II) and a multi-objective B-cell algorithm, are proposed to solve the above-mentioned problem. Computational results for various test networks are also presented in this paper.     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

A highly sensitive spectrophotometric determination of ultra trace amounts of azide ion in water and biological samples after preconcentration using dispersive liquid-liquid microextraction technique

A simple and highly sensitive method developed for preconcentration and spectrophotometric determination of ultra trace amounts of azide ion (N ₃ ^? ) in water and biological samples using dispersive liquid-liquid microextraction (DLLME) technique. The method is based on ion association formation of azide ion with malachite green and extraction of the ion pairing product using DLLME technique. Some important parameters, such as reaction conditions and the kind and volume of extraction solvent and disperser solvent were studied and optimized. The calibration curve was linear in the range of 0.5–50 μg/L of azide ion. Also, the enrichment factor and extraction recovery obtained were 24.7 and 98.7%, respectively. The method was applied to the determination of azide ion in water and biological samples.     

Electrochemical synthesis and characterization of solid-phase microextraction fibers using conductive polymers: application in extraction of benzaldehyde from aqueous solution

In this work, polyaniline, polypyrrole, and polyaniline/polypyrrole composite fibers were synthesized in the absence and presence of oxidized multiwalled carbon nanotubes using electrochemical cyclic voltammetry with CF₃COOH as dopant. Thermal stability of these fibers was studied by differential scanning calorimetry. Then, headspace solid-phase microextraction process coupled with gas chromatography and flame ionization detector was used for comparing extraction capability of benzaldehyde from aqueous solution. Since polyaniline fiber showed better extraction efficiency than the other fibers, its preparation conditions including acid concentration, aniline concentration, scan rate, and amount of multiwalled carbon nanotubes were studied by means of the “one-factor-at-a-time method”. The analytical performance of polyaniline fibers were investigated to determine benzaldehyde from the aqueous solution. The morphology and texture of polyaniline fibers were examined by field emission scanning electron microscopy and Fourier transform infrared spectroscopy analyses. The attained results revealed that the perfect conditions for acid concentration, aniline concentration, scan rate, and multiwalled carbon nanotubes content were 0.5 M, 0.2 M, 25 mV s^?1, and 0.02 wt%, respectively. The limit of detection for the proposed polyaniline fiber was 15 ng ml^?1.     

Electrochemically Generated Nanoparticles of Halogen‐Bridged Mixed‐Valence Binuclear Metal Complex Chains

Spherical nanoparticles composed of MMX chains can be made by a polymerization strategy driven by electrochemical processes. In particular, the [Pt₂(MeCS₂)₄I₂] (MMI₂) dimetal subunit is employed as a monomer for the formation of [Pt₂(MeCS₂)₄I]_n spherical nanostructures on surfaces. We have paid particular attention to elucidating the general mechanism of the deposition process on the basis of in situ electrochemical measurements. The reduction of MMI₂ to give the electrodeposition of nanostructures agrees well with formation of the reduced [MMI₂]^? species followed by a disproportionation mechanism mediated by iodide anions. The chemical composition of the particles was determined by energy‐dispersive X‐ray spectroscopy (EDX) and X‐ray photoelectron spectroscopy (XPS) to reveal the MMI₂ polymer.     

含吡啶的大环席夫碱锰(Ⅱ)配合物:合成、表征及抗菌性质(英文)

在Mn髤模板作用下,2,6-diacetylpyridine(DAP)及合适链状胺化合物通过[1+1]环缩合反应,合成了3个大环席夫碱配合物,并进行了红外、元素分析、质谱及电导率等表征及研究。测得了配合物[MnL1(CH3CN)](ClO4)2的晶体结构,中心离子呈现出稍微扭曲的五角锥配位构型。研究了配合物对S.aureus(ATCC 6633),B.cereus(ATCC 7064),C.xerosis(ATCC 373)(gram-positive bacterial strains),E.coli(PTCC 10009),K.pneuomoniae(MTCC 109),and P.vulgaris(lio)(gram-negative bacterial strains)的抗菌活性。结果显示[MnL3](ClO4)2抗菌活性明显优于[MnL1(CH3CN)](ClO4)2and[MnL2](ClO4)2。在25℃条件下0.1 mol·L-1 KCl溶液中,通过电位计量法测定了化合物的质子化常数。     

Silver nanoparticle decorated poly(2-aminodiphenylamine) modified carbon paste electrode as a simple and efficient electrocatalyst for oxidation of formaldehyde

This work describes the promising activity of silver nanoparticles on the surface of a poly(2-amino diphenylamine) modified carbon paste electrode (CPE) towards formaldehyde oxidation. Electrodeposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2-aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemically deposited on the surface of the electrode. The electrochemical and morphological characteristics of the modified electrode were investigated. The electro-oxidation of formaldehyde on the surface of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solution of 0.1 mol/L NaOH. The electro-oxidation onset potential was found to be around -0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocatalytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formaldehyde in alkaline media was calculated to be 0.47 × 10^-6 cm²/s using chronoamperometry.