Simultaneous isocratic separation of phenolic acids and flavonoids using micellar liquid chromatography

The simultaneous isocratic separation of a mixture of five phenolic acids and four flavonoids (two important groups of natural polyphenolic compounds with very different polarities) was investigated in three different RPLC modes using a hydro‐organic mobile phase, and mobile phases containing SDS at concentrations below and above the critical micellar concentration (submicellar LC and micellar LC (MLC), respectively). In the hydro‐organic mode, methanol and acetonitrile; in the submicellar mode methanol; and in the micellar mode, methanol and 1‐propanol were examined individually as organic modifiers. Regarding the other modes, MLC provided more appropriate resolutions and analysis time and was preferred for the separation of the selected compounds. Optimization of separation in MLC was performed using an interpretative approach for each alcohol. In this way, the retention of phenolic acids and flavonoids were modeled using the retention factors obtained from five different mobile phases, then the Pareto optimality method was applied to find the best compatibility between analysis time and quality of separation. The results of this study showed some promising advantages of MLC for the simultaneous separation of phenolic acids and flavonoids, including low consumption of organic solvent, good resolution, short analysis time, and no requirement of gradient elution.     

One-pot efficient synthesis of disulfides from alkyl halides and alkyl tosylates using thiourea and elemental sulfur without contamination by higher polysulfides

An efficient and odorless synthesis of disulfides from alkyl halides using thiourea and elemental sulfur in the presence of sodium carbonate in wet polyethylene glycol (PEG 200) at 40 °C without contamination by higher polysulfides has been developed. This procedure was then extended to preparation of disulfides from alkyl tosylates at 70 °C.     

New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode for determination of dopamine in real samples

Room temperature 1-butyl-3-methylimidazolium tetraflouroborate ([BMIM][BF₄]) ionic liquid was employed for dispersion of multi walled carbon nanotubes (MWCNTs) and the formation of nanocomposite on the surface of a carbon-ceramic electrode. The surface of the modified electrode was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The modified electrode exhibited excellent electrochemical activity to oxidation of dopamine (DA); whereas electro oxidation of ascorbic acid (AA) was not seen and electro oxidation of uric acid (UA) appeared at a more positive potential than DA. The multi walled carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode was used for the selective determination of DA in the presence of high levels of AA and UA using differential pulse voltammetry. The calibration curve for DA was linear in the range of 3.00 to 130 µM with the detection limit (S/N=3) of 0.87 µM. The present electrode was successfully applied to the determination of DA in some commercial pharmaceutical samples and human blood serum.      

A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

A New and Simple Electrocatalyst for Formaldehyde Oxidation; Nickel/poly(o‐Anisidine)/Film Modified Ionic Liquid Carbon Paste Electrode

In present work, the ionic liquid, 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide was incorporated in the carbon paste electrode as the binder (IL‐CPE). O‐anisidine (OA) monomer is electropolymerized in the presence of an aqueous acidic solution onto IL‐CPE (POA/IL‐CPE). The as‐prepared substrate is used as a porous matrix for dispersion of Ni(II) ions by immersing the modified electrode in a nickel(II) nitrite solution. The modified electrodes are characterized by scanning electron microscopy (SEM) and electrochemical methods. The POA/IL‐CPE was applied successfully to highly efficient (current density of 18.2 mA cm^?2) electrocatalytic oxidation of formaldehyde in alkaline medium. Finally, the rate constant for chemical reaction between formaldehyde and redox sites of the electrode was calculated.     

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL^?1, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL^?1 with the coefficients of correlation (r ² ) ranging from 0.998 to 0.999.     

Silica‐Bound 3‐{2‐[Poly(ethylene Glycol)]ethyl}‐Substituted 1‐Methyl‐1H‐imidazol‐3‐ium Bromide: A Recoverable Phase‐Transfer Catalyst for Smooth and Regioselective Conversion of Oxiranes to β‐Hydroxynitriles in Water

A series of β‐hydroxynitriles were efficiently synthesized from the regioselective ring opening of oxiranes by cyanide anion in the presence of silica‐bound 3‐{2‐[poly(ethylene glycol)]ethyl}‐substituted 1‐methyl‐1H‐imidazol‐3‐ium bromide (SiO₂? PEG? ImBr) as a novel recoverable phase‐transfer catalyst in H₂O (Scheme 1 and Table 2). The workup procedure was straightforward, and the catalyst could be reused over four times with almost no loss of catalytic activity and selectivity.     

Palladium-Catalyzed Synthesis of Symmetrical Biaryls Under Microwave Irradiation and Conventional Heating

The activity of the [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(µ-Br)]₂ complex was investigated in the synthesis of symmetrical biaryls under both conventional and microwave irradiation conditions, and their results were compared. This complex is efficient, stable, and not sensitive to air or moisture and is a catalyst for the homo-coupling reaction of aryl iodides, bromides, and even chlorides. The products were produced in excellent yields in short reaction times using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)(µ-Br)]₂ complex in N-methylpyrolidine (NMP) at 130 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave better yields in shorter reaction times.     

High‐Efficiency Conversion of Trimethylsilyl Ethers to Their Corresponding Ethers using Carbon‐Based Solid Acid as a New Catalyst in Heterogeneous Mixtures

Carbon‐based solid acid was used as a new catalyst for conversion of trimethylsilyl ethers to their corresponding ethers in heterogeneous mixtures. The experiments were done moderately at room temperature, and high yields in suitable times were obtained under these conditions.