Chemical and thermal stability of alkanethiol and sulfur passivated InP(100)

InP(100) surfaces treated with Na2Sx9H20 and CnH(2n+1)SH are examined by contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy to determine the chemical and thermal behavior of these passivated surfaces. The surfaces coated by octadecanethiol (n = 18) self-assembled monolayers (SAMs) are found to be more stable toward oxidation than the S-passivated surface. The chemical stability of octadecanethiol SAMs in various environments is examined. The thiol monolayer is found to be stable in 0.1 M HCl but degrades in 0.1 M NaOH, boiling chloroform, and water. The behavior of these surfaces at elevated temperatures under a vacuum is also investigated. The octadecanethiol-coated InP(100) is stable up to 473 K, above which the films begin to degrade. Unlike other substrates on which the entire molecule including the sulfur headgroup desorbs together, on InP, the sulfur headgroup remains on the surface even after annealing to 673 K. These observations suggest that the desorption occurs by S-C bond cleavage as well as In-S bond cleavage. The sulfur of S-passivated InP is found to be more thermally stable than that of the octadecanethiol monolayer, perhaps due to their different bonding geometries and hence energies.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–XV. ANTHRALIN and ITS OXIDATION PRODUCT 1,8-DIHYDROXYANTHRAQUINONE

The photochemistry (Type I and II) of anthralin and its photo-oxidation product 1,8-dihydroxyanthraquinone (1,8-DHAQ) has been studied in ethanol, acetonitrile and dimethylsulfoxide using spin-trapping and direct detection of singlet oxygen (1O2) luminescence techniques. In ethanol, where it exists in its neutral form (AN), anthralin does not undergo either Type I or II reactions upon UV-irradiation. In contrast, irradiation of anthralin in acetonitrile, a solvent in which anthralin is partially converted to its corresponding mono-anion (AN-), generates both superoxide and singlet oxygen. Irradiation of anthralin in dimethylsulfoxide, where the AN- form is present in substantial quantity, generates superoxide and solvent derived radicals but no detectable singlet oxygen. UV-irradiation of 1,8-DHAQ in ethanol and acetonitrile produces both superoxide and singlet oxygen in significant yields. In dimethylsulfoxide, on the other hand, only superoxide and solvent derived radicals are observed. The 1O2 quantum yield for AN- and 1,8-DHAQ in acetonitrile were determined to be 0.14 and 0.88 relative to rose bengal in the same solvent. These findings suggest that the AN photosensitization occurs via Type I and II pathways, is solvent dependent and involves AN- as well as its oxidation product 1,8-DHAQ, which is a more potent generator of both singlet oxygen and superoxide.     

A study of peroxyoxalate-chemiluminescence of acriflavine

The chemiluminescence arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of acriflavine has been studied. The relationship between the chemiluminescence intensity and concentrations of TCPO, H2O2, acriflavine and the base sodium salicylate are reported. The kinetic parameters for the peroxyoxalate-chemiluminescence (PO-CL) of acriflavine were evaluated from the computer fitting of the corresponding chemiluminescence intensity-time plots.     

A heterocyclic peptide nanotube

An open-ended hollow tubular structure is designed based on hydrogen-bond-directed self-assembly of a chimeric cyclic peptide subunit comprised of alternating alpha- and epsilon-amino acids. The design features a novel 1,4-disubstituted-1,2,3-triazole epsilon-amino acid and its utility as a peptide backbone substitute. The N-Fmoc-protected epsilon-amino acid was synthesized in high yield and optical purity in three steps from readily available starting materials and was employed in solid-phase peptide synthesis to afford the desired cyclic peptide structure. The cyclic peptide self-assembly has been studied in solution by (1)H NMR and mass spectrometry and the resulting tubular ensemble characterized in the solid state by X-ray crystallography.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS. XVIII. INDOMETHACIN

Abstract— The photochemistry, photophysics, and photosensitization (Type I and II) of indomethacin (IN) (N-[p-chlorobenzoyl]-5-methoxy-2-methylindole-3-acetic acid) has been studied in a variety of solvents using NMR, high performance liquid chromatography-mass spectroscopy, transient spectroscopy, electron paramagnetic resonance in conjunction with the spin trapping technique, and the direct detection of singlet molecular oxygen (^l O₂) luminescence. Photodecomposition of IN (λ_ex > 330 nm) in degassed or air-saturated benzene proceeds rapidly to yield a major (2; N-[p-chlorobenzoyl]-5-methoxy-2-methyl-3-methylene-indoline) and a minor (3; N-[p-chlorobenzoyl]-5-methoxy-2, 3-dimethyl-indole) decarboxylated product and a minor indoline (5; 1-en-5-methoxy-2-methyl-3-methylene-in-doline), which is formed by loss of the p-chlorobenzoyl moiety. In air-saturated solvents two minor oxidized products 4 (N-[p-chlorobenzoyl]-5-methoxy-2-methylindol-3-aldehyde) and 6 (5-methoxy-2-methyl-indole-3-aldehyde) are also formed. When photolysis was carried out in ¹⁸O₂-saturated benzene, the oxidized products 4 and 6 contained ¹⁸O, indicating that oxidation was mediated by dissolved oxygen in the solvent. In more polar solvents such as acetonitrile or ethanol, photodecomposition is extremely slow and inefficient. Phosphorescence of IN at 77 K shows strong solvent dependence and its emission is greatly reduced as polarity of solvent is increased. Flash excitation of IN in degassed ethanol or acetonitrile produces no transients. A weak transient is observed at 375 nm in degassed benzene, which is not quenched by oxygen. Irradiation of IN (λ_ex > 325 nm) in N₂-gassed C₆H₆ in the presence of 5, 5-dimethyl-1-pyrroline-N-oxide (DMPO) results in the trapping of two carbon-centered radicals by DMPO. One adduct was identified as DMPO/^.COC₆H₄-p-CI, while the other was probably derived from a radical formed during IN decarboxylation. In air-saturated benzene, (hydro) peroxyl and alkoxyl radical adducts of DMPO are observed. A very weak luminescence signal from ¹O₂ at 1268 nm is observed initially upon irradiation (λ_ex= 325 nm) of IN in air-saturated benzene or chloroform. The intensity of this ¹O₂ signal increases as irradiation is continued suggesting that the enhancement in ¹O₂ yield is due to photoproduct(s). Accordingly, when 2 and 3 were tested directly, 2 was found to be a much better sensitizer of ¹O₂ than IN. In air-saturated ethanol or acetonitrile no IN ¹O₂ luminescence is detected even on continuous irradiation. The inability of IN to cause phototoxicity may be related to its photo stability in polar solvents, coupled with the low yield of active oxygen species (¹O₂, O₂^?_-) upon UV irradiation.     

A tetra-coordinate nickel(II) complex as neutral carrier for nitrate-selective PVC membrane electrode

The potentiometric response properties and applications of a tetra-coordinate nickel(II) complex with relatively high selectivity toward nitrate ion are described. The nickel(II) complex of 5,7,12,14-tetramethyl-1,4,8,11-tetraazacyclotetradeca-4,6,11,13-tetraene was used as a neutral carrier into plasticized poly(vinyl chloride) (PVC) membrane. The influence of several variables was investigated in order to optimize the potentiometric response and selectivity of the electrode. The resulting membrane electrode incorporating 31.0% PVC, 61.0% dioctyl phthalate (DOP) as plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% carrier (all w/w) demonstrates a Nernstian response slope of −59.6 mV per decade over the concentration range of 5×10⁻⁶-1×10⁻¹ M NO₃⁻. The electrode exhibits a fast response time (≤10 s), a detection limit of 2.5×10⁻⁶ M, and can be used over a wide pH range of 4-12. The electrode shows improved selectivity in comparison to most of the previously reported nitrate-selective electrodes. It was successfully applied to the determination of nitrate ion in natural water samples.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Lead ion selective PVC membrane electrode based on 5,5'-dithiobis-(2-nitrobenzoic acid)

A PVC membrane electrode for lead ions based on 5,5′-dithiobis-(2-nitrobenzoic acid) as membrane carrier was prepared. The electrode exhibits a Nernstian response for Pb²⁺ over a wide concentration range (1.0×10⁻²–4.0×10⁻⁶ M). It has a relatively fast response time and can be used for at least 3 months without any divergence in potentials. The proposed electrode revealed good selectivities for Pb²⁺ over a wide variety of other metal ions and could be used in a pH range of 2.0–7.0. It was used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

Acetylenchemie 12. Mitt.: Weitere studien über die phasentransfer-katalysierte umsetzung des 9(10H)-acridinons mil alkinylhalogeniden

By the phase transfer catalyzed reaction of 9(10H)-acridinone with 1-bromo-2-propyne, 10-(2-propynyl)-9(10H)-acridinone is synthesized. As prototropic rearrangement products of this 10-(1,2-propadienyl)-9(10H)-acridinone and 10-(1-propynyl)-9(10H)-acridinone are obtained, Under the given conditins 1-bromo-2butyne leads to 10-(2-butynyl)-9(10H)-acridinone and 2-chloro-3-butyne leads to 10-(1-methyl-1,2-propddienyl)-9(10H)-acridinone, 10-(1-methyl-2-propynyl)-9(10H)-acridinone, 9-(1-methyl-2-propynyloxy)acridine and 10-[1-methyl-3-(3,4-dimethylphenyl-2-propynyl)]-9(10H)-acridinone. The formation of the products is experimentally confirmed and with published work compared.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.