Sargassum fusiforme Polysaccharide-Based Hydrogel Microspheres Enhance Crystal Violet Dye Adsorption Properties

In this study, a polysaccharide-based hydrogel microsphere (SFP/SA) was prepared using S. fusiforme polysaccharide (SFP) and sodium alginate (SA). Fourier transform infrared spectroscopy (FT-IR) demonstrated that SFP was effectively loaded onto the hydrogel microsphere. Texture profile analysis (TPA) and differential scanning calorimetry (DSC) showed that, with the increase of SFP concentration, the hardness of SFP/SA decreased, while the springiness and cohesiveness of SFP/SA increased, and the thermal stability of SFP/SA improved. The equilibrium adsorption capacity of SFP/SA increased from 8.20 mg/g (without SFP) to 67.95 mg/g (SFP accounted 80%) without swelling, and from 35.05 mg/g (without SFP) to 81.98 mg/g (SFP accounted 80%) after 24 h swelling. The adsorption of crystal violet (CV) dye by SFP/SA followed pseudo-first order and pseudo-second order kinetics (both with R² > 0.99). The diffusion of intraparticle in CV dye was not the only influencing factor. Moreover, the adsorption of CV dye for SFP/SA (SFP accounted 60%) fit the Langmuir and Temkin isotherm models. SFP/SA exhibited good regenerative adsorption capacity. Its adsorption rate remained at > 97% at the 10th consecutive cycle while SFP accounted for 80%. The results showed that the addition of Sargassum fusiforme polysaccharide could increase the springiness, cohesiveness and thermal stability of the hydrogel microsphere, as well as improve the adsorption capacity of crystal violet dye.     

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO₂ co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO₂ co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO₂ co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by β-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO₂ co-solvent then ultrasound and ethanolic extraction methods. SCF-CO₂ co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC₅₀ value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO₂ co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO₂ method was finally found to be superior and could be used in large-scale processing.     

Correlation between Irradiation Treatment and Metabolite Changes in Bactrocera dorsalis (Diptera: Tephritidae) Larvae Using Solid-Phase Microextraction (SPME) Coupled with Gas Chromatography-Mass Spectrometry (GC-MS)

The metabolites produced by the larvae of Bactrocera dorsalis (Diptera: Tephritidae) exposed to different doses of irradiation were analyzed using solid phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS), and a metabonomic analysis method of irradiated insects based on GC-MS was established. The analysis revealed 67 peaks, of which 23 peaks were identified. The metabolites produced by larvae treated with different irradiation doses were compared by multivariate statistical analysis, and eight differential metabolites were selected. Irradiation seriously influenced the fatty acid metabolic pathway in larvae. Using the R platform combined with the method of multivariate statistical analysis, changes to metabolite production under four irradiation doses given to B. dorsalis larvae were described. Differential metabolites of B. dorsalis larvae carried chemical signatures that indicated irradiation dose, and this method is expected to provide a reference for the detection of irradiated insects.     

Toxic Effect of Fullerene and Its Derivatives upon the Transmembrane β2-Adrenergic Receptors

Numerous experiments have revealed that fullerene (C₆₀) and its derivatives can bind to proteins and affect their biological functions. In this study, we explored the interaction between fullerine and the β₂-adrenergic receptor (β₂AR). The MD simulation results show that fullerene binds with the extracellular loop 2 (ECL2) and intracellular loop 2 (ICL2) of β₂AR through hydrophobic interactions and π–π stacking interactions. In the C₆₀_in1 trajectory, due to the π–π stacking interactions of fullerene molecules with PHE and PRO residues on ICL2, ICL2 completely flipped towards the fullerene direction and the fullerene moved slowly into the lipid membrane. When five fullerene molecules were placed on the extracellular side, they preferred to stack into a stable fullerene cluster (a deformed tetrahedral aggregate), and had almost no effect on the structure of β₂AR. The hydroxyl groups of fullerene derivatives (C₆₀(OH)_X, X represents the number of hydroxyl groups, X = 4, 8) can form strong hydrogen bonds with the ECL2, helix6, and helix7 of β₂AR. The hydroxyl groups firmly grasp the β₂AR receptor like several claws, blocking the binding entry of ligands. The simulation results show that fullerene and fullerene derivatives may have a significant effect on the local structure of β₂AR, especially the distortion of helix4, but bring about no great changes within the overall structure. It was found that C₆₀ did not compete with ligands for binding sites, but blocked the ligands’ entry into the pocket channel. All the above observations suggest that fullerene and its derivatives exhibit certain cytotoxicity.     

The Potential Antidepressant Action of Duloxetine Co-Administered with the TAAR1 Receptor Agonist SEP-363856 in Mice

Here, we explored the possible interaction between duloxetine and SEP-363856 (SEP-856) in depression-related reactions. The results showed that oral administration of duloxetine showed powerful antidepressant-like effects in both the forced swimming test (FST) and the suspension tail test (TST). SEP-856 orally administered alone also exerted an antidepressant-like effect in FST and TST, especially at doses of 0.3, 1, and 10 mg/kg. In addition, duloxetine (15 mg/kg) and SEP-856 (15 mg/kg) both showed antidepressant-like effects in the sucrose preference test (SPT). Most importantly, in the above experiments, compared with duloxetine alone, the simultaneous use of duloxetine and SEP-856 caused a more significant antidepressant-like effect. It is worth noting that doses of drug combination in FST and TST did not change the motor activities of mice in the open-field test (OFT). Thus, duloxetine and SEP-856 seem to play a synergistic role in regulating depression-related behaviors and might be beneficial for refractory depression.     

Asymmetric conductivity of the Kondo effect in cold atomic systems

Motivated by recent theoretical and experimental advances in quantum simulations using alkaline earth(AE)atoms,we put forward a proposal to detect the Kondo physics in a cold atomic system.It has been demonstrated that the intrinsic spin-exchange interaction in AE atoms can be significantly enhanced near a confinement-induced resonance(CIR),which facilitates the simulation of Kondo physics.Since the Kondo effect appears only for antiferromagnetic coupling,we find that the conductivity of such system exhibits an asymmetry across a resonance of spin-exchange interaction.The asymmetric conductivity can serve as the smoking gun evidence for Kondo physics in the cold atom context.When an extra magnetic field ramps up,the spin-exchange process near Fermi surface is suppressed by Zee-man energy and the conductivity becomes more and more symmetric.Our results can be verified in the current experimental setup.     

Application of 28Mg to the kinetic study of Mg uptake by rice plants

The time course of Mg uptake and release using intact rice plants and ²⁸Mg as a tracer is presented. Since there is no conventional Mg tracer available, ²⁸Mg was produced via ²⁷Al(α, 3p)²⁸Mg reaction using a cyclotron. Using the purified ²⁸Mg tracer, it was found that the uptake amount of ²⁸Mg by the rice plants increased linearly during 30 min of application. After ²⁸Mg treatment for 90 min, the roots were sequentially washed with iced solution for 120 min. Within about 10 min, almost all of the ²⁸Mg, that was thought to be weakly bound to the apoplast, was washed away.     

Poly(lactic acid) composites with poly(lactic acid)‐modified carbon nanotubes

This work reports the study of the effect of chemical functionalization of carbon nanotubes on their dispersion in poly(lactic acid). The nanotubes were functionalized by the 1,3‐dipolar cycloaddition reaction, generating pyrrolidine groups at the nanotube surface. Further reaction of the pyrrolidine groups with poly(lactic acid) was studied in solution and in the polymer melt. The former involved refluxing the nanotubes in a dimethylformamide/polymer solution; the latter was carried out by direct melt mixing in a microcompounder. The carbon nanotubes collected after each process were characterized by thermogravimetry and by X‐ray photoelectron spectroscopy, showing evidence of polymer bonded to the nanotube surface only when the reaction was carried out in the polymer melt. The composites with polymer modified nanotubes present smaller average agglomerate area and a narrower agglomerate area distribution. In addition, they show improved tensile properties at low CNT concentration and present lower electrical resistivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3740–3750     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Effect of pH and ligand charge state on BACE-1 fragment docking performance

In this work we propose a protocol for estimating the effect of pH on the docking performance to BACE-1, which affords the charge state of the inhibitor as well as the protonation state of all ionisable residues in the protein at a given pH value. To the best of our knowledge, this is the first report of a protocol predicting the BACE-1 ligand docking poses not only at the neutral pH at which most crystallographic structures were obtained, but also at the optimal pH of the enzyme (in the acidic range), at which most of the BACE-1 binding affinity assays are performed. We have applied this protocol to a set of 23 fragment-like BACE-1 ligands that span four orders of magnitude in their binding affinities. The pK _a values of the BACE-1 acidic residues deviate substantially from the estimates for model compounds in solution and display a ligand dependent variability, especially in the case of the catalytic Asp dyad residues. This outcome should have a strong bearing on the design of protocols for docking based BACE-1 screening campaigns. Finally, we were able to find an explanation for the poor docking success rate of some fragments based on the availability of anchoring points, a rationale that could help to improve hit rates in BACE-1 screening campaigns.