Characterization of gallotannins and benzophenone derivatives from mango (Mangifera indica L. cv. 'Tommy Atkins') peels, pulp and kernels by high-performance liquid chromatography/electrospray ionization mass spectrometry

Polyphenolics were extracted from peels, pulp and kernels of mango fruits (Mangifera indica L. cv. 'Tommy Atkins') and characterized by high-performance liquid chromatography/electrospray ionization mass spectrometry. In the peel 18 gallotannins and five benzophenone derivatives were detected which were tentatively identified as galloylated maclurin and iriflophenone glucosides. Twenty-one and eight gallotannins were found in the kernels and pulp, respectively, whereas no evidence for the presence of benzophenone derivatives was obtained. Gallotannins quantified by the rhodanine assay amounted to 1.4 mg/g dm in the peels (expressed as gallic acid), while only small amounts (0.2 mg/g dm) were found in the pulp. In contrast, mango kernels contained 15.5 mg/g dm and thus proved to be a rich source of gallotannins.     

Nanostructure investigations with the analytical transmission electron microscope

Concerning the conventional TEM-imaging as well as the analytical procedures the capabilities are pointed out: electron diffraction, energy dispersive X-ray spectroscopy (EDXS) and electron energy loss spectroscopy (EELS). The possibilities of investigation of both nanocrystalline materials and multilayers are discussed, accompanied by examples of current investigations: At alloys, produced by intense milling, at single nanocrystals the imaging by diffraction contrast was successful, the analysis has failed because of the sample thickness. By means of energy spectroscopic imaging multilayers from Fe-SiB/NbCu and Fe/Cr as well as Al₂O₃/TiN have been characterized. Received: 15 July 1997 / Revised: 16 February 1998 / Accepted: 21 February 1998     

Bis[N,N′‐diisopropylbenzamidinato(−)]silicon(II): Lewis Acid/Base Reactions with Triorganylboranes

Reaction of the donor‐stabilized silylene 1 (which is three‐coordinate in the solid state and four‐coordinate in solution) with BEt₃ and BPh₃ leads to the formation of the Lewis acid/base complexes 2 and 3 , respectively, which are the first five‐coordinate silicon compounds with an Si?B bond. These compounds were structurally characterized by crystal structure analyses and by multinuclear NMR spectroscopic studies in the solid state and in solution. Additionally, the bonding situation in 2 and 3 was analyzed by quantum chemical studies.     

Aktivierung von CO2 an Übergangsmetallzentren: Zum Ablauf der CO2-Reduktion an Nickel(0)-Fragmenten

Activation of CO₂ at Transition Metal Centres: The Route of the CO₂ Reduction at Nikel(0) Moieties A competing reaction in the catalytic cyclooligomerization of hex-3-yne and CO₂ at the (TMED)Ni(0)-fragment (TMED = N,N,N′,N′-tetramethylethylendiamine) is the formation of carbon monoxide and (TMED)Ni(CO₃). So it is possible to explain the generation of II (TMED)Ni(diethylmalicacidanhydride) and III (a nickel trimer with two (TMED)Ni(CO₃) units). Both complexes are characterized by X-ray analysis. The reduction of CO₂ to CO most likely proceeds via an intermediate in which two molecules of carbon dioxide are coupled head-to-tail to form a metallacycle. An ab initio scf geometry optimization supports the existence of such an intermediate.     

First 13C‐NMR Assignments of Betaxanthins

Due to their inherent liability towards highly acidic conditions previously considered to be a prerequisite for data acquisition, betaxanthin structure dereplication by NMR spectroscopy has been scarcely reported and was, hitherto, exclusively based on ¹H‐NMR data interpretation. Applying only slightly acidic conditions, we herein report the first ¹³C‐NMR data of two betaxanthins, i.e., indicaxanthin ( 1 ), isolated from yellow‐orange cactus pear fruits (Opuntia ficus‐indica [L.] Mill . cv. ‘Gialla’), and of miraxanthin V ( 2 ) from yellow Swiss chard petioles (Beta vulgaris L. ssp. cicla [L.] Alef . cv. ‘Bright Lights’), as derived by gHSQC‐ and gHMQC‐NMR experiments and inverse detection.     

Separation and quantification of inulin in selected artichoke (Cynara scolymus L.) cultivars and dandelion (Taraxacum officinale WEB. ex WIGG.) roots by high-performance anion exchange chromatography with pulsed amperometric detection

The profile of fructooligosaccharides and fructopolysaccharides in artichoke heads and dandelion roots was investigated. For this purpose, a suitable method for high-performance anion exchange chromatography with pulsed amperometic detection was developed. The separation of monomers, oligomers and polymers up to a chain length of 79 sugar residues was achieved in one single run. Glucose, fructose, sucrose and individual fructooligosaccharides (kestose, nystose, fructofuranosylnystose) were quantified in six different artichoke cultivars and in dandelion roots. The contents ranged from 12.9 g/kg DM to 71.7 g/kg DM for glucose, from 15.8 g/kg DM to 67.2 g/kg DM for fructose, and from 16.8 g/kg DM to 55.2 g/kg DM for sucrose in the artichoke heads. Kestose was the predominant fructooligosaccharide, followed by nystose and fructofuranosylnystose. In four cultivars fructofuranosylnystose was only detectable in traces and reached its maximum value of 3.6 g/kg DM in the cultivar Le Castel. Furthermore, an average degree of polymerization of 5.3 to 16.7 was calculated for the individual artichoke cultivars, which is noticeably lower than hitherto reported. In contrast, the contents of kestose, nystose and fructofuranosylnystose in dandelion root exceeded that of artichoke, reflecting the short chain characteristic of the inulin, which was confirmed by chromatographic analysis.     

Molecular structure and fracture properties of ZrO<Subscript>X</Subscript>/Epoxysilane hybrid films

The mechanical reliability of hybrid films depends critically on their fracture properties which are controlled largely by the film composition and molecular structure. We have investigated the adhesive and cohesive fracture properties of hybrid films processed from 3-glycidoxypropyltrimethoxysilane (GPTMS) and tetra n-propoxyzirconium (TPOZ), for which the roles of molecular structure and composition have not been well established. The influences of film Zr/GPTMS ratio, silane crosslinking, and substrate composition on fracture resistance were quantified in terms of the critical strain energy release rate, G_C Film fracture energy was found to increase, then decrease with increasing Zr/GPTMS ratio. Removal of the epoxy rings of GPTMS from the film was found to drastically decrease the cohesive fracture energy of the film as well as the adhesive fracture energy of the film/epoxy interface. Finally, films deposited on silicon had much higher fracture energies compared to those deposited onto aluminum and titanium from identical sols. FTIR, XPS, and AFM were used to characterize the film structure and fracture surfaces. The molecular-scale mechanisms responsible for the observed trends are discussed. These results provide new insights into the interaction between the substrate chemistry, molecular structure, and mechanical reliability of hybrid sol-gel films.     

Paracyclophanes as model compounds for strongly interacting π-systems. Part 2: mono-hydroxy[2.2]paracyclophane

The structure of the electronic ground- and first excited state of mono-hydroxy [2.2]paracyclophane (MHPC) and the S(1)← S(0) electronic transition have been investigated by resonance-enhanced multiphoton ionisation (REMPI) and by quantum chemical spin-component-scaled-approximate coupled cluster second order (SCS-CC2) computations. The origin of the S(1)← S(0) transition was located at 30,772 cm(-1) (3.815 eV) in the REMPI spectrum. The value has to be compared with a computed excitation energy of 3.79 eV. The vibrational structure of the spectrum confirms a significant geometry change upon excitation along the coordinates corresponding to twist- and shift-motions in the molecule. It gives rise to an experimentally observed progression with a fundamental of +30 cm(-1) and an inverse anharmonicity. From the experimental data a shallow potential along the twist coordinate was derived for the S(1) state. For the shift vibration a wavenumber of +91 cm(-1) was observed, while +85 cm(-1) was computed. The ionisation energy of MHPC was determined to be 7.63 ± 0.05 eV using synchrotron radiation. When compared to earlier results on the parent compound [2.2]paracyclophane and pseudo-ortho-dihydroxy[2.2]paracyclophane it can be seen that already small variations in the substitution pattern have a significant impact on the shapes of the involved potential energy surfaces leading to strong variations in ground and excited state geometries and opto-electronic properties governing the exciton transfer processes.     

Biocatalytic deuterium- and hydrogen-transfer using over-expressed ADH-'A': enhanced stereoselectivity and 2H-labeled chiral alcohols

Employing the over-expressed highly organic solvent tolerant alcohol dehydrogenase ADH-'A' from Rhodococcus ruber DSM 44541, versatile building blocks, which were not accessible by the wild type catalyst, were obtained in > 99% e.e.; furthermore, employing d8-2-propanol as deuterium source, stereoselective biocatalytic deuterium transfer was made feasible to furnish enantiopure deuterium labeled sec-alcohols on a preparative scale employing a single enzyme.