Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Effect of titanium dioxide on photostability of solid-state mequitazine

TiO(2) has been widely used in pharmaceutical products, and it also has been used as a photocatalyst. In this study, the influence of photocatalytic activity on the stability of solid-state mequitazine, an H(1)-blocker, was investigated. The photo-degradation of mequitazine with TiO(2) occurred under irradiation with both light sources. The degree of degradation of mequitazine with anatase was higher than that of rutile. The degradation was significantly enhanced with increasing relative humidity. The relationship between the apparent degradation rate constant and water vapor pressure could be clearly described by a simple power law. The major photo-degradation products of mequitazine, resulting from photocatalytic activity of TiO(2), were mequitazine-S-oxide and mequitazine-sulphone. A remarkable degradation of mequitadine occurred with addition of TiO(2), and its photocatalytic activity was controlled by water vapor pressure. The photo-degradation of mequitazine with TiO(2) is a different process from mequitazine without TiO(2), because mequitazine-S-oxide and mequitazine-sulphone are not formed with normal photo-degradation of mequitazine.     

Secondary hypervalent I(III)...O interactions: synthesis and structure of hypervalent complexes of diphenyl-lambda3-iodanes with 18-crown-6

Reported here for the first time are the synthesis and characterization of supramolecular complexes between diaryl-lambda(3)-iodanes and 18-crown-6 (18C6). Slow evaporation of solvents afforded 1:1 and 2:1 complexes between Ph(2)IBF(4) and 18C6 as stable crystals, depending on the conditions. X-ray crystal structures of these complexes indicated that each iodine atom contacts with the three adjacent oxygen atoms of 18C6 through two hypervalent secondary bonding and a weak interaction. (1)H NMR analyses and CSI-MS spectra showed that, in dichloromethane solution, Ph(2)IBF(4) exclusively forms the 1:1 complex with 18C6 (binding constant K(a), 1.02 x 10(3) M(-)(1)). The binding constants decrease with the increased solvent donor ability (Gutmann's DN). Changing the heteroatom ligand from BF(4) to the less nucleophilic PF(6) and AsF(6) increased the binding constant by about six times. Substitution of an electron-withdrawing group onto the para position of Ph(2)IBF(4) tends to increase in the complex stability. A linear Hammett relationship (rho = 0.59) between log K(a) and sigma(p)(+) values of substituents indicates that the diaryl-lambda(3)-iodanes with electropositive iodine(III) interact more efficiently with 18C6. Decreased binding magnitude was measured with 15C5, dibenzo-18C6, dibenzo-21C7, and dibenzo-30C10.     

Phase separation of poly(γ-benzyl L-glutamate) to liquid crystal and isotropic solution in various helicogenic solvents

Solvent effects on the phase separation of poly(-benzyl L-glutamate) to liquid crystal and isotropic solution have been observed in various helicogenic solvents. The temperature-composition phase diagrams have been determined for each solution. The critical concentrations, ₂ ^* , at which the phase separation occours have been compared in various solvents. In dimethylformamide in which the polymer is molecularly dispersed, the observed ₂ ^* value has agreed with that calculated by Flory's theory. In some solvents in which the polymer aggregates in a head-to-tail mode such as chloroform, the observed ₂ ^* values have been considerably small. It is assumed that the polymer aggregates behave as longer particles than the original particles. In dioxane in which the polymer aggregates highly both in a head-to-tail and a side-by-side modes, the ₂ ^* value has been a little larger than that in chloroform. In this case the relationship between the aggregation and the liquid crystal formation is so complicated that further investigation is necessary. In aromatic solvents such asm-cresol that dissolves the polymer almost molecularly, the ₂ ^* is smaller than that in dimethylformamide. Therefore, the intermolecular interactions between the phenyl groups in the side groups of the polymer and those in solvent molecules must be considered.The author is grateful to Mr. K. Sano and Mr. M. Watanabe for their observation of the liquid crystal formation.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Synthesis of acryloyl-type polymer fixing 5-fluorouracil residues through D-glucofuranoses and its antitumor activity

Acryloyl-type polymer fixing 1-β-carbonylethyl-5-fluorouracil residues through D -glucofuranoses via ester bonds was synthesized by means of polymerization of the corresponding monomer and polymer reaction. In order to provide the water-soluble objective polymer, the copolymerization of the acryloyl-type monomer with acrylamide was carried out. The extent of release of 5-FU residues from the copolymer was investigated in the enzyme or nonenzyme system in vitro. Furthermore, the antitumor activities of the water-insoluble homopolymer and water-soluble copolymer obtained were tested in vivo.     

THE CONFORMATIONAL ANALYSIS AND PHOTOISOMERIZATION OF RETINOCHROME ANALOGS WITH POLYENALS

Abstract— 3, 7-Dimethyl-2, 4, 6, 8, 10-dodecapentaenal was synthesized for reconstitution of the retinochrome analog. Its opsin shift was 1000 cm ¹ smaller than that of native retinochrome, whose chromophore contains the same number of double bonds. The conformational change from 6-s-trans to 6-s-cis , as figured in a retinal molecule, plays an important role in the formation of the retinochrome analog, based on the estimation of opsin shifts for retinal analogs locked in the 6-s conformation. Thus the conformation of the 6–7 single bond in the native retinochrome was suggested to be 6 -cis . Analysis of the circular dichroic spectra of retinochrome analogs revealed that the 6-s conformation is independent of the appearance of the β-band. The stereoselectivity in the photoisomerization of the retinal analogs by a retinochrome template depends on the hydrophobic binding in the region of the β-ionone ring.     

Synthesis of spirodienones by intramolecular ipso-cyclization of N-methoxy-(4-halogenophenyl)amides using [hydroxy(tosyloxy)iodo]benzene in trifluoroethanol

Spirodienones bearing the 1-azaspiro[4.5]decane ring system have been synthesized from N-methoxy-(4-halogenophenyl)amides by the intramolecular ipso attack of a nitrenium ion generated with [hydroxy(tosyloxy)iodo]benzene in trifluoroethanol.     

Preparation and properties of molybdenum and tungsten dinitrogen complexes : `XVI. Electrochemical properties of tungsten and molybdenum diazoalkane complexes

Diazoalkane complexes of type [MF(NNCRR′)(dpe)₂][BF₄] (M = Mo or W; dpe = Ph₂PCH₂CH₂PPh₂), which are easily derived from bis(dinitrogen) complexes [M(N₂)₂(dpe)₂], undergo consecutive one- and two-electron oxidations and reductions under voltammetric conditions at a platinum electrode. The ESR spectra of the species generated by the controlled potential electrolysis show that primary oxidation occurred on the metal atom (M = Mo) and reduction on the two nitrogen atoms in the diazoalkane ligands (M = Mo or W).     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.