Influence of water in the lamellar rearrangement of internal wool lipids

Small angle X-ray scattering (SAXS) was applied to a new lipid model arrangement, which was achieved by concentrating or diluting internal wool lipid liposome suspensions in varying water concentrations. The influence of the water content in the lamellar structure of the internal wool lipids is compared with the lamellar structure of phosphatidylcholine bilayers present in the membranes of the living cells. The high increase in the lamellar distances with the water content indicates that large amounts of water can be retained in the lipid wool membrane in contrast to the case of phosphatidylcholine liposomes. A transition temperature between 40 and 50 degrees C tends to eliminate the ordered lamellar structure when more than 60% of water is present in the bilayer structure. This could account for the increase in the permeability of the wool fibres when these are soaked in water at temperatures exceeding 40 degrees C.     

Water-soluble carbosilane dendrimers: synthesis biocompatibility and complexation with oligonucleotides; evaluation for medical applications

Novel amine- or ammonium-terminated carbosilane dendrimers of type nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe2)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe2}]x and nG-[Si{(CH2)3NH2}]x or nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe3 +I-)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe3 +I-}]x, and nG-[Si{(CH2)3NH3 +Cl-}]x have been synthesized and characterized up to the third generation by two strategies: 1) alcoholysis of Si--Cl bonds with amino alcohols and subsequent quaternization with MeI, and 2) hydrosilylation of allylamine with Si--H bonds of the dendritic systems and subsequent quaternization with HCl. Quaternized carbosilane dendrimers are soluble in water, although degradation is apparent due to hydrolysis of Si--O bonds. However, dendrimers containing Si--C bonds are water-stable. The biocompatibility of the second-generation dendrimers in primary cell cultures of peripheral blood mononuclear cells (PBMCs) and erythrocytes have been analyzed, and they show good toxicity profiles over extended periods. In addition, we describe a study on the interactions between the different carbosilane dendrimers and DNA oligodeoxynucleotides (ODNs) and plasmids along with a comparative analysis of their toxicity. They can form complexes with DNA ODNs and plasmids at biocompatible doses via electrostatic interaction. Also a preliminary transfection assay has been accomplished. These results demonstrate that the new ammonium-terminated carbosilane dendrimers are good base molecules to be considered for biomedical applications.     

Aromaticity in linear polyacenes: generalized population analysis and molecular quantum similarity approach

The relative aromaticity of benzenoid rings in the linear polyacenes is investigated using two novel aromaticity approaches. According to the first, the aromaticity of individual benzene rings was gauged by the values of six-center bond indices (SCI) calculated within the so-called Generalized Population Analysis (GPA). In the second approach, the same goal is addressed using the theory of Molecular Quantum Similarity (MQS). Both independent approaches are found to correlate very well, and both point toward decreasing aromaticity in any linear polyacenes upon going from the outer to inner rings.     

Use of new generation poly(styrene-divinylbenzene) resins for gas-phase trapping-thermal desorption. Application to the retention of seven volatile organic compounds

Two new generation polymeric resins, Bond Elut ENV (styrene-divinylbenzene) from Varian and LiChrolut EN (ethylvinylbenzene-divinylbenzene) from Merck, commonly used in liquid--solid-phase extraction (SPE) were evaluated as sorbents for gas-phase sampling followed by thermal desorption and compared to Tenax TA, a reference sorbent in this kind of applications. The three resins were tested against seven volatile organic compounds (VOCs): 1-octene, ethylbenzene, (p-, m-, o-)xylenes, styrene and 1,4-dichlorobenzene. Elution curves for all compounds were determined at temperatures from 120 to 180 degrees C, and from such curves, different parameters, such as retention factor (k), distribution coefficient (K), height equivalent to a theoretical plate (H), asymmetry factor (Fa) and breakthrough volume (VB) were calculated and extrapolated at room (25 degrees C) and desorption (220 degrees C) temperatures in order to estimate breakthrough and elution volumes. In average, retention in LiChrolut EN is 10 and 200 times stronger than in Bond Elut ENV and Tenax TA, respectively, but its chromatographic behavior is rather poor giving quite asymmetric elution profiles (Fa >1.8 at 120 degrees C). Bond Elut ENV exhibited the best chromatographic behavior, with H values two or five times lower than those of LiChrolut EN or Tenax TA. An additional advantage of the new sorbents is that retention decreases with T much faster than it does in Tenax (8 or 20 times for Bond Elut ENV or LiChrolut EN). Modeling has finally shown that beds with 60-80 (for Bond Elut ENV) or 300-400 (for LiChrolut EN) times less of sorbent have the same retention properties than standard Tenax TA tubes and similar (LiChrolut EN) or five to six times smaller (Bond Elut ENV) elution volumes. These predictions have been experimentally confirmed.     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

Stopped-flow injection analysis. The influence of diffusion on dispersion of normal and reverse flow injection

A relationship is derived to enable the comparison of the dispersion heights of normal and reverse flow injection analysis (FIA). A single channel flow system is employed in the absence of a chemical reaction. The stopped-flow injection method is used to probe the influence of molecular diffusion on the overall dispersion of normal and reverse FIA, which appeared to demonstrate fundamentally different diffusion behaviors. Small discrepancies are observed between the dispersion heights, which are enhanced by the stopped-flow period, especially when unmatched matrix ionic compositions of the indicator and counter solutions were involved. For these conditions, the diffusion flux rate is enhanced considerably, displaying a peak, in addition to the transient, for both methods. The influence of diffusion on the dispersion characteristics of normal and reverse FIA is discussed theoretically. Diffusion in the proposed model is postulated to oppose dispersion by convection. The latter initiates concentration gradients in the injection zone and propagates it with flow time over the dispersion zone profile. The diffusion flux then reacts in order to confine the indicator dispersion for normal FIA and to enhance it for reverse FIA. This model is consistent with the experimental results and accounts for most of the phenomena encountered. Probably owing to the influence of secondary flow phenomena, the use of coiled tubes has suppressed the effects of diffusion on the overall dispersion behavior.Part of the experimental work was performed at IMI Institute for Research and Development, Haifa, Israel.     

Inclusion by a fluorenyl diol host with substituted pyridines

The structures of the inclusion compounds formed by the host 9,9’-(ethyne-1,2-diyl)bis(fluoren-9-01) with pyridine and picolines are similar and display tubular topology. The host discriminates poorly between these guests. The kinetics of desorption of the pyridine compound is governed by the Avrami-Erofe’ev equation A2, with an activation energy of 111(7) kJ mol⁻¹.     

Water-soluble carbosilane dendrimers protect phosphorothioate oligonucleotides from binding to serum proteins

Treatment of dendriplexes formed between water-soluble carbosilane dendrimers and phosphorothioate oligodeoxynucleotides (ODN) with the anionic detergent sodium dodecyl sulfate disrupted the complexes indicating that the nature of the union in such dendriplexes is merely electrostatic. However, dendriplexes were not dissociated by serum proteins like bovine or human serum albumins, as assessed by gel electrophoresis and fluorescence experiments. This would imply a dendrimer-mediated protective effect able to prevent ODN interactions with serum proteins and additionally could translate into a reduction of the ODN doses needed to achieve the biological effects. The employment of carbosilane dendrimers as carriers may solve the problem of ODN kidnapping by plasmatic proteins as a key drawback for therapeutics involving ODNs. As examples, transfection processes on normal primary peripheral blood cells and diagnosis of HIV infection in the presence of serum have been assayed.     

SERS detection of environmental pollutants in humic acid-gold nanoparticle composite materials

Humic acid (HA) solutions provide an unexpected medium for direct fabrication of gold nanoparticles (HA-AuNP) and a clear window for surface-enhanced Raman scattering (SERS) with many potential applications in the ultrasensitive chemical analysis of environmental pollutants. It is demonstrated that the HA-AuNP fabrication can be easily achieved in a wide range of pH (2 to 12). The background SERS spectra of HA is relatively weak in absolute intensity, allowing the detection of the enhanced Raman signal from trace amount of contaminants. An in-situ approach is illustrated where the HA-AuNP fabrication is carried out with a HA solution containing the target pollutant. The technique may allow for the direct detection of organic pollutants present in the humic fraction of soil.     

Capillary electrophoresis–electrospray mass spectrometry and HR–ICP–MS for the detection and quantification of 10B-boronophenylalanine (10B–BPA) used in boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a bimodal radiotherapeutic treatment based on the irradiation of neoplastic tissues with neutrons after the tissues have selectively accumulated molecules loaded with nuclides with large neutron capture cross-sections (such boron-10). Boron-10 carriers have been tested to a limited extent, and clinical trials have been conducted on sulfhydryl borane (¹⁰B-BSH) and boronophenylalanine (¹⁰B-BPA). However, precise and accurate measurements of boron-10 concentrations (0.1–100 μg/g) in specimens and samples of limited size (μg scale) are needed in order to be able to biologically characterise new compounds in predictive tissue dosimetry, toxicology and pharmacology studies as well as in clinical investigations. A new approach based on fast separation and detection of ¹⁰B-BPA performed by coupling capillary electrophoresis to electrospray mass spectrometry is reported. This method allows the quantitative analysis and characterisation of ¹⁰B-BPA in a short time with a high separation efficiency. Detection limits of 3 μM for ¹⁰B-BPA and 30 ng/mL for ¹⁰B were obtained with CE–ESI–MS. A quantification limit of 10 μM for ¹⁰B-BPA (100 ng/mL for ¹⁰B) was attained. The total boron-10 concentration was determined by high-resolution inductively coupled mass spectrometry in order to validate the method. Boron-10 isotope measurements were carried out by HR–ICP–MS at medium resolution (R=4000) due to the presence of an isobaric interference at mass 10. Good agreement was obtained between the values from CE–ESI–MS and those from HR–ICP–MS. The method has been successfully used to determine the ¹⁰B-BPA in two lines of cultured cells.