Spectrophotometric determination of dopamine in pharmaceutical formulations

A new spectrophotometric method was developed for the estimation of dopamine. The method is based on the bromination of the dopamine with a solution of excess brominating mixture. After bromination, the excess brominating mixture is treated with potassium iodide to produce a yellow solution. The absorbance of yellow solution was measured at 350 nm on a Spectronic 1001 spectrophotometer against distilled water as a blank.From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 3, 2005, pp. 2842285.Original English Text Copyright © 2005 by Rami Reddy, Sreedevi, Prabhavathi, Chakravarthy.This article was submitted by the authors in English.     

Palladium–dppb–borate‐catalyzed regioselective synthesis of cinnamate esters by alkoxycarbonylation of phenylacetylene

The regioselective alkoxycarbonylation of phenylacetylene into various cinnamate esters was achieved with a catalyst system formed from palladium (II), 1,4‐bis(diphenylphosphino) butane (dppb) and salicylborate complex in acetonitrile as a solvent. The influence of various parameters on the overall conversion of phenylacetylene and the selectivity of the reaction were studied systematically by varying the type of palladium complex, acids promoter, CO pressure, temperature and the reaction time. This investigation allowed us to obtain the predominant formation of cinnamate esters with excellent selectivity (90–96%). Copyright © 2008 John Wiley & Sons, Ltd.     

Microbial genotoxicity bioreporters based on <Emphasis Type="Italic">sulA</Emphasis> activation

A bacterial genotoxicity reporter strain was constructed in which the tightly controlled strong promoter of the Escherichia coli SOS response gene sulA was fused to the alkaline phosphatase-coding phoA reporter gene. The bioreporter responded in a dose-dependent manner to three model DNA-damaging agents—hydrogen peroxide, nalidixic acid (NA), and mitomycin C (MMC)—detected 30–60 min after exposure. Detection thresholds were 0.15 μM for MMC, 7.5 μM for nalidixic acid, and approximately 50 μM for hydrogen peroxide. A similar response to NA was observed when the bioreporter was integrated into a specially designed, portable electrochemical detection platform. Reporter sensitivity was further enhanced by single and double knockout mutations that enhanced cell membrane permeability (rfaE) and inhibited DNA damage repair mechanisms (umuD, uvrA). The rfaE mutants displayed a five- and tenfold increase in sensitivity to MMC and NA, respectively, while the uvrA mutation was advantageous in the detection of hydrogen peroxide. A similar sensitivity was displayed by the double rfaE/uvrA mutant when challenged with the pre-genotoxic agents 2-amino-3-methylimidazo[4,5-f]quinoline and 2-aminoanthracene following metabolic activation with an S9 mammalian liver fraction.     

Synthesis,In Vitro Anti-Microbial Analysis and Molecular Docking Study of Aliphatic Hydrazide-Based Benzene Sulphonamide Derivatives as Potent Inhibitors of α-Glucosidase and Urease

A unique series of sulphonamide derivatives was attempted to be synthesized in this study using a new and effective method. All of the synthesized compounds were verified using several spectroscopic methods, including FTIR, ¹H-NMR, ¹³C-NMR, and HREI-MS, and their binding interactions were studied using molecular docking. The enzymes urease and α-glucosidase were evaluated against each derivative (1–15). When compared to their respective standard drug such as acarbose and thiourea, almost all compounds were shown to have excellent activity. Among the screened series, analogs 5 (IC₅₀ = 3.20 ± 0.40 and 2.10 ± 0.10 µM) and 6 (IC₅₀ = 2.50 ± 0.40 and 5.30 ± 0.20 µM), emerged as potent molecules when compared to the standard drugs acarbose (IC₅₀ = 8.24 ± 0.08 µM) and urease (IC₅₀ = 7.80 ± 0.30). Moreover, an anti-microbial study also demonstrated that analogs 5 and 6 were found with minimum inhibitory concentrations (MICs) in the presence of standard drugs streptomycin and terinafine.     

HYSCORE analysis of nitrogen hyperfine interactions

A semiquantitative treatment of hyperfine sublevel correlation spectra of aS=1/2,I=1 spin system is presented. The derived closed analytical expressions allow the determination of components of the dipolar and quadrupolar coupling tensors. The method is applicable if nonsecular terms can be neglected and if canonical orientations of the hyperfine interactions can be selected via a dominantg matrix or hyperfine anisotropy.     

Fictitious domain methods for two‐phase flow energy balance computations in nuclear components

This paper is dedicated to the numerical simulation of nuclear components (cores and steam generators) by fictitious domain methods. The fictitious domain approach consists in immersing the physical domain under study in a Cartesian domain, called the fictitious domain, and in performing the numerical resolution on this fictitious domain. The calculation times are then efficiently reduced by the use of fast solvers. In counterpart, one has to handle with an immersed boundary, generally non‐aligned with the Cartesian mesh, which can be non‐trivial. The two fictitious domain methods compared here on industrial simulations and developed by Ramière et al. deal with an approximate immersed interface directly derived from the uniform Cartesian mesh. All the usual immersed boundary conditions (Dirichlet, Robin, Neumann), possibly mixed, are handled through a unique formulation of the fictitious problem. This kind of approximation leads to first‐order methods in space that exhibit a good ratio of the precision of the approximate solution over the CPU time, which is very important for industrial simulations. After a brief recall of the fictitious domain method with spread interface (Ramière et al., CMAME 2007) and the fictitious domain method with immersed jumps (Ramière et al., JCP 2008), we will focus on the numerical results provided by these methods applied to the energy balance equation in a steam generator. The advantages and drawbacks of each method will be pointed out. Generally speaking, the two methods confirm their very good efficiency in terms of precision, convergence, and calculation time in an industrial context. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of circular hole expansion with generalized yield criteria

Expansion of a circular hole, embedded in an infinite elastoplastic sheet, is studied within the framework of large strain plane-stress plasticity. Material response is modeled by deformation type theories with two families of generalized isotropic yield criteria. Two distinct problems are examined in detail: hole enlargement under internal pressure and hole expansion under remote tension. Strain hardening and elastic compressibility are fully accounted for.Numerical illustrations reveal constitutive sensitivity of stress and deformation profiles. For the internally pressurized hole the specific power needed to create a new volume unit reaches an asymptotic level practically independent of yield criteria. The specific cavitation power is used to derive a simple relation for the ballistic limit in quasi-static plate perforation, showing good agreement with experimental results. Under remote tension the hole expands spontaneously when external stress approaches a limit which is found to be highly sensitive to the yield criteria.     

Calculation of relative binding affinities of fructose 1,6-bisphosphatase mutants with adenosine monophosphate using free energy perturbation method

The free energy perturbation (FEP) methodology is the most accurate means of estimating relative binding affinities between inhibitors and protein variants. In this article, the importance of hydrophobic and hydrophilic residues to the binding of adenosine monophosphate (AMP) to the fructose 1,6-bisphosphatase (FBPase), a target enzyme for type-II diabetes, was examined by FEP method. Five mutations were made to the FBPase enzyme with AMP inhibitor bound: 113Tyr --> 113Phe, 31Thr --> 31Ala, 31Thr --> 31Ser, 177Met --> 177Ala, and 30Leu --> 30Phe. These mutations test the strength of hydrogen bonds and van der Waals interactions between the ligand and enzyme. The calculated relative free energies indicated that: 113Tyr and 31Thr play an important role, each via two hydrogen bonds affecting the binding affinity of inhibitor AMP to FBPase, and any changes in these hydrogen bonds due to mutations on the protein will have significant effect on the binding affinity of AMP to FBPase, consistent to experimental results. Also, the free energy calculations clearly show that the hydrophilic interactions are more important than the hydrophobic interactions of the binding pocket of FBPase.     

Discovery of potent and specific fructose-1,6-bisphosphatase inhibitors and a series of orally-bioavailable phosphoramidase-sensitive prodrugs for the treatment of type 2 diabetes

Excessive glucose production by the liver coupled with decreased glucose uptake and metabolism by muscle, fat, and liver results in chronically elevated blood glucose levels in patients with type 2 diabetes. Efforts to treat diabetes by reducing glucose production have largely focused on the gluconeogenesis pathway and rate-limiting enzymes within this pathway such as fructose-1,6-bisphosphatase (FBPase). The first potent FBPase inhibitors were identified using a structure-guided drug design strategy (Erion, M. D.; et al. J. Am. Chem. Soc. 2007, 129, 15480-15490) but proved difficult to deliver orally. Herein, we report the synthesis and characterization of a series of orally bioavailable FBPase inhibitors identified following the combined discoveries of a low molecular weight inhibitor series with increased potency and a phosphonate prodrug class suitable for their oral delivery. The lead inhibitor, 10A, was designed with the aid of X-ray crystallography and molecular modeling to bind to the allosteric AMP binding site of FBPase. High potency (IC50 = 16 nM) and FBPase specificity were achieved by linking a 2-aminothiazole with a phosphonic acid. Free-energy perturbation calculations provided insight into the factors that contributed to the high binding affinity. 10A and standard phosphonate prodrugs of 10A exhibited poor oral bioavailability (0.2-11%). Improved oral bioavailability (22-47%) was achieved using phosphonate diamides that convert to the corresponding phosphonic acid by sequential action of an esterase and a phosphoramidase. Oral administration of the lead prodrug, MB06322 (30, CS-917), to Zucker Diabetic Fatty rats led to dose-dependent inhibition of gluconeogenesis and endogenous glucose production and consequently to significant blood glucose reduction.