Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Three Bis‐BODIPY Analogous Diruthenium Redox Series: Characterization and Electronic Structure Analysis

The dianion derived from (2Z,6Z)‐3,7‐diphenyl‐N2,N6‐di(pyridin‐2‐yl)pyrrolo[2,3‐f]indole‐2,6(1H,5H)‐diimine (H₂BL), a modified BODIPY ligand precursor, is shown to be capable of bridging two metal complex fragments RuL₂, L=2,4‐pentanedionato (acac^?), 2,2’‐bipyridine (bpy) or 2‐phenylazopyridine (pap) in [Ru(acac)₂Ru(μ‐BL)Ru(acac)₂] ( 1 / 2 ), [Ru(bpy)₂Ru(μ‐BL)Ru(bpy)₂](ClO₄)₂ ([ 3 ](ClO₄)₂) and [Ru(pap)₂Ru(μ‐BL)Ru(pap)₂](ClO₄)₂ ([ 4 ](ClO₄)₂). The compounds, including a diastereoisomeric pair 1 (meso) and 2 (rac) were spectroscopically and structurally characterized. Reversible electron transfers as revealed by cyclic and differential pulse voltammetry allowed for an EPR and UV‐vis‐NIR spectroelectrochemical investigation of several neighboring charge states. Together with susceptibility measurements and TD‐DFT calculations the assignment of oxidation states reveals that 1 , 2 are diruthenium(III) species which can be oxidized or reduced by one electron whereas 3 ²⁺ and 4 ²⁺ contain ruthenium(II) and get reduced or oxidized mainly at the dianionic bridge ( 3 ²⁺) or are reduced at the ancillary ligands pap ( 4 ²⁺).     

Study of COVID-19 epidemiological evolution in India with a multi-wave SIR model

Nonlinear Dynamics - The global pandemic due to the outbreak of COVID-19 ravages the whole world for more than two years in which all the countries are suffering a lot since December 2019. In this...     

The integrable Boussinesq equation and it’s breather,lump and soliton solutions

The fourth-order nonlinear Boussinesq water wave equation, which explains the propagation of long waves in shallow water, is explored in this article. We used the Lie symmetry approach to analyze the Lie symmetries and vector fields. Then, by using similarity variables, we obtained the symmetry reductions and soliton wave solutions. In addition, the Kudryashov method and its modification are used to explore the bright and singular solitons while the Hirota bilinear method is effectively used to obtain a form of breather and lump wave solutions. The physical explanation of the extracted solutions was shown with the free choice of different parameters by depicting some 2-D, 3-D, and their corresponding contour plots.

     

Synthesis and aggregational behavior of acidic proteinoid

Polypeptide-based acidic proteinoid containing L -glutamic acid and L -aspartic acid in excess and five other neutral and basic amino acids in minor proportions have been synthesized and found that it forms organized aggregates in an aqueous solution. The proteinoid aggregate has been characterized using ¹³C-NMR, IR, and fluorescence spectroscopic techniques. The c.m.c. of the proteinoid has been determined by conductometric and pH metric methods. The aggregation studies were carried out at different temperatures and varying ionic strengths of the medium. The phase transition of the proteinoid aggregate has been determined using the fluorescence absorbance method. The aggregation behavior is shown to be dependent on the pH of the solution. This was also supported by conductivity measurements. Using methylene blue as a model drug, the drug delivery property of the proteinoid micelles were studied in acidic (pH 4.5) and neutral (pH 7.4) mediums. Using biphasic model thermochemical parameters, ΔG, ΔH, ΔS, and ΔC_p have been evaluated. © 1996 John Wiley & Sons, Inc.     

Estimation of coefficient of variation in a weighted inverse Gaussian model

The coefficient of variation is an important parameter in many physical, biological and medical sciences. In this paper we study the estimation of the square of the coefficient of variation in a weighted inverse Gaussian model which is a mixture of the inverse Gaussian and the length biased inverse Gaussian distribution. This represents a rich family of distributions for different values of the mixing parameter and can be used for modelling various life testing situations. The maximum likelihood as well as the Bayes estimates of the parameters are obtained. These estimates are used to derive the estimates of the square of the coefficient of variation of the model under study. Several important data sets are analysed to illustrate the results. © 1996 John Wiley & Sons, Ltd.     

Design and synthesis of interpenetrating polymer networks for second-order nonlinear optics

There has been a tremendous recent interest in the development of second-order nonlinear optical (NLO) polymeric materials for photonic applications. However, a major drawback of second-order NLO polymers that prevents them from being used in device applications is the instability of their electric field induced dipolar alignment. The randomization of the dipole orientation leads to the decay of second-order optical nonlinearities. Numerous efforts have been made to increase the stability of the second-order NLO properties of polymers. The search for new approaches to develop NLO polymers with optimal properties has been an active research area since the past decade. A novel approach, combining the hybrid properties of high glass transition temperatures, extensively extensively crosslinked networks and permanent entanglements, based on interpenetrating polymer networks (IPN) is introduced to develop stable second-order NLO materials. Two types of IPN systems are prepared and their properties are investigated. The designing criteria and the rationale for the selection of polymers are discussed. The IPN samples show excellent temporal stability at elevated temperatures. Long-term stability of the optical nonlinearity at 100°C has been observed in these materials. Temporal stability of the NLO properties of these IPNs is synergistically enhanced. Relaxation behavior of the optical nonlinearity of an IPN system has been studied and compared with that of a typical guest/host system. The improved temporal stability of the second-order NLO properties of this IPN system is a result of the combination of the high rigidity of the polymer backbones, crosslinked matrices and permanent entanglements of the polymer networks. A slight modification of the chemical structure resulted in an improvement of the optical quality of the sample.     

Biochemical synthesis of water soluble polyanilines: Poly(p-aminobenzoic acid)

This report describes the synthesis of a water soluble polyaniline through a biochemical synthetic route. The oxidative free radical coupling mechanism for the synthesis of poly(p-aminobenzoic acid) is catalyzed by horseradish peroxidase in the presence of hydrogen peroxide. The resulting polymer is electrochemically active and undergoes reversible redox reactions. The polymer as synthesized is self doped and undergoes undoping in alkaline or ammonia solutions.     

Surface Interaction of Ionic Liquids: Stabilization of Polyethylene Terephthalate-Degrading Enzymes in Solution

The effect of aqueous solutions of selected ionic liquids solutions on Ideonella sakaiensis PETase with bis(2-hydroxyethyl) terephthalate (BHET) substrate were studied by means of molecular dynamics simulations in order to identify the possible effect of ionic liquids on the structure and dynamics of enzymatic Polyethylene terephthalate (PET) hydrolysis. The use of specific ionic liquids can potentially enhance the enzymatic hydrolyses of PET where these ionic liquids are known to partially dissolve PET. The aqueous solution of cholinium phosphate were found to have the smallest effect of the structure of PETase, and its interaction with (BHET) as substrate was comparable to that with the pure water. Thus, the cholinium phosphate was identified as possible candidate as ionic liquid co-solvent to study the enzymatic hydrolyses of PET.     

Effect of Electric Field on Dielectric Properties of SnO2 Sb2O3 and their Mixed Thin Films

Thin films of various thicknesses in the MIM structure have been prepared from the the powders of SnO₂, Sb₂O₃ and (SnO₂ + Sb₂O₃) of high purity by the thermal evaporation technique in a vacuum of 10⁻⁵ Torr. Dielectric properties of SnO₂, Sb₂O₃, and their mixed thin films have been studied with ac and dc electric fields and frequency. Capacitance and loss tangent are almost independent on dc voltage upto 1.0 V for SnO₂, 10.0 V for Sb₂O₃ and 2.5 V for mixed films. These capacitors become unstable at 1.0 V for SnO₂ films and 2.5 V for mixed films. For higher film thicknesses the decay in these films starts at higher voltages. Capacitance and loss tangent increases with applied ac voltage in SnO₂, Sb₂O₃, and their mixed films. A comparison of the capacitance values of SnO₂, Sb₂O₃, and their mixed films showed that the capacitance values are less in Sb₂O₃ as compared to SnO₂ films. In mixed films the capacitance is greater than the constituent films. These studies have shown that Sb₂O₃ films are found to be more stable compared to SnO₂ and their mixed films for ac and dc voltages. The results thus obtained on SnO₂, Sb₂O₃, and their films are presented and discussed.