Highly selective deblocking of propargyl carbonates in the presence of propargyl carbamates with tetrathiomolybdate

Propargyloxycarbonyl chloride, 1, has been used to protect the hydroxyl and amino functionalities of amino alcohols and aminophenols in one pot using triethylamine or pyridine as a base. The increased reactivity of benzyltriethylammonium tetrathiomolybdate, 2, toward propargyl carbonates over propargyl carbamates is studied in detail and has been exploited further to develop an orthogonal protection strategy for the hydroxyl and amino functionalities. For example, 2-amino-1-butanol, 6a, was treated with 1 to get the N,O-diPoc compound 7a in 90% yield, which when treated with 1.1 equiv of 2 at room temperature removes the Poc group attached to oxygen while leaving the one attached to nitrogen intact to yield compound 8a in 85% yield. This particular observation offers a new protecting strategy where an amine and an alcohol group can be protected simultaneously in one pot, and in a later synthetic step, if the alcohol group has to be deprotected selectively, it can be achieved with 1 equiv of 2.     

Structural and mechanistic studies on ion insertion into the molecular box {[CpCo(CN)3]4[Cp*Ru]4}

The molecular box [CpCo(CN)₃]₄[Cp*Ru]₄ (Co₄Ru₄) reacts readily with a variety of monocations to form M⊂Co₄Ru₄⁺ (M=K⁺, Cs⁺, Rb⁺). Ion competition experiments, monitored by ESI-MS, show that the molecular box binds the smaller K⁺ more rapidly than Cs⁺, but that thermodynamically Co₄Ru₄ prefers the larger ion. The rates of ion-insertion for K⁺ and Cs⁺ into Co₄Ru₄ were found to qualitatively follow second order kinetics with K⁺, 300 M⁻¹ s⁻¹ and Cs⁺, 36 M⁻¹ s⁻¹. The ratio k_K/k_Cs qualitatively matched the ESI-MS results from ion competition experiments. The rates of ion-insertion into Co₄Ru₄ were found to depend on the counter anions. In particular, RbBF₄ reacted with Co₄Ru₄ more slowly than did RbOTf. The slower rates allowed us to establish second order kinetics. ¹H NMR studies reveal that the Cp signal for Co₄Ru₄ is very sensitive to the presence of entering ions, e.g., Rb⁺, whereas the corresponding Cp signal for Rb⊂Co₄Ru₄⁺ was insensitive to the presence of Rb⁺. The molecular structures of [Co₄Ru₄] · 6MeCN, [K⊂Co₄Ru₄]BF₄ · 7MeCN, [Cs⊂Co₄Ru₄]BF₄ · 6MeCN and [Tl⊂Co₄Ru₄]BF₄ · 6MeCN, determined by X-ray diffraction, showed that although the compounds crystallized in the same space group I23, a correlation exists between the Ru-N/Co-C bond distances and the size of the interstitial ion.     

Template synthesis, spectroscopic studies and biological screening of macrocyclic complexes derived from thiocarbohydrazide and benzil

A novel series of complexes of the type [M(TML)X₂]; where TML is a tetradentate macrocyclic ligand; M = Co(II), Ni(II), Cu(II) or Zn(II); X = Cl⁻, CH₃COO⁻ or NO ₃ ⁻ have been synthesized by template condensation of benzil and thiocarbohydrazide in the presence of divalent metal salts in methanolic medium. The complexes have been characterized with the help of elemental analyses, conductance measurements, molecular weight determination, magnetic measurements, electronic, NMR, infrared and far infrared spectral studies. Electronic spectra along with magnetic moments suggest the six coordinate octahedral geometry for these complexes. The low value of molar conductance indicates them to be non-electrolytes. The biological activities of metal complexes have been tested in vitro against a number of pathogenic bacteria to assess their inhibiting potential.     

High-Performance Thin-Layer Chromatographic Determination of Itopride Hydrochloride in its Pharmaceutical Preparation and in the Bulk Drug

JPC – Journal of Planar Chromatography – Modern TLC - A normal-phase high-performance thin-layer chromatographic (HPTLC) method has been established for quantitative estimation of...     

Preconcentration of trace metals on Amberlite XAD-4 resin coated with dithiocarbamates and determination by inductively coupled plasma-atomic emission spectrometry in saline matrices

Preconcentration of Cd(II), Cu(II), Mn(II), Ni(II), Pb(II) and Zn(II) in saline matrices on Amberlite XAD-4 resins coated with ammonium pyrrolidine dithiocarbamate (APDC) and piperidine dithiocarbamate (pipDTC) and subsequent determination by inductively coupled plasma atomic emission spectrometry were studied. Parameters such as effect of pH, effect of HNO(3) concentration on elution of metals from resin were studied. The results show that Amberlite XAD-4 coated with APDC was more efficient in the recovery of metal ions compared with Amberlite XAD-4 coated with pipDTC, in the concentration range of 0.1-200 mug l(-1), for 1 g of Amberlite XAD-4 coated resin. The detection limits for Cd(II), Cu(II), Mn(II), Ni(II), Pb(II), Zn(II) are 0.1, 0.4, 0.3, 0.4, 0.6, 0.5 mug l(-1), respectively, for resin coated with APDC and 0.7, 1.0, 0.8, 0.9, 1.7 and 1.2 mug l(-1) for resin coated with pipDTC. The effect of diverse ions on the determination of aforesaid metals was studied. The method was applied for the determination of trace metal ions in artificial sea water and natural water samples. The results were compared with extraction AAS method.     

Efficient oxidizing methods for the synthesis of oxandrolone intermediates

Mild, efficient and eco-friendly oxidation of 17alpha-methylandrostan-3beta-17beta-diol (1) has been studied with three different reagents viz. pentavalent iodine reagent 2-iodoxy benzoic acid (IBX) in DMSO at 65 degrees C, sodium hypochlorite and H2O2/Na2WO4 under phase transfer conditions to give 17beta-hydroxy-17alpha-methylandrostan-3-one (mestanolone 2), a drug intermediate as oxidized product. The H2O2/Na2WO4/PTC gave mestanolone in high yield and purity whereas sodium hypochlorite/PTC system yielded some chlorinated material along with the mestanolone. However, 1 with 2.5 equivalent of IBX gave 17beta-hydroxy-17alpha-methyl-Delta1-androsten-3-one (3) under the similar reaction conditions in good yield and single step reaction.     

Physical noise model of a uniformly doped nanoscale FinFET photodetector

The noise mechanisms of a uniformly doped nanoscale FinFET photodetector including quantum mechanical effects is investigated theoretically. A numerical model has been developed for computation of different noise components in nanoscale FinFET. The drain current channel thermal noise under illuminated conditions is calculated. The noise parameters of the nanoscale FinFET equivalent circuit are strongly influenced by the incident optical signal and the quantum mechanical effects are found to play a major role in determining the overall noise performance of the device. It also reveals that the operating frequency can be adjusted suitably to make the noise behavior independent of the incident optical power. Other noise components such as Shot noise, thermal noise and diffusion noise have been calculated for the two port FinFET photodetector. Signal-to-noise ratio (SNR), Bit error rate (BER) and noise equivalent power (NEP) has also been calculated.     

Development and validation of LC‐MS/MS method for the estimation of β‐hydroxy‐β‐methylbutyrate in rat plasma and its application to pharmacokinetic studies

A simple, sensitive and specific high‐performance liquid chromatography mass spectrometry (LC‐MS/MS) method was developed and validated for the quantification of β‐hydroxy‐β‐methyl butyrate (HMB) in small volumes of rat plasma using warfarin as an internal standard (IS). The API‐4000 LC‐MS/MS was operated under the multiple reaction‐monitoring mode using the electrospray ionization technique. A simple liquid–liquid extraction process was used to extract HMB and IS from rat plasma. The total run time was 3 min and the elution of HMB and IS occurred at 1.48 and 1.75 min respectively; this was achieved with a mobile phase consisting of 0.1% formic acid in a water–acetonitrile mixture (15:85, v/v) at a flow rate of 1.0 mL/min on a Agilent Eclipse XDB C₈ (150 × 4.6, 5 µm) column. The developed method was validated in rat plasma with a lower limit of quantitation of 30.0 ng/mL for HMB. A linear response function was established for the range of concentrations 30–4600 ng/mL (r > 0.998) for HMB. The intra‐ and inter‐day precision values for HMB were acceptable as per Food and Drug Administration guidelines. HMB was stable in the battery of stability studies, viz. bench‐top, autosampler freeze–thaw cycles and long‐term stability for 30 days in plasma. The developed assay method was applied to a bioavailability study in rats. Copyright © 2012 John Wiley & Sons, Ltd.     

An enhanced performance of hybrid supercapacitor based on polyaniline-manganese phosphate binary composite

Journal of Solid State Electrochemistry - Manganese phosphate (Mn3(PO4)2) particles decorated polyaniline (PANI) have been proposed as a promising electrode material for supercapacitors. Mn3(PO4)2...     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012