Mechanical strength of amorphous CaCO3 colloidal spheres

Amorphous glassy CaCO3 colloidal spheres of monomodal size distribution were studied by high-resolution Brillouin light scattering. The Young modulus of 37 GPa and shear modulus of 14 GPa of glassy CaCO3 at a density of 1.9 g/cm3 were extracted from the particle vibration frequencies by employing acoustic wave scattering cross-section calculations. The line shape of the low-frequency modes is a sensitive index of the particle polydispersity.     

High charge-carrier mobility in pi-deficient discotic mesogens: design and structure-property relationship

Hexaazatrinaphthylene (HATNA) derivatives with six alkylsulfanyl chains of different length (hexyl, octyl, decyl and dodecyl) have been designed to obtain new potential electron-carrier materials. The electron-deficient nature of these compounds has been demonstrated by cyclic voltammetry. Their thermotropic behaviour has been studied by means of differential scanning calorimetry and polarised optical microscopy. The supramolecular organisation of these discotic molecules has been explored by temperature-dependent X-ray diffraction on powders and oriented samples. In addition to various liquid crystalline columnar phases (Col(hd), Col(rd)), an anisotropic plastic crystal phase is demonstrated to exist. The charge-carrier mobilities have been measured with the pulse-radiolysis time-resolved microwave-conductivity technique. They are found to be higher in the crystalline than in the liquid crystalline phases, with maximum values of approximately 0.9 and 0.3 cm(2) V(-1) s(-1), respectively, for the decylsulfanyl derivative. Mobilities strongly depend on the nature of the side chains.     

Biologically active fluorescent farnesol analogs

We describe ten polyene analogs of farnesol, typified by 3,7,11-trimethyl-2,4,6,8,10-dodecapentenaldehyde oxime, which preserve the length, cross-section, and approximate hydrophobicity of farnesol. Four of the ten display strong quorum-sensing activity in the human pathogen Candida albicans, with IC(50) values for inhibition of germ-tube formation as low as 10 microM. The polyenes display absorption maxima between 320 and 380 nm, with the extinction coefficients for the oximes approaching 100,000. All but two of the analogs are fluorescent, with excitation maxima varying over the range of 320-370 nm. Oxime anti-4, which can undergo fluorescence excitation at wavelengths beyond 400 nm, is demonstrated to be useful for confocal fluorescence microscopic imaging of fungal cells. The farnesol analogs are also expected to be useful for detection of farnesol binding proteins and in determination of farnesol pharmacokinetics.     

Development of a new family of conformationally restricted peptides as potent nucleators of beta-turns. Design, synthesis, structure, and biological evaluation of a beta-lactam peptide analogue of melanostatin

Novel enantiopure (i)-(beta-lactam)-(Gly)-(i+3) peptide models, defined by the presence of a central alpha-alkyl-alpha-amino-beta-lactam ring placed as the (i+1) residue, have been synthesized in a totally stereocontrolled way by alpha-alkylation of suitable N-[bis(trimethylsilyl)methyl]-beta-lactams. The structural properties of these beta-lactam pseudopeptides have been studied by X-ray crystallography, Molecular Dynamics simulation, and NOESY-restrained NMR simulated annealing techniques, showing a strong tendency to form stable type II or type II' beta-turns either in the solid state or in highly coordinating DMSO solutions. Tetrapeptide models containing syn- or anti-alpha,beta-dialkyl-alpha-amino-beta-lactam rings have also been synthesized and their conformations analyzed, revealing that alpha-alkyl substitution is essential for beta-turn stabilization. A beta-lactam analogue of melanostatin (PLG amide) has also been prepared, characterized as a type-II beta-turn in DMSO-d6 solution, and tested by competitive binding assay as a dopaminergic D2 modulator in rat neuron cultured cells, displaying moderate agonist activity in the micromolar concentration range. On the basis of these results, a novel peptidomimetic design concept, based on the separation of constraint and recognition elements, is proposed.     

Dynamics of pedestrians in regions with no visibility— A lattice model without exclusion

We investigate the motion of pedestrians through obscure corridors where the lack of visibility (due to smoke, fog, darkness, etc.) hides the precise position of the exits. We focus our attention on a set of basic mechanisms, which we assume to be governing the dynamics at the individual level. Using a lattice model, we explore the effects of non-exclusion on the overall exit flux (evacuation rate). More precisely, we study the effect of the buddying threshold (of no-exclusion per site) on the dynamics of the crowd and investigate to which extent our model confirms the following pattern revealed by investigations on real emergencies: If the evacuees tend to cooperate and act altruistically, then their collective action tends to favor the occurrence of disasters. The research reported here opens many fundamental questions and should be seen therefore as a preliminary investigation of the very complex behavior of the people and their motion in dark regions.     

Investigation of aggregation behavior using computational methods and absorption spectra for trisazo direct dyes

Direct dyes are likely to self-associate in aqueous solutions. Here, we present the aggregation characteristics of three trisazo direct dyes investigated using a procedure, which combines computational and experimental approaches. The geometric features of the molecules and their aggregates were elucidated by molecular modeling and optimization. The relative energies specific for the aggregation process yielded the optimum number of molecules forming an aggregate: two for AHDS dye and three for SDH and AIDS dyes. The results were further confirmed by using spectrometric determination and mathematical analysis. Accordingly, molecular aggregation was studied in aqueous solutions as a function of dye concentration (10^?6–10^?3 mol/l) and solution pH (4–10). As the dye concentration increased, shifts in absorption spectra were observed, suggesting the formation of aggregates. The pH variation produced a change in the spectral maximum, confirming the aggregation. The mathematical processing of the absorption spectrum data confirmed the number of chemical species of each aggregate as resulted from computational calculations.     

Thermal Studies of the Hardening of the Systems Calcium Silicates–Electrolyte–Water

Thermal studies, sometimes together with X-ray analysis, were applied to investigate the process of hydration in the systems calcium silicates (tricalcium silicate or dicalcium silicate) - water - electrolyte. Alkali metal or alkaline-earth metal salts were used as electrolytes. Results and conclusions are presented concerning the action of electrolytes upon the kinetics of hardening of the calcium silicates and the composition and phase transformation of calcium hydrosilicate in the presence of low proportions of electrolytes (0.5, 2 and 5 mass%), these effects being due to ionic substitution. A higher proportion of electrolyte (above 2%) in the systems calcium silicate-water can determine the formation of a complex salt, e.g. calcium hydroxysalts or double hydrosilicates. This revised version was published online in August 2006 with corrections to the Cover Date.     

On-line dilution and determination of the amount of concentrated hydrochloric acid in the final products from a hydrochloric acid production plant using a sequential injection titration system

An on-line sequential injection titration system for the determination of the concentration of concentrated hydrochloric acid as final product from a hydrochloric acid production plant is described. The system involves on-line dilution of the concentrated hydrochloric acid solution to an acceptable range for direct measurement by merging the sample stream with a de-ionized water diluent stream, followed by mixing in a dilution coil, before aspiration into the sequential injection system. Concentrated standard solutions were treated in exactly the same way as the samples. The system was evaluated for reproducibility, linearity, accuracy, and sample throughput. A linear relationship between peak width and logarithm of acid concentration was found in the range 5.934–8.995 mol l⁻¹ and a concentration of 0.005 mol l⁻¹ NaOH solution was used as titrant. Samples from the production plant showed excellent agreement when compared with the manual and automated batchwise titrations. The relative standard deviation was found to be less than 0.4% with a sample frequency of 30 samples per hour.     

Synthesis and Stereochemistry of Some New 1,3-Dioxane Derivatives of 1,4-Diacetylbenzene

 The synthesis and stereochemistry of new 1,3-dioxane derivatives of 1,4-diacetylbenzene are reported. The anancomeric structure of these compounds, the axial orientation of the aryl group for both 1,3-dioxane rings, and the cis and trans isomerism of some of these compounds is discussed considering data of conformational analysis, NMR investigations, and single crystal X-ray diffractometry.     

Molecular heterogeneous catalysis: a single-site zeolite-supported rhodium complex for acetylene cyclotrimerization

By anchoring metal complexes to supports, researchers have attempted to combine the high activity and selectivity of molecular homogeneous catalysis with the ease of separation and lack of corrosion of heterogeneous catalysis. However, the intrinsic nonuniformity of supports has limited attempts to make supported catalysts truly uniform. We report the synthesis and performance of such a catalyst, made from [Rh(C(2)H(4))(2)(CH(3)COCHCOCH(3))] and a crystalline support, dealuminated Y zeolite, giving {Rh(C(2)H(4))(2)} groups anchored by bonds to two zeolite oxygen ions, with the structure determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and the uniformity of the supported complex demonstrated by (13)C NMR spectroscopy. When the ethylene ligands are replaced by acetylene, catalytic cyclotrimerization to benzene ensues. Characterizing the working catalyst, we observed evidence of intermediates in the catalytic cycle by NMR spectroscopy. Calculations at the level of density functional theory confirmed the structure of the as-synthesized supported metal complex determined by EXAFS spectroscopy. With this structure as an anchor, we used the computational results to elucidate the catalytic cycle (including transition states), finding results in agreement with the NMR spectra.