Novel bio‐based IPNs obtained by simultaneous thermal polymerization of flexible methacrylate network based on a vegetable oil and a rigid epoxy

A series of novel vegetable oil‐based interpenetrating polymer networks (IPNs) have been successfully prepared: on one hand, methacrylated camelina oil (MCO) and a polyethyleneglycol dimethacrylate (PEG, MW 750 g/mol) and on the other hand, diglycidylether of bisphenol A (DER), in various blend ratios (75/25, 50/50, and 25/75 wt). Hence the appealing innovative direction of the current work was to build oil‐based poly(methacrylate) network using PEG macromonomer which is able to modulate adequately the crosslinking degree of the oil‐based network. These innovative combinations of cross‐linkable resins in terms of flexible methacrylate network based on camelina oil (CO) and PEG and a rigid epoxy (DER) were simultaneously polymerized using two independent non‐interfering curing reactions: free‐radical process for MCO and anionic polymerization of epoxy resin in the presence of a tertiary amine. The effect of the IPNs composition compositional characteristics on the reactivity of methacrylate or epoxy groups was studied using differential scanning calorimetry. The influence of the MCO‐PEG bio‐based polymer on the system properties was evaluated after curing by dynamic mechanical and thermogravimetric analyses. In addition mechanical and morphological studies were also carried out. The results suggested that blending of MCO and DER gave synergistic effects on the overall properties of the developed oil‐based IPNs and a dependence on the methacrylate/epoxy ratio was clearly noticed. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurement of natural radioactivity and radiation hazards for some natural and artificial building materials available in Romania

As building materials are known to be the second source regarding high radon concentrations, it is very important to determine the amounts of natural radionuclides from every building material in use. In the present study the most frequently used Romanian natural (sand, gypsum, limestone) and artificial (portland cement, lime, clinker, electrofilter powder, fly ash, cement-lime plaster mortar, cement plaster mortar) building materials were analyzed. The absorbed dose rate and the annual effective dose equivalent rate for people living in dwelling buildings made of these building materials under investigation were also calculated. The analysis was performed with gamma-ray spectrometry, with two hyper-pure germanium detectors. The activity concentrations of natural radionuclides were in the ranges: 5.2–511.8 Bq kg^?1 for ²²⁶Ra; 0.6–92.6 Bq kg^?1 for ²³²Th and <1–1,720.7 Bq kg^?1 for ⁴⁰K, respectively. The radium equivalent activity in the fifty-one (51) samples varied from 9 to 603 Bq kg^?1. By calculating all the radioactivity indices (Ra_eq, H _ext, I _α, I _yr) it was found that all the building materials under investigation can be used to erect dwelling buildings. Except for sample SA6, SA7 and SA11 among the natural building materials and sample SG1, SG2, FAH1, CLM1, CM1 among the artificial building materials that are considered hazardous materials when are used in large quantities.     

Copper(II) oxalate obtained through the reaction of 1,2-ethanediol with Cu(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>·3H<Subscript>2</Subscript>O

The paper presents the experimental results of the structural investigations and thermal analysis of copper(II) oxalate, a polynuclear coordination compound, obtained by a new method, through the reaction of 1,2-ethanediol with Cu(NO₃)₂·3H₂O. The reaction between 1,2-ethanediol and Cu(NO₃)₂·3H₂O occurs, under some working conditions, with the oxidation of 1,2-ethanediol to the oxalate anion (L). The synthesized polynuclear coordination compound, [CuL·0.3H₂O]_n, was characterized by chemical analysis, electronic and vibrational spectra and thermal analysis. The thermal properties of the polynuclear coordination compound have been investigated by TG, DTG and DSC. The obtained decomposition product is CuO. Powder XRD (X-ray diffraction), IR spectroscopy and TEM (transmission electron microscopy) were used to characterize the composition, the crystalline structure and the surface morphology of the copper oxide obtained through thermolysis. The thermal conversion product, copper(II) oxide, has a microporous structure with a large specific area.     

In Situ Self Assembly of Thiolated ortho‐Quinone Capped Electrocatalysts for Bioanalytical Applications

Thiolated o‐quinone‐capped electrocatalysts modeled on the naturally occurring o‐quinone cofactor pyrroloquinoline quinone (PQQ) were designed and synthesized for the development of biosensor devices. The o‐quinone‐capped electrocatalysts self assembled on gold electrodes through a thiolated phenyleneethynylene linkage to form a monolayer less than 2 nm in thickness. Cyclic voltammetric measurements demonstrated reversible electrochemical properties between the quinone and hydroquinone forms of the head group. In an amperometric sensing mode, the modified electrodes reproducibly detected ethanethiol at micromolar levels demonstrating their robust electrocatalytic activity toward thiols. Their redox cycling and electrocatalytic properties show promise for detection of biologically important thiols and other nucleophiles.     

Identification and quantification of phenolic compounds from Balanites aegyptiaca (L) Del (Balanitaceae) galls and leaves by HPLC-MS

Balanites aegyptiaca is a tropical plant which is widely used for medicinal purposes in several African countries, including Burkina Faso. Despite its widespread use, little is known about its phenolic content. This study sought to carry out a screening of the polyphenols from the leaves and galls of B. aegyptiaca. A high-performance liquid chromatography-mass spectrometry method was used to investigate the phenolic content in the parts of the plant studied here. The phenolic acid profile showed the presence of gentisic, p-coumaric, caffeic, ferulic and sinapic acids in the crude and hydrolysed extracts. The flavonoids pattern showed hyperoside, isoquercitrin, rutoside and quercitrin in the crude extract of leaves. Myricetol, quercetol and kaempferol were found after acid hydrolysis of the leaves extract. Ferulic acid, isoquercitrin, rutoside and quercitrin were identified as major phenolic compounds in this study.     

Synthesis of polystyrene/polybutylacrylate/layered silicate nanocomposites in aqueous medium

Synthesis of nanocomposites based on polystyrene/polybutylacrylate with layered silicates using emulsion polymerization procedure in aqueous medium allowed obtaining stable nanolatexes with sodium dodecyl sulfate as surfactant. Monomer and layered silicate nature influences the average diameter of the particles and the zeta potential appeared on the particle-disperse medium interface, as it was shown by dynamic light scattering analyses. In order to evidence the layered silicate structure, two structural evaluation methods were used. A new approach was used based on Fourier transform infrared analyses as a method to asses the clay delamination. The method was followed in conjunction with X-ray diffraction patterns and showed the pronounced delamination of the clay in the polymer matrix. The thermal stability was investigated by thermogravimetric analyses and the morphologies in solid state observed by environmental scanning electron microscope measurements.     

Bioactive Electrospun Fibers of Poly(ε-Caprolactone) Incorporating α-Tocopherol for Food Packaging Applications

Antioxidant activity is an important feature for food contact materials such as packaging, aiming to preserve freshness and retard food spoilage. Common bioactive agents are highly susceptible to various forms of degradation; therefore, protection is required to maintain functionality and bioavailability. Poly(ε-caprolactone) (PCL), a biodegradable GRAS labeled polymer, was used in this study for encapsulation of α-tocopherol antioxidant, a major component of vitamin E, in the form of electrospun fibers. Rheological properties of the fiber forming solutions, which determine the electrospinning behavior, were correlated with the properties of electrospun fibers, e.g., morphology and surface properties. Interactions through hydrogen bonds were evidenced between the two components. These have strong effect on structuration of macromolecular chains, especially at low α-tocopherol amounts, decreasing viscosity and elastic modulus. Intra-molecular interactions in PCL strengthen at high α-tocopherol amounts due to decreased solvation, allowing good structural recovery after cease of mechanical stress. Morphologically homogeneous electrospun fibers were obtained, with ~6 μm average diameter. The obtained fibers were highly hydrophobic, with fast release in 95% ethanol as alternative simulant for fatty foods. This induced good in vitro antioxidant activity and significant in vivo reduction of microbial growth on cheese, as determined by respirometry. Therefore, the electrospun fibers from PCL entrapping α-tocopherol as bioactive agent showed potential use in food packaging materials.     

Comparative Protective Effect of Nigella sativa Oil and Vitis vinifera Seed Oil in an Experimental Model of Isoproterenol-Induced Acute Myocardial Ischemia in Rats

The study’s aim was to characterize the composition of Nigella sativa seed (NSO) and grape seed (GSO) oils, and to evaluate their cardioprotective and anti-inflammatory effect on isoproterenol (ISO)-induced ischemia in rats. Materials and Methods: NSO and GSO supplements were physicochemically characterized. Liquid chromatography–mass spectrometry (HPLC-MS), Fourier-transform infrared spectroscopy (FTIR), and gas chromatography–mass spectrometry (GC-MS) analyses were used to determine the phytochemical composition in the oils. Total polyphenol content (TPC) and in vitro antioxidant activity were also determined. Pretreatment with 4 mL/kg/day NSO or GSO was administered to rats for 14 days. The experimental ischemia was induced by a single administration of ISO 45 mg/kg after 14 days. An electrocardiogram (ECG) was performed initially and 24 h after ISO. Biological evaluation was done at the end of experiment. Results: The HPLC-MS, GC-MS, and FTIR analyses showed that both NSO and GSO are important sources of bioactive compounds, especially catechin and phenolic acids in GSO, while NSO was enriched in flavonoids and thymol derivatives. Pretreatment with GSO and NSO significantly reduced ventricular conduction, prevented the cardiotoxic effect of ISO in ventricular myocardium, and reduced the level of proinflammatory cytokines and CK-Mb. Conclusion: Both NSO and GSO were shown to have an anti-inflammatory and cardioprotective effect in ISO-induced ischemia.     

Rate coefficients for the gas-phase reaction of OH radicals with dimethyl sulfide: temperature and O2 partial pressure dependence

Rate coefficients for the gas-phase reaction of hydroxyl (OH) radicals with dimethyl sulfide (CH(3)SCH(3), DMS) have been determined using a relative rate technique. The experiments were performed under different conditions of temperature (250-299 K) and O(2) partial pressure (approximately 0 Torr O(2)-380 Torr O(2)), at a total pressure of 760 Torr bath gas (N(2) + O(2)), in a 336 l reaction chamber, using long path in situ Fourier transform (FTIR) absorption spectroscopy to monitor the disappearance rates of DMS and the reference compounds (ethene, propene and 2-methylpropene). OH was produced by the photolysis of H(2)O(2). The following Arrhenius expressions adequately describe the rate coefficients as a function of temperature (units are cm(3) molecule(-1) s(-1)): k = (1.56 +/- 0.20) x 10(-12) exp[(369 +/- 27)/T], for approximately 0 Torr O(2); (1.31 +/- 0.08) x 10(-14) exp[(1910 +/- 69)/T], for 155 Torr O(2); (5.18 +/- 0.71) x 10(-14) exp[(1587 +/- 24)/T], for 380 Torr O(2). The results are compared with previous investigations.