Thermal stability of piroxicam

The application of thermal method is of great importance regarding the pharmaceutical problems such as the control of raw materials, the determination of purity, the qualitative and quantitative analysis of drug formulation, tests of thermal stability and compatibility and the determination of kinetic parameters etc. The purpose of a kinetic investigation is to calculate the kinetic parameters and the determination of the kinetic model for the studied process. The results are further used to predict the system’s behaviour in various circumstances. A kinetic study regarding the piroxicam—active substance’s thermal decomposition was performed under isothermal conditions and nitrogen atmosphere, for the temperature steps: 200, 205, 210, 215 and 220 °C. The TG/DTG data were processed by three differential methods: isothermal—isoconversional, Friedman’s isothermal isoconversional and isothermal model-fitting. The obtained results are in good accord between them, as well as with those obtained under non-isothermal conditions from a previous work and confirm the necessity of the kinetic parameters determining in different thermal conditions, by the adequate calculation methods.     

Diamond paste-based electrodes for determination of Cr(III) in pharmaceutical compounds

A new class of monocrystalline diamond paste-based electrodes is proposed for the determination of chromium(III) at trace levels in vitamins. Three types of monocrystalline diamond—natural diamond 1 (natural diamond), synthetic diamond 50 (synthetic-1), and synthetic diamond 1 (synthetic-2)—were used for electrode construction. The linear concentration ranges are between 10^–10 and 10^–8; 10^–9 and 10^–7, and 10^–10 to 10^–8 mol L^–1, with limits of detection of 10^–12, 10^–12, and 10^–11 mol L^–1, when natural diamond, synthetic-1, and synthetic-2, respectively, are used as electrode materials. For electrodes based on natural diamond and synthetic-1 it was found that Cr(III) yields a peak at about +0.275±0.015 V (vs. Ag/AgCl) within a predetermined positive potential range situated between +0.4 and +0.2 V, while for the electrode based on synthetic-2 the peaks are found at +0.300±0.015 V (vs. Ag/AgCl). The proposed method is reliable for the determination of chromium(III) at trace levels in two vitamin tablets (RSD<0.2%).     

Electroanalysis of Bisphenols A,F, and Z Using Graphene Based Stochastic Microsensors

Two stochastic microsensors based on immobilization of the complex between protoporphyrin IX and cobalt on nanographene paste and on the reduced graphene oxide paste were proposed for the simultaneous identification and quantification of bisphenols A (BPA), F (BPF) and Z (BPZ) from water samples. The signatures obtained for the BPA, BPF, and BFZ when both stochastic microsensors were used shown that the microsensors can be used for the discrimination between the three bisphenols in water samples. Very low limits of determination were obtained for the three bisphenols: 1fmol/L for BPA and BPF when the microsensor based on the immobilization of the complex between protoporphyrin IX and cobalt on nanographene paste was used, and 10fmol/L for BPZ when the microsensor based on the immobilization of the complex between protoporphyrin IX and cobalt on reduced graphene oxide paste was used. The linear concentration ranges covered by the proposed stochastic microsensors were: between 10^?15 and 10^?5 mol/L for BPA, between 10^?15 and 10^?7 mol/L for BPF, and between 10^?13 and 10^?10 mol/L for BPZ. The recoveries of the bisphenols in water samples were higher than 99.50 %, with RSD values lower than 1.00 %.     

Multicomponent quantitative resolution of binary mixtures by using continuous wavelet transform

Continuous 1-dimensional wavelet transform (WT) was applied to the quantitative analysis of a vitamin combination of thiamine hydrochloride (THI) and pyridoxine hydrochloride (PYR) with strongly overlapping signals. Absorbance data from the UV-Vis absorption spectrum of width 1150 were subjected to Gauss1 and Gauss2 WTs. Because of its flexibility, data processing, and its high signal amplitude, the continuous WT method is a powerful tool for analysis of multicomponent mixtures. By measuring the amplitude signals corresponding to the selected zero-crossing points of the transformed signal, we obtained the calibration curve. The validation of the calibration graphs was confirmed with different mixtures of THI and PYR at various concentration ratios. A brief explanation of the continuous wavelet method is given. MATLAB 6.5 software was used to perform the calculations. The results of our study were compared with those obtained by spectroscopic, chemometric, and liquid chromatographic methods, and good agreement was found.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

Vanadium bromoperoxidase-coupled fluorescent assay for flow cytometry sorting of glucose oxidase gene libraries in double emulsions

A Vanadium bromoPeroxidase-coupled fluorescent assay (ViPer) for ultrahigh-throughput screening of glucose oxidase (GOx) gene libraries employing double emulsions and flow cytometry was developed. The assay is based on detection of the product of a GOx reaction, hydrogen peroxide, that is first converted to a hypobromide by vanadium bromoperoxidase in the presence of sodium bromide. The hypobromide is afterwards detected in a reaction with a fluorogenic probe, 3-carboxy-7-(4'-aminophenoxy)-coumarine, where fluorescent 3-carboxy-coumarine is released. The ViPer screening system is three times more sensitive than a horseradish peroxidase coupled detection system and more resistant to bleaching of fluorescence in excess of peroxide. Using the ViPer screening system a high epPCR gene library containing 100,000 different GOx variants was screened for active clones in less than 1 h by flow cytometry. A library containing 0.15% of yeast cells expressing active enzyme variants and with an average GOx activity in the liquid culture of 0.47 U/mL, after one round of sorting, had 28.12% of the yeast cells expressing the active GOx (an enrichment factor of 200) and 26.8 U/mL of the GOx activity in the liquid culture (an enrichment factor of 57). The developed screening system could be adapted and used in a directed evolution of GOx and other hydrogen peroxide-producing enzymes (oxidases) and glycosidases if coupled with a carbohydrate oxidase.     

Ternary Copolymerization: Azeotropy and Pseudoazeotropy

An analysis of experimental data for ternary copolymerizations has been performed by an optimizing calculation method, resulting in the estimation of the r _ij copolymerization constants. The azeotrope calculation results have been compared to those based on the r _ij constants found for binary copolymerization. For each set of r _ij constants, the possibility of the ternary azeotropy was studied. The formation of quasihomogeneous ternary copolymers was studied subsequent to the determination of the ternary pseudoazeotropy domains occurring at the intersection of the partial pseudoazeotropy domains.     

Sodiation as a tool for enhancing the diagnostic value of MALDI‐TOF/TOF‐MS spectra of complex astaxanthin ester mixtures from Haematococcus pluvialis

The microalga Haematococcus pluvialis produces the pigment astaxanthin mainly in esterified form with a multitude of fatty acids, which results in a complex mixture of carotenol mono‐ and diesters. For rapid fingerprinting of these esters, matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF/TOF‐MS) might be an alternative to traditional chromatographic separation combined with MS. Investigation of ionization and fragmentation of astaxanthin mono‐ and diester palmitate standards in MALDI‐TOF/TOF‐MS showed that sodium adduct parent masses [M + Na]⁺ gave much simpler MS² spectra than radical / protonated [M]^+● / [M + H]⁺ parents. [M + Na]⁺ fragments yielded diagnostic polyene‐specific eliminations and fatty acid neutral losses, whereas [M]^+● / [M + H]⁺ fragmentation resulted in a multitude of non‐diagnostic daughters. For diesters, a benzonium fragment, formed by polyene elimination, was required for identification of the second fatty acid attached to the astaxanthin backbone. Parents were forced into [M + Na]⁺ ionization by addition of sodium acetate, and best signal‐to‐noise ratios were obtained in the 0.1 to 1.0 mM range. This method was applied to fingerprinting astaxanthin esters in a crude H. pluvialis extract. Prior to MALDI‐TOF/TOF‐MS, the extract was fractionated by normal phase Flash chromatography to obtain fractions enriched in mono‐ and diesters and to remove pheophytin a, which compromised monoester signals. All 12 types of all‐trans esterified esters found in LC were identified with MALDI‐TOF/TOF‐MS, with the exception of two minor monoesters. Copyright © 2013 John Wiley & Sons, Ltd.     

Combining planar and central chirality in ferrocene thiophosphine-sulfoxides

Novel chiral ferrocenylthiophosphine–sulfoxide and phosphine–sulfoxide derivatives possessing planar chirality for the ferrocene moiety and central chirality at the sulfur atom have been synthesized. These ligands can be obtained as pure diastereoisomers in both racemic and enantiomerically pure forms. Complete characterization by XRD analysis has allowed the assignment of the absolute configuration in each case. Preliminary coordination studies of the phosphine–sulfoxide ligands on platinum are also reported. These show chelating complexation by the phosphorous and sulfur atoms.