In situ electrochemical X-ray absorption spectroscopy of oxygen reduction electrocatalysis with high oxygen flux

An in situ electrochemical X-ray absorption spectroscopy (XAS) cell has been fabricated that enables high oxygen flux to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window. This cell design enables in situ XAS investigations of the oxygen reduction reaction (ORR) at high operating current densities greater than 1 mA in an oxygen-purged environment. When the cell was used to study the ORR for a Pt on carbon electrocatalyst, the data revealed a progressive evolution of the electronic structure of the metal clusters that is both potential-dependent and strongly current-dependent. The trends establish a direct correlation to d-state occupancies that directly tracks the character of the Pt-O bonding present.     

A slowly relaxing rigid biradical for efficient dynamic nuclear polarization surface-enhanced NMR spectroscopy: expeditious characterization of functional group manipulation in hybrid materials

A new nitroxide-based biradical having a long electron spin-lattice relaxation time (T(1e)) has been developed as an exogenous polarization source for DNP solid-state NMR experiments. The performance of this new biradical is demonstrated on hybrid silica-based mesostructured materials impregnated with 1,1,2,2-tetrachloroethane radical containing solutions, as well as in frozen bulk solutions, yielding DNP enhancement factors (ε) of over 100 at a magnetic field of 9.4 T and sample temperatures of ~100 K. The effects of radical concentration on the DNP enhancement factors and on the overall sensitivity enhancements (Σ(?)) are reported. The relatively high DNP efficiency of the biradical is attributed to an increased T(1e), which enables more effective saturation of the electron resonance. This new biradical is shown to outperform the polarizing agents used so far in DNP surface-enhanced NMR spectroscopy of materials, yielding a 113-fold increase in overall sensitivity for silicon-29 CPMAS spectra as compared to conventional NMR experiments at room temperature. This results in a reduction in experimental times by a factor >12,700, making the acquisition of (13)C and (15)N one- and two-dimensional NMR spectra at natural isotopic abundance rapid (hours). It has been used here to monitor a series of chemical reactions carried out on the surface functionalities of a hybrid organic-silica material.     

Nuclear magnetic resonance investigation of dynamics in poly(ethylene oxide)-based lithium polyether-ester-sulfonate ionomers

Nuclear magnetic resonance spectroscopy has been utilized to investigate the dynamics of poly(ethylene oxide)-based lithium sulfonate ionomer samples that have low glass transition temperatures. (1)H and (7)Li spin-lattice relaxation times (T(1)) of the bulk polymer and lithium ions, respectively, were measured and analyzed in samples with a range of ion contents. The temperature dependence of T(1) values along with the presence of minima in T(1) as a function of temperature enabled correlation times and activation energies to be obtained for both the segmental motion of the polymer backbone and the hopping motion of lithium cations. Similar activation energies for motion of both the polymer and lithium ions in the samples with lower ion content indicate that the polymer segmental motion and lithium ion hopping motion are correlated in these samples, even though lithium hopping is about ten times slower than the segmental motion. A divergent trend is observed for correlation times and activation energies of the highest ion content sample with 100% lithium sulfonation due to the presence of ionic aggregation. Details of the polymer and cation dynamics on the nanosecond timescale are discussed and complement the findings of X-ray scattering and quasi-elastic neutron scattering experiments.     

Raman, FTIR, photoacoustic-infrared, and inelastic neutron scattering spectra of ternary metal hydride salts A2MH5, (A = Ca, Sr, Eu; M = Ir, Rh) and their deuterides

The vibrational spectra of the ternary metal hydride (deuteride) salts, A(2)MH(5) and A(2)MD(5), where A = calcium, strontium and europium and M = iridium(I) and rhodium(I), have been assigned using Raman, Fourier transform infrared, photoacoustic infrared, and inelastic neutron scattering spectroscopies and density functional theory (DFT) calculations. The wavenumbers of the infrared-active stretching vibrations depend upon the ionization energies of the central metal atom and the cation. The phase transition in calcium pentahydridoiridate(I) was studied as a function of temperature and pressure.     

The ring-opening reaction of chromenes: a photochemical mode-dependent transformation

The efficiency of the photochemical ring-opening of chromenes (or benzopyrans) depends on the vibronic transition selected by the chosen excitation wavelength. In the present work, ab initio CASPT2//CASSCF calculations are used to determine the excited-state ring-opening reaction coordinate for 2H-chromene (C) and 2,2-diethyl-2H-chromene (DEC) and provide an explanation for such an unusual mode-dependent behavior. It is shown that excited-state relaxation and decay occur via a multimodal and barrierless (or nearly barrierless) reaction coordinate. In particular, the relaxation out of the Franck-Condon involves a combination of in-plane skeletal stretching and out-of-plane modes, while the second part of the reaction coordinate is dominated exclusively by a different out-of-plane mode. Population of this last mode is shown to be preparatory with respect to both C-O bond breaking and decay via an S(1)/S(0) conical intersection. The observed mode-dependent ring-opening efficiency is explained by showing that the vibrational mode corresponding to the most efficient vibronic transition has the largest projection onto the out-of-plane mode of the reaction coordinate. To support the computationally derived mechanism, we provide experimental evidence that the photochemical ring-opening reaction of 2,2-dimethyl-7,8-benzo(2H)chromene, that similarly to DEC exhibits a mode-dependent photoreaction, has a low ( approximately 1 kcal mol(-1)) activation energy barrier.     

Relaxation dynamics in glycerol-water mixtures: I. Glycerol-rich mixtures

We discuss the relaxation dynamics of glycerol-water mixtures, as studied by dielectric spectroscopy in the frequency range from 1 Hz to 250 MHz and at temperatures between 173 and 323 K. The experimental results obtained for the glycerol-rich mixtures suggest that the main dielectric relaxation process, as well as the so-called high-frequency "excess wing" (EW) and dc conductivity, follow the same temperature dependence. This result indicates that all of these processes are induced by the same molecular origin. A new phenomenological function is proposed to describe the whole dielectric spectrum in the covered frequency range, and some possible mechanisms of dielectric behaviors through the dc conductivity, the main relaxation process, and the EW are discussed.     

Design, synthesis, and binding affinities of pyrrolinone-based somatostatin mimetics

[structure: see text] Tetrapyrrolinone somatostatin (SRIF) mimetics (cf. 1), based on a heterochiral (D,L-mixed) pyrrolinone scaffold, were designed, synthesized, and evaluated for biological activity. The iterative synthetic sequence, incorporating the requisite functionalized coded and noncoded amino acid side chains, comprised a longest linear synthetic sequence of 23 steps. Binding affinities at two somatostatin receptor subtypes (hsst 4 and 5) reveal micromolar activity, demonstrating that the d,l-mixed pyrrolinone scaffold can be employed to generate functional mimetics of peptide beta-turns.     

REACTIONS OF TELLURIUM TETRAHALIDES WITH GLYCOLS

Abstract

Tellurium tetrahalides undergo reaction with glycols to yield three different products: O,O'-dioxotrihalotellurates; bis(alkoxy)dihalotellurium (IV) compounds and hexahalotellurates. The course of the reaction appears to be determined primarily by the nature of the glycol. The structure of dichlorobis(cis- 2-hydroxycyclohexyloxy)tellurium(IV) has been determined crystallographically     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

Investigations with the finite element method on the Cyber 205

We are trying to investigate systematically the application of the finite element method (FEM) for solving the Schrödinger equation. The present paper is devoted to the calculation of vibrational transition probabilities for the collinear reactive system A + BC (i.e. H+H₂ and their isotopes). The calculations are fully two-dimensional and the results are compared with earlier FEM calculations and conventional basis set expansion methods using the the R-matrix or S-matrix propagation.We made extensive analysis of FEM on the vector-computer Cyber 205 and developed a vector code for the efficient use in two dimensions, so that in the near future applications even in three dimensions will be possible.For the hydrogen exchange reactions we investigated the following isotope combinations: (a) H + H₂, b) H + DH, D + HD and H + MuH (symmetric reaction), (c) D + HH, H + DD and Mu + DD (asymmetric reaction). We calculated the transition probabilities for up to five open vibrational channels and found excellent agreement with known exact values.