Application of double-spike isotope dilution for the accurate determination of Cr(III), Cr(VI) and total Cr in yeast

A method is presented for the simultaneous determination of Cr(III) and Cr(VI) in yeast using species-specific double-spike isotope dilution (SSDSID) with anion-exchange liquid chromatography (LC) separation and sector field inductively coupled plasma mass spectrometric (SF-ICP-MS) detection. Total Cr is quantitated using ID SF-ICP-MS. Samples were digested on a hot plate at 95±2 °C for 6 h in an alkaline solution of 0.5 M NaOH and 0.28 M Na₂CO₃ for the determination of Cr(III) and Cr(VI), whereas microwave-assisted decomposition with HNO₃ and H₂O₂ was used for the determination of total Cr. Concentrations of 2,014±16, 1,952±103 and 76±48 mg kg⁻¹ (one standard deviation, n=4, 3, 3), respectively were obtained for total Cr, Cr(III) and Cr(VI) in the yeast sample. Significant oxidation of Cr(III) to Cr(VI) (24.2±7.6% Cr(III) oxidized, n=3) and reduction of Cr(VI) to Cr(III) (37.6±6.5% Cr(VI) reduced, n=3 ) occurred during alkaline extraction and subsequent chromatographic separation at pH 7. Despite this significant bidirectional redox transformation, quantitative recoveries for both Cr(III) and Cr(VI) were achieved using the SSDSID method. In addition, mass balance between total Cr and the sum of Cr(III) and Cr(VI) concentrations was achieved. Method detection limits of 0.3, 2 and 30 mg kg⁻¹ were obtained for total Cr, Cr(VI) and Cr(III), respectively, based on a 0.2-g sub-sample.     

Network dimensionality and ligand flexibility in lanthanide terephthalate hydrates

Various lanthanide open framework materials incorporating the terephthalate (TP) entity were prepared using hydrothermal synthesis methods at a moderate temperature of 170 °C. The compounds Nd₂(TP)₃(H₂O)₄(1), Er₂(TP)₃(H₂O)₄(2), Yb₂(TP)₃(H₂O)₂(3), Yb₂(TP)₃(H₂O)₆(4), and Yb₂(TP)₃(H₂O)₈·2H₂O (5), were characterized by single crystal structural analysis and FT-IR spectroscopy. While compounds 1 and 2 have been reported before on the basis of powder X-ray diffraction, the structural characterization of any ytterbium terephthalate species is unprecedented. Compounds 1-5 crystallize in triclinic settings with space group P-1. The compounds are compared with their previously reported Er and Tb-counterparts and the reduction of the dimensionality of the resulting networks from 3D over 2D to 1D with increasing level of hydration is discussed. Compounds 1, 2, and 3 with the lowest water content assemble in three-dimensional network lattices. Compounds 4 and 5, however, form 2D layered systems and 1D rod like chains, respectively, which are held together by hydrogen bonds originating from coordinating H₂O. The crystal lattices of the 3D networks experience higher levels of tension as can be seen by increasing out-of-plane torsion with regard to the terephthalate carboxylate groups. Moreover, there seems to be a correlation between the level of strain on the aromatic ligands and the reduction of the number of carboxylate oxygen atoms that are part of the coordination polyhedra.     

MRI of hepatic lymphoma

Thirteen patients with biopsy proven hepatic lymphoma (2 Hodgkin, 11 Non-Hodgkin) and a control group of 15 patients with hepatic metastases were analyzed quantitatively and qualitatively by MRI. Focal hepatic lymphoma was most reliably detected (eight of eight patients) and appeared hypointense relative to liver on T₁ weighted (CNR − 7.4 ± 2.3) and hyperintense on T₂ weighted (CNR + 8.4 ± 2.9) images. The mean T₁ and T₂ relaxation times of focal hepatic lymphoma (T₁ = 832 ± 234 msec, T₂ = 84 ± 16 ms) differed significantly from adjacent non-tumorous liver (T₁ = 420 ± 121 ms, T₂ = 51 ± 9 ms; p < 0.05), however CNR values and relaxation times were similar to those of hepatic metastases. Diffuse hepatic lymphoma (microscopic periportal infiltration) was undetectable by MRI in three patients by either morphologic features or quantitative criteria. A mixed pattern of hepatic lymphoma (focal lesions and diffuse infiltration) showed focal areas of slightly decreased signal intensity on T₁ weighted images (CNR = −1.7 ± 0.4) while T₂ weighted images revealed multiple regions of focal hyperintensity (CNR = +13.3 ± 8.4) superimposed on a diffusely hyperintense liver. Our experience demonstrates that either T₁ or T₂ weighted techniques are useful in detecting focal and that T₂ weighted techniques are useful in detecting mixed hepatic lymphoma. Conventional image derived relaxation time measurements and quantitative parameters were of no additional diagnostic value.     

Cucurbituril‐mediated immobilization of fluorescent proteins on supramolecular biomaterials

The reversible introduction of functionality at material surfaces is of interest for the development of functional biomaterials. In particular, the use of supramolecular immobilization strategies facilitates mild reaction and processing conditions, as compared to other covalent analogues. Here, the engineering of multicomponent supramolecular materials, beyond the use of a single supramolecular entity is proposed. Cucurbit[8]uril (Q8) mediated host–guest chemistry is combined with hydrogen bonding supramolecular 2‐ureido‐4‐pyrimidinone (UPy)‐based materials. The modular incorporation of a UPy‐additive that presents one guest to incorporate into the Q8 host allows for selective supramolecular functionalization at the water–polymer material interface. Supramolecular ternary complex formation at the material surface was studied by X‐ray photoelectron spectroscopy, which as a result of large overlap in atomic composition of the different components showed minor changes is surface composition upon complex formation. Surface MALDI‐ToF MS measurements revealed useful insights in the formation of complexes. Protein immobilization was monitored using both fluorescence spectroscopy and quartz crystal microbalance with dissipation monitoring, which successfully demonstrated ternary complex formation. Although proteins could selectively be immobilized onto the surfaces, control of the system's stability remains a challenge as a result of the dynamicity of the host–guest assembly. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3607–3616     

Designing micro-patterned Ti films that survive up to 10% applied tensile strain

Reducing the strain in brittle device layers is critical in the fabrication of robust flexible electronic devices. In this study, the cracking behavior of micro-patterned 500-nm-thick Ti films was investigated via uniaxial tensile testing by in situ SEM and 4-point probe measurements. Both visual observations by SEM and 4-pt resistance measurements showed that strategically patterned oval holes, off-set and rotated by 45°, had a significant effect on limiting the extent of cracking, specifically, in preventing cracks from converging. Failure with regard to electrical conduction was delayed from less than 2% to more than 10% strain.     

Asynchronous sampling for ultrafast experiments with low momentum compaction at the ANKA ring

A high‐repetition‐rate pump–probe experiment is presented, based on the asynchronous sampling approach. The low‐α mode at the synchrotron ANKA can be used for a time resolution down to the picosecond limit for the time‐domain sampling of the coherent THz emission as well as for hard X‐ray pump–probe experiments, which probe structural dynamics in the condensed phase. It is shown that a synchronization of better than 1 ps is achieved, and examples of phonon dynamics of semiconductors are presented.     

Rapid initiation of reactions in Al/Ni multilayers with nanoscale layering

Research into nanoenergetic materials is enabling new capabilities for controlling exothermic reaction rates and energy output, as well as new methods for integrating these materials with conventional electronics fabrication techniques. Many reactions produce primarily heat, and in some cases it is desirable to increase the rate of heat release beyond what is typically observed. Here we investigate the Al-Ni intermetallic reaction, which normally propagates across films or foils at rates lower than 10 m/s. However, models and experiments indicate that local heating rates can be very high (10⁷ K/s), and uniform heating of such a multilayer film can lead to a rapid, thermally explosive type of reaction. With the hopes of using a device to transduce electrical energy to kinetic energy of a flyer plate in the timescale of 100's of nanoseconds, we have incorporated a Ni/Al nanolayer film that locally heats upon application of a large electrical current. We observed flyer plate velocities in the 2-6 km/s range, corresponding to 4-36 kJ/g in terms of specific kinetic energy. Several samples containing Ni/Al films with different bilayer thicknesses were tested, and many produced additional kinetic energy in the 1.1-2.3 kJ/g range, as would be expected from the Ni-Al intermetallic reaction. These results provide evidence that nanoscale Ni/Al layers reacted in the timescale necessary to contribute to device output.