Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

First structural characterization of binary AsIII and SbIII azides

The highly explosive molecules As(N(3))(3) and Sb(N(3))(3) were obtained in pure form by the reactions of the corresponding fluorides with (CH(3))(3)SiN(3) in SO(2) and purification by sublimation. The crystal structures and (14)N NMR, infrared, and Raman spectra were determined, and the results compared to ab initio second-order perturbation theory calculations. Whereas Sb(N(3))(3) possesses a propeller-shaped, pyramidal structure with perfect C(3) symmetry, the As(N(3))(3) molecule is significantly distorted from C(3) symmetry due to crystal packing effects.     

Double Yielding in a Styrene/Butadiene Star Block Copolymer

Summary: The morphology and tensile deformation behaviour of a highly asymmetric styrene/butadiene star block copolymer (polystyrene (PS) content = 74%) containing random PS‐co‐PB (polybutadiene) copolymer as a rubbery phase were investigated. The existence of double yielding, similar to that observed in some semicrystalline polymers, was detected in this nanostructured amorphous polymer. The observed phenomenon may be correlated with two different micromechanical processes taking place at the initial stage of deformation.

The stress‐strain curve of the star block copolymer prepared here (each curve represents a different method). The two yield points are clearly visible (labelled I and II).     

Particle scattering factor of pearl necklace chains

The particle scattering behaviour of a pearl necklace chain is derived. The chain is composed of sphere-like pearls, separated by rod-like segments of fixed length, which have no angular restrictions. By calculating several series of model scattering curves, the important structural features are retrieved. The model is believed to be useful in interpreting intermediate structures of collapsing macromolecules or polyelectrolytes. A first application to a shrinking polyelectrolyte coil generated by molecular dynamic simulations (Limbach and Holm, J.Phys.Chem. 2003) is presented and used to discuss the potentials and limits of the model.     

Considerations for quantification of lipids in nerve tissue using matrix-assisted laser desorption/ionization mass spectrometric imaging

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometric imaging is a technique that provides the ability to identify and characterize endogenous and exogenous compounds spatially within tissue with relatively little sample preparation. While it is a proven methodology for qualitative analysis, little has been reported for its utility in quantitative measurements. In the current work, inherent challenges in MALDI quantification are addressed. Signal response is monitored over successive analyses of a single tissue section to minimize error due to variability in the laser, matrix application, and sample inhomogeneity. Methods for the application of an internal standard to tissue sections are evaluated and used to quantify endogenous lipids in nerve tissue. A precision of 5% or less standard error was achieved, illustrating that MALDI imaging offers a reliable means of in situ quantification for microgram-sized samples and requires minimal sample preparation.     

Determination of organophosphorus, triazine and 2,6-dinitroaniline pesticides in aqueous samples via solid-phase microextraction (SPME) and gas chromatography with nitrogen-phosphorus detection

Solid-phase microextraction (SPME) represents a very simple and rapid method for the extraction of organophosphorus, triazine and 2,6-dinitroaniline pesticides from aqueous samples without making use of any solvents. The same fiber can be used repeatedly. Moreover, a sample volume as small as 3 mL can be employed with no loss in sensitivity. 34 compounds have been extracted from aqueous samples by SPME using a 85 m polyacrylate fiber. For organophosphorus pesticides, a 100 m polydimethylsiloxane fiber has been used additionally for comparison. The fibers were directly introduced into the heated split/splitless injector of the gas chromatograph and determined using a nitrogen-phosphorus detector. The method was evaluated with respect to the limit of detection (LOD), linearity and precision. The limit of detection (LOD) depends on the compound and varies from 0.005–0.09 g/L. The method is linear over at least three orders of magnitude with coefficients of correlation usually >0.999. For triazines and 2,6-dinitroanilines the coefficient of variation (precision) is <8% while for organophosphorus compounds it may reach values up to 18% (however, if the latter compounds are extracted using the polydimethylsiloxane phase considerably higher precision is achieved). The partitioning of the analyte between the aqueous phase and the polymeric phase depends on the hydrophobicity of the compound as expressed by the octanol/water partitioning coefficient (P_ow). For triazines it was shown that there is a linear dependence of the logarithm of the analyte response on the log(P_ow) i.e. the higher the hydrophobicity, the higher the affinity of the analytes to the polymeric phase of the fiber and the higher the response. Salt addition has a strong effect on the extraction efficiency. This effect increases with decreasing hydrophobicity (increasing polarity) of the compound. The triazines ametryn, atrazine, propazine, simazine and simetryn have been identified in a ground water well sample by SPMEGC/NPD.     

Synthese und Kristallstrukturen der Phosphaniminato-Komplexe [MCl2(NPPh3)]2 mit M = Al und Ga, [SbCl2(NPMe3)(DMF)]2 sowie des Phosphanimin-Komplexes [Ph3PNH · BF3] · THF

Syntheses and Crystal Structures of the Phosphorane Iminato Complexes [MCl₂(NPPh₃)]₂ with M = Al and Ga, [SbCl₂(NPMe₃)(DMF)]₂, and of the Phosphorane Imine Complex [Ph₃PNH · BF₃] · THF The phosphorane iminato complexes [MCl₂(NPPh₃)]₂ with M = Al and Ga and [SbCl₂(NPMe₃)(DMF)]₂ are formed as colourless crystals by reactions of the anhydrous trichlorides MCl₃ (M = Al, Ga, Sb) with the corresponding silylated phosphorane imines Me₃SiNPR₃ in acetonitrile and in dimethyl formamide, respectively. The phosphorane imine derivative [Ph₃PNH · BF₃] · THF is formed from Me₃SiNPPh₃ and boron trifluoride etherate in boiling tetrahydrofuran. The compounds are characterized by their i. r. spectra and by crystal structure analyses. [AlCl₂(NPPh₃)]₂ : Space group P1 , Z = 1, structure solution with 1 585 observed unique reflections, R = 0.061. Lattice dimensions at ?70°C: a = 917.6, b = 1 053.5, c = 1 145.2 pm, α = 111.72°, β = 100.80°, γ = 109.95°. [GaCl₂(NPPh₃)]₂ : Space group P1 , Z = 1, structure solution with 2 586 observed unique reflections, R = 0.066. Lattice dimensions at ?70°C: a = 917.5, b = 1 058.3, c = 1 153.7 pm, α = 105.52°, β = 107.75°, γ = 109.88°. In both compounds the metal atoms are linked to planar M₂N₂ four-membered rings via the N-atoms of the phosphorane iminato groups. [SbCl₂(NPMe₃)(DMF)]₂ : Space group P2₁/n, Z = 4, structure solution with 3 805 observed unique reflections, R = 0.038. Lattice dimensions at ?70°C: a = 1 913.0, b = 726.8, c = 2 040.7 pm, β = 113.62°. The unit cell contains two symmetry independent dimeric molecules, in which the antimony atoms are centrosymmetricly μ₂ linked via the N-atoms of the phosphorane iminato groups. Along with the oxygen atom of the dimethyl formamide molecule the Sb atoms achieve a ψ-octahedral environment. [Ph₃PNH · BF₃] · THF : Space group C2/c, Z = 8, structure solution with 2 048 observed unique reflections, R = 0.058. Lattice dimensions at ?70°C: a = 2 460.4, b = 869.2, c = 1 978.0 pm, β = 116.35°.