Eco‐friendly ionic liquid assisted capillary electrophoresis and α‐acid glycoprotein‐assisted liquid chromatography for simultaneous determination of anticancer drugs in human fluids

In the current work, two eco‐friendly analytical methods based on capillary electrophoresis (CE) and reversed phase liquid chromatography (RPLC) were developed for simultaneous determination of the most commonly used anticancer drugs for Hodgkin's disease: methotrexate (MTX), vinblastine, chlorambucil and dacarbazine. A background electrolyte (BGE) of 12.5 mmol/L phosphate buffer at pH 7.4 and 0.1 µmol/L 1‐butyl‐3‐methyl imidazolium bromide (BMImBr) ionic liquid (IL) was used for CE measurements at 250 nm detection wavelength, 20 kV applied voltage and 25 °C. The rinsing protocol was significantly improved to reduce the adsorption of IL on the interior surface of capillary. Moreover, RPLC method was developed on α‐1‐acid glycoprotein (AGP) column. Mobile phase was 10 mmol/L phosphate buffer at pH 6.0 (100% v/v) and flow rate at 0.1 mL/min. As AGP is a chiral column, it was successfully separated l ‐MTX from its enantiomer impurity d ‐MTX. Good linearity of quantitative analysis was achieved with coefficients of determinations (r²) >0.995. The stability of drugs measurements was investigated with adequate recoveries up to 24 h storage time under ambient temperature. The limits of detection were <50 and 90 ng/mL by CE and RPLC, respectively. The using of short‐chain IL as an additive in BGE achieved 600‐fold sensitivity enhancement compared with conventional Capillary Zone Electrophoresis (CZE). Therefore, for the first time, the proposed methods were successfully applied to determine simultaneously the analytes in human plasma and urine samples at clinically relevant concentrations with fast and simple pretreatments. Developed IL‐assisted CE and RPLC methods were also applied to measure MTX levels in patients’ samples over time. Copyright © 2014 John Wiley & Sons, Ltd.     

The first coordination polymer of lanthanum(III) with a naphthalene‐1,4,5,8‐tetracarboxylic 1,8‐anhydride derivative

The title compound, catena‐poly[[[heptaaqualanthanum(III)]‐μ‐1,3‐dioxo‐2‐oxa‐1H,3H‐phenalene‐6,7‐dicarboxylato‐κ²O⁶:O⁷] hemi(4,8‐dicarboxynaphthalene‐1,5‐dicarboxylate) dihydrate], {[La(C₁₄H₄O₇)(H₂O)₇](C₁₄H₆O₈)_0.5·2H₂O}_n, is a dihydrate of a coordination polymer between the dianion of naphthalene‐1,4,5,8‐tetracarboxylic 1,8‐anhydride and the heptahydrated lanthanum(III) ion, charge balanced by an additional 4,8‐dicarboxynaphthalene‐1,5‐dicarboxylate dianion that is located on an inversion centre and is not coordinated to the metal ion. The linear polymeric arrays adopt a comb‐like structure, and these pack in pairs with one chain interpenetrating another, like two parts of a zip, to optimize stacking interactions between their ligand fragments. All the components of this compound are further interlinked by an extensive pattern of O—H...O hydrogen bonds throughout the crystal structure. The main scientific significance of the results reported here is that they demonstrate for the first time the feasibility of coordination polymerization of the above organic ligand with lanthanide ions. The resulting polymer has a unique architecture. Finally, the reported structure is a rare example where the tetraacid and the diacid anhydride ligand species co‐exist in the same crystal.     

Comparison of the quality of aqueous dispersions of single wall carbon nanotubes using surfactants and biomolecules

The use of single wall carbon nanotubes (SWCNTs) in current and future applications depends on the ability to process SWCNTs in a solvent to yield high-quality dispersions characterized by individual SWCNTs and possessing a minimum of SWCNT bundles. Many approaches for the dispersion of SWCNTs have been reported. However, there is no general assessment which compares the relative quality and dispersion efficiency of the respective methods. Herein we report a quantitative comparison of the relative ability of "wrapping polymers" including oligonucleotides, peptides, lignin, chitosan, and cellulose and surfactants such as cholates, ionic liquids, and organosulfates to disperse SWCNTs in water. Optical absorption and fluorescence spectroscopy provide quantitative characterization (amount of SWCNTs that can be suspended by a given surfactant and its ability to debundle SWCNTs) of these suspensions. Sodium deoxy cholate (SDOCO), oligonucleotides (GT)(15), (GT)(10), (AC)(15), (AC)(10), C(10-30), and carboxymethylcellulose (CBMC-250K) exhibited the highest quality suspensions of the various systems studied in this work. The information presented here provides a good framework for further study of SWCNT purification and applications.     

Cu and CN-selective fluorogenic sensors based on pyrene-appended thiacalix[4]arenes

Two new fluorescent sensors 1 and 2 based on thiacalix[4]arenes bearing pyrene moieties have been synthesized in cone conformation. The binding abilities of these sensors towards different cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver, mercury and anions like fluoride, chloride, bromide, iodide, cyanide, acetate, hydrogen sulfate and nitrate have been examined by UV-vis and fluorescence spectroscopies. These receptors show pronounced selectivity for copper and cyanide ions. In CH₂Cl₂/CH₃CN (1:1), the presence of Cu(II) ion induces the formation of 1:1 (H/G) complex with receptor 1 and 1:2 (H/G) complex with receptor 2. The cyanide ions form a 1:1 (H/G) complex with both receptors.     

Ionic liquid [Hmim]HSO4-promoted one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts

The first example of the one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts is reported. The reaction involves oxidation of Baylis-Hillman adducts with NaNO₃ in the Brønsted acidic ionic liquid [Hmim]HSO₄ to give [E]-α-cyanocinnamaldehydes followed by conjugate hydrothiocyanation/hydrosulfenylation with NH₄SCN/PhSH to afford the corresponding β-thiocyanato (or β-phenylsulfenyl)-α-cyanohydrocinnamaldehydes diastereoselectively in 76-89% yields in a one-pot procedure. After isolation of the product, the ionic liquid [Hmim]HSO₄ could be easily recycled for further use.     

Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

Nanostructural organization and anion effects in the optical Kerr effect spectra of binary ionic liquid mixtures

This article reports a study of the effect of anions on the optical Kerr effect (OKE) spectra of binary ionic liquid mixtures with one mixture comprising the 3-methyl-1-pentylimidazolium ([C 5mim] (+)) cation and the anions PF 6 (-) and CF 3CO 2 (-) (TFA (-)), and another mixture comprising the [C 5mim] (+) cation and the anions Br (-) and bis(trifluomethanesulfonyl)imide (NTf 2 (-)). The spectra were obtained by the use of optical heterodyne-detected Raman-induced Kerr Effect Spectroscopy at 295 K. The OKE spectra of the mixtures are compared with the calculated mole-fraction weighted sum of the normalized OKE spectra of the neat liquids. The OKE spectra are nearly additive for [C 5mim]Br/[C 5mim][NTf 2] mixtures, but nonadditive for [C 5mim][PF 6]/[C 5mim][TFA] mixtures. In the case of the equimolar [C 5mim][PF 6]/[C 5mim][TFA] mixture, the nonadditivity is such that the experimental OKE spectrum is narrower than the calculated OKE spectrum. The additivity or nonadditivity of OKE spectra for IL mixtures can be explained by assuming ionic liquids are nanostructurally organized into nonpolar regions and ionic networks. The ionic networks in mixtures will be characterized by "random co-networks" for anions that are nearly the same in size (PF 6 (-) and TFA (-)) and by "block co-networks" for anions that differ greatly in size (Br (-) and NTf 2 (-)).     

Rapid bioenabled formation of ferroelectric BaTiO3 at room temperature from an aqueous salt solution at near neutral pH

A 12-mer peptide, identified through phage display biopanning, has been used for the first time to induce the rapid formation of ferroelectric (tetragonal) nanocrystalline BaTiO3 at room temperature from an aqueous salt precursor solution at near neutral pH. BaTiO3 is widely used in capacitors, thermistors, displays, and sensors owing to its attractive dielectric, ferroelectric, pyroelectric, optical, and electrochemical properties. Two 12-mer peptides (BT1 and BT2) were selected from a phage-displayed peptide library via binding to tetragonal BaTiO3 powder. While these peptides possessed various types of amino acids, 8 of the 12 amino acids were common to both peptides. Each of these peptides induced the formation of faceted nanoparticles (50-100 nm diameter) from an aqueous precursor solution. X-ray diffraction and selected area electron diffraction patterns obtained from these faceted nanoparticles were consistent with the BaTiO3 compound. Rietveld analyses of the X-ray diffraction patterns yielded good fits to tetragonal crystal structures, with the BaTiO3 formed in the presence of the BT2 peptide exhibiting the most tetragonal character. A coating of the latter BaTiO3 nanoparticles exhibited polarization hysteresis (a well-known characteristic of ferroelectric materials) at room temperature and a relative permittivity of 2200. Such rapid, peptide-induced precipitation at room temperature provides new opportunities for direct BaTiO3 formation on low-melting or reactive materials (e.g., plastics, cloths, bio-organics) and the low temperature integration of BaTiO3 into electronic devices (e.g., on silicon or flexible polymer substrates).     

Exceptionally Plastic/Elastic Organic Crystals of a Naphthalidenimine-Boron Complex Show Flexible Optical Waveguide Properties

The design of molecular compounds that exhibit flexibility is an emerging area of research. Although a fair amount of success has been achieved in the design of plastic or elastic crystals, realizing multidimensional plastic and elastic bending remains challenging. We report herein a naphthalidenimine–boron complex that showed size-dependent dual mechanical bending behavior whereas its parent Schiff base was brittle. Detailed crystallographic and spectroscopic analysis revealed the importance of boron in imparting the interesting mechanical properties. Furthermore, the luminescence of the molecule was turned-on subsequent to boron complexation, thereby allowing it to be explored for multimode optical waveguide applications. Our in-depth study of the size-dependent plastic and elastic bending of the crystals thus provides important insights in molecular engineering and could act as a platform for the development of future smart flexible materials for optoelectronic applications.