Power generation using an activated carbon and metal mesh cathode in a microbial fuel cell

An inexpensive activated carbon (AC) air cathode was developed as an alternative to a platinum-catalyzed electrode for oxygen reduction in a microbial fuel cell (MFC). AC was cold-pressed with a polytetrafluoroethylene (PTFE) binder to form the cathode around a Ni mesh current collector. This cathode construction avoided the need for carbon cloth or a metal catalyst, and produced a cathode with high activity for oxygen reduction at typical MFC current densities. Tests with the AC cathode produced a maximum power density of 1220 mW/m² (normalized to cathode projected surface area; 36 W/m³ based on liquid volume) compared to 1060 mW/m² obtained by Pt catalyzed carbon cloth cathode. The Coulombic efficiency ranged from 15% to 55%. These findings show that AC is a cost-effective material for achieving useful rates of oxygen reduction in air cathode MFCs.     

Micron-particulate crystalline hexagonal aluminium nitride: a novel, efficient and versatile heterogeneous catalyst for the synthesis of some heterocyclic compounds

The present work reports the application of micron-particulate crystalline hexagonal aluminium nitride/aluminium as a novel, mild acidic and reusable solid heterogeneous catalyst in organic synthesis. The catalyst was synthesized by thermal plasma technique and characterized using X-ray diffractometer and scanning electron microscopy. It catalyzes efficiently many organic transformations such as the synthesis of heterocyclic compounds 2,4,5-triaryl-substituted imidazoles and 2-aryl benzimidazoles.     

Analysis of viscoelastic behavior and dynamic mechanical relaxation of copolyester based layered silicate nanocomposites using Havriliak–Negami model

The solid‐state viscoelastic properties are examined for intercalated nanocomposites based on a copolyester and (2‐ethyl‐hexyl)dimethyl hydrogenated‐tallow ammonium montmorillonite. The nanocomposites are prepared via the direct melt intercalation technique using a conventional twin‐screw extruder. Dynamic mechanical thermal analysis of the nanocomposites is conducted using two different test setups. The dynamic mechanical relaxation spectra show an increase in the storage modulus of the nanocomposite over the entire temperature range under study as compared to the pristine polymer (except in the transition region from 70 to 80 °C). These results are analyzed using the empirical Havriliak–Negami (HN) equation. The four temperature independent HN parameters (α, β, E₀, and E_∞) and one temperature dependent parameter (τ, the relaxation time) are determined by solving the HN equation for each temperature over the range of temperatures. The calculated moduli results fit well with the experimental values of the relaxation spectra for the nanocomposites. This study shows that the HN model can be applied to polymer layered silicate nanocomposites, and it can be used to predict their dynamic mechanical properties over a wide range of temperatures and frequencies a priori. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2657–2666, 2004     

Calorimetric study of laser-irradiated thin foil targets

Hydrodynmaic efficiency of laser-irradiated thin aluminum and gold-coated aluminum targets was experimentally determined using a specially designed cone calorimeter. Velocity of the accelerated target and ablation pressure were also estimated from the experimental data. The laser irradiance range used in the experiments was between 10¹² and 10¹³ watts/cm². Experiments indicate that the fall in the hydrodynamic efficiency due to gold coating on aluminum target is about 12% at an irradiance of 8 × 10¹² W/cm².     

Radon activity and exhalation rates measurements in fly ash from a thermal power plant

Radon exhalation rate from fly ash samples and from the homogeneous mixture of fly ash of different proportions additive in soil and cement samples to study the effect of the addition was measured by cup dosimeter using SSNTDs. Radon activities were found to vary from (1018±38) to ( whereas the radon exhalation rate varied from (366±14) to . A gradual increase has been observed in samples having fly ash as an additive in cement samples whereas a gradual decrease was observed in soil samples after the addition of fly ash. ²³⁸U in fly ash was measured by a low-level NaI (Tl)-based gamma ray spectrometer. The results show enhancement in U concentration in fly ash as compared to coal samples, whereas radon exhalation rate is less in fly ash samples.     

Diselenophosphate‐Induced Conversion of an Achiral [Cu20H11{S2P(OiPr)2}9] into a Chiral [Cu20H11{Se2P(OiPr)2}9] Polyhydrido Nanocluster

A polyhydrido copper nanocluster, [Cu₂₀H₁₁{Se₂P(OiPr)₂}₉] ( 2_H ), which exhibits an intrinsically chiral inorganic core of C₃ symmetry, was synthesized from achiral [Cu₂₀H₁₁{S₂P(OiPr)₂}₉] ( 1_H ) of C_3h symmetry by a ligand‐exchange method. The structure has a distorted cuboctahedral Cu₁₃ core, two triangular faces of which are capped along the C₃ axis, one by a Cu₆ cupola and the other by a single Cu atom. The Cu₂₀ framework is further stabilized by 9 diselenophosphate and 11 hydride ligands. The number of hydride, phosphorus, and selenium resonances and their splitting patterns in multinuclear NMR spectra of 2_H indicate that the chiral Cu₂₀H₁₁ core retains its C₃ symmetry in solution. The 11 hydride ligands were located by neutron diffraction experiments and shown to be capping μ₃‐H and interstitial μ₅‐H ligands (in square‐pyramidal and trigonal‐bipyramidal cavities), as supported by DFT calculations on [Cu₂₀H₁₁(Se₂PH₂)₉] ( 2_H′ ) as a simplified model.