Crystalline Divinyldiarsenes and Cleavage of the As=As Bond

The first divinyldiarsenes [{(NHC)C(Ph)}As]₂ (NHC=IPr 3 a , SIPr 3 b ; IPr=C{(NAr)CH}₂; SIPr=C{(NAr)CH₂}₂; Ar=2,6-iPr₂C₆H₃) are reported. Compounds 3 a and 3 b were prepared by the reduction of corresponding chlorides {(NHC)C(Ph)}AsCl₂ (NHC=IPr 2 a , SIPr 2 b ) with Mg. Calculations revealed a small HOMO–LUMO energy gap of 3.86 ( 3 a ) and 4.24 eV ( 3 b ). Treatment of 3 a with (Me₂S)AuCl led to the cleavage of the As=As bond to restore 2 a , which is expected to proceed via the diarsane [{(IPr)C(Ph)}AsCl]₂ ( 4 ). Remarkably, 4 as well as 2 a can be selectively accessed on treatment of 3 a with an appropriate amount of C₂Cl₆. Moreover, 3 a readily reacts with PhEEPh (E=Se or Te) at room temperature to give {(IPr)C(Ph)}As(EPh)₂ (E=Se 5 a ; Te 5 b ), revealing the cleavage of As=As and E−E bonds and the formation of As−E bonds. Such highly selective stepwise oxidation ( 3 a → 4 → 2 a ) and bond metathesis ( 3 a → 5 a , b ) reactions are unprecedented in main-group chemistry.     

Alkyne Versus Ynamide Reactivity: Regioselective Radical Cyclization of Yne‐Ynamides

Ynamides are typically more reactive than simple alkynes and olefins. However, a serendipitous observation revealed a rare case where the reactivity of simple alkynes exceeds that of ynamides. This led to the development of a unique sulfur‐radical‐triggered cyclization of yne‐tethered ynamides, which involves attack of the alkyne by a thiyl radical followed by cyclization with the ynamide. A wide range of novel 4‐thioaryl pyrroles that could tolerate common functional moieties and N‐protecting groups were expediently constructed by this strategy. The current method contrasts with the typical cyclization of yne‐ynamides, which involves the attack of the alkyne moiety by the ynamide core. Control experiments and DFT calculations supported the participation of the sulfur radical in the reaction and the regioselective cyclization. The synthetic potential of the substituted pyrroles is also discussed.     

Calix[4]arene‐Based Bis(Nitric Oxide) Complexes: Synthesis,Physical Properties,and Structural Characterization

Calix[4]arene‐based molecules hold great promise as candidate sensors and storage materials for nitric oxide (NO), owing to their unprecedented binding affinity for NO. However, the structure of calix[4]arene is complicated by the availability of four possible conformers: 1,3‐alternate, 1,2‐alternate, cone, and partial cone (paco). Whilst complexes of NO with several of these conformers have previously been established, the 1,2‐alternate conformer complex, that is, [1,2‐alter ? NO]⁺, has not been previously reported. Herein, we determine the crystal structure of the NO complex with the 1,2‐alternate conformer for the first time. In addition, we have also found that the 1,2‐alternate and 1,3‐alternate conformers can combine with two NO molecules to form stable bis(nitric oxide) complexes. These new complexes, which exhibit remarkable binding capacity for the construction of NO‐storage molecules, were characterized by using X‐ray crystallography and NMR, IR, and UV/Vis spectroscopy. These findings will extend our understanding of the interactions between nitric oxide and cofacially and non‐cofacially arrayed aromatic rings, and we expect them to aid in the design and development of new supramolecular sensors and storage materials for NO with high capacity and efficacy.     

Flow linear dichroism to probe binding of aromatic molecules and DNA to single-walled carbon nanotubes

Structures of carbon nanotube/ligand complexes were studied by flow linear dichroism (the differential absorption of light polarized parallel and perpendicular to the flow orientation direction) with the aim of establishing linear dichroism as a technique to study such systems. Anthracene, naphthalene, and DNA were chosen as ligands, and the potential for flow linear dichroism to probe ligands noncovalently (as well as covalently) bound to single-walled nanotubes is reported. Linear dichroism enables the determination of approximate orientations of the ligands on the carbon nanotubes.     

Charge transfer excitations in cofacial fullerene-porphyrin complexes

Porphyrin and fullerene donor-acceptor complexes have been extensively studied for their photo-induced charge transfer characteristics. We present the electronic structure of ground states and a few charge transfer excited states of four cofacial porphyrin-fullerene molecular constructs studied using density functional theory at the all-electron level using large polarized basis sets. The donors are base and Zn-tetraphenyl porphyrins and the acceptor molecules are C(60) and C(70). The complexes reported here are non-bonded with a face-to-face distance between the porphyrin and the fullerene of 2.7 to 3.0 A?. The energies of the low lying excited states including charge transfer states calculated using our recent excited state method are in good agreement with available experimental values. We find that replacing C(60) by C(70) in a given dyad may increase the lowest charge transfer excitation energy by about 0.27 eV. Variation of donor in these complexes has marginal effect on the lowest charge transfer excitation energy. The interfacial dipole moments and lowest charge transfer states are studied as a function of face-to-face distance.     

Synthesis,Characterization and Catalytic Behaviour of Silica Supported Zinc Salicylaldimine Complex

Zinc salicylaldimine complex immobilized on silica gel was used as a promising catalyst for the transesterification reaction of dimethyl terephthalate (DMT) and ethylene glycol (EG).The catalyst was characterized by Fourier transform infra‐red spectroscopy (FT‐IR), thermogravimetric analysis (TGA) and atomic absorption spectroscopy (AAS). The product bis‐(2‐hydroxyethyl)terephthalate (BHET)was confirmed by mass and ¹H‐NMR studies. In comparison to zinc acetate i.e., homogeneous catalyst, a polymer supported catalyst showed better stability, catalytic activity and ease of separation from the reaction product. The catalyst can be reutilized during successive catalytic cycles.     

Syntheses of 1,5-Benzothiazepines-Part XXXI: Syntheses and Antimicrobial Studies of 10-Substituted-7- (monochlorophenyl/dichlorophenyl)-6H-6a,7-dihydro-6-phenyl[1]benzopyrano[3,4-c]-[1,5]benzothiazepines

Abstract

Two flavindogenides, 3-(2-chlorobenzylidene)-flavanone and 3-(2,4-dichloro- benzylidene)-flavanone reacted with six 5-substituted-2-aminobenzenethiols, the substituents being fluoro, chloro, bromo, methyl, methoxyl, and ethoxyl, to give respective 12 new compounds, 10-substituted-7-(2-chlorophenyl/2,4-dichlorophenyl)- 6H-6a,7-dihydro-6-phenyl[1]benzopyrano[3,4?c][1,5]benzothiazepines (5a–l) in 60–70% yields. The products were characterized on the basis of microanalytical data for elements and IR, ¹ H, and ¹³ C NMR and mass spectral studies. All the synthesized compounds were evaluated for their antimicrobial activity against the bacteria,Escherichia coli and GFC,and the fungi,Aspergillus niger, Aspergillus flavus,and Curvularia lunata.     

Volatile constituents of Origanum vulgare L., 'thymol' chemotype: variability in North India during plant ontogeny

Essential oils derived from six different phenophases, namely early vegetative stage, late vegetative stage, early flowering stage, full flowering stage (FFS), late flowering stage and seed shattering stage of Origanum vulgare L. grown in Kumaon region of Uttarakhand, India were investigated by GC and GC-MS. A total of 38 constituents, representing 97.4-99.7% of the total oil composition, were identified. Major components of oils were thymol (40.9-63.4%), p-cymene, (5.1-25.9%), γ-terpinene (1.4-20.1%), bicyclogermacrene (0.2-6.1%), terpinen-4-ol (3.5-5.9%), α-pinene (1.6-3.1%), 1-octen-3-ol (1.4-2.7%), α-terpinene (1.0-2.2%), carvacrol (<0.1-2.1%), β-caryophyllene (0.5-2.0%) and β-myrcene (1.2-1.9%). Thymol, terpinen-4-ol, 3-octanol, α-pinene, β-pinene, 1,8-cineole, α-cubebene and (E)-β-ocimene were observed to be higher during FFS. The study showed that plant stage had a significant effect on the essential oil content and composition of O. vulgare grown in the hilly tracks of Northern India.     

Green Oxidation of Methylarenes to Benzoic Acids with Bromide/Bromate in Water

An efficient and convenient procedure has been developed for the oxidation of methylarenes to the corresponding benzoic acids using a bromide/bromate-based reagent system in water. Regeneration and reusability of the bromide/bromate reagent is demonstrated.     

A Convenient Method of Benzylic Oxidation with Pyridinium Chlorochromate

Oxidation of indans and tetralin derivatives to their corresponding indanones and tetralones is of considerable value i n organic synthesis and many methods have been reported for accomplishing this conversion. Traditionally these oxidations are performed with chromic acid in acetic acid and the yields in general are moderate. Recently Eisenbraun4 has studied indetail the benzylic oxidation with the Jones reagent and compared the selectivity and yield of oxidation with other chromium(V1) reagents like bipyridinim chlorochrmate, (BiPCC). It was found that there was no improvement in yield and in the case of BiPCC a molar ratio 16% 1 (oxidant: substrate) was employed to get