Direct episulfidation of alkenes and allenes with elemental sulfur and thiiranes as sulfur sources,catalyzed by molybdenum oxo complexes

The molybdenum oxo complexes 1a and 1b catalyze efficiently the sulfur transfer to a series of alkenes 4 and allenes 6, for which elemental sulfur, phenylthiirane, or methylthiirane have been employed as sulfur sources to afford the corresponding episulfides 5 and 7. The most effective catalytic episulfidation system to date is the combination of the dithiophosphate-ligated oxo complex 1b and phenylthiirane (Ibeta). This metathesis process is efficient enough to convert usually reluctant alkenes (cyclopentene, cycloheptene, Z-cyclooctene, Z-cyclononene, E-cyclodecene, norbornene, and even bicyclopropylidene) to their episulfides in good yields under mild conditions. The direct catalytic sulfuration of allenes (cyclonona-1,2-diene, cyclonona-1,2,5-triene, cyclodeca-1,2-diene, and 2,4-dimethylpenta-2,3-diene) to their labile methylenethiiranes is unprecedented.     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

Redox site confinement in highly unsymmetric dimanganese complexes

A set of highly preorganized pyrazolate-bridged dimanganese complexes L(Mn)MnX have been prepared and structurally characterized. They can be described as hybrid organometallic/Werner-type systems that consist of a low-spin CpMn(I)(CO)2 subunit (Mn1) and a proximate tripodal tetradentate {N4} binding pocket accommodating a high-spin Mn(II) ion (Mn2), with Mn...Mn distances of approximately 4.3 A and different coligands bound to Mn2. Density functional theory (DFT) calculations (both the hybrid B3LYP and the pure BP86 functionals and the all-electron basis sets 6-311G and 6-311G*) confirm that the valence alpha and beta Kohn-Sham molecular orbitals (MOs) of these mixed-valent Mn(I)Mn(II) compounds have predominant Mn(3d) character and an almost perfectly localized nature: all five unpaired electrons are essentially localized at the Werner-type Mn2, whereas Mn1 possesses an effective closed-shell structure with the MOs of highest energy centered there. One-electron oxidation occurs in a clean process at approximately E(1/2) = -0.6 V (versus ferrocene/ferrocinium), giving the low-spin/high-spin Mn(II)Mn(II) species. UV/vis and IR spectroelectrochemistry as well as a detailed theoretical analysis reveal that the redox process takes place with strict site control at the organometallic subunit, while it does not significantly influence the spin and charge distribution on the Werner-type site. Positions and shifts of the nu(C[triple bond]O) absorptions are largely reproduced by the DFT calculations. These systems thus represent an exceptional example of the effect the unsymmetry of a dinucleating ligand scaffold has on the spin and charge distribution in homobimetallic complexes and might offer interesting prospects for the study of the cooperative effects of bimetallic arrays.     

Standardisierung der dünnschichtchromatographischen Trennungen von Flechtensäuren zur Chemotaxonomie von Flechten

Zusammenfassung Die dünnschichtchromatographische Trennung von Flechtenextrakten zur Unterstützung der Taxonomie wurde in Bezug auf die Trennleistung und auf die Reproduzierbarkeit optimiert. Dabei wurden besonders gute Trennleistungen erhalten mit dem Flie?mittelgemisch Benzol:Dioxa:Eisessig=90∶25∶4 bei Verwendung von Kieselgel, dessen Aktivit?t durch eine Umgebung mit relativer Feuchte von 70% festgelegt wurde, und mit Methylenchlorid als Eluiermittel bei Verwendung von mit Oxals?ure impr?gniertem Kieselgel und antiparallelem Aktivit?tsgradienten. Eine hohe Reproduzierbarkeit der Trennungen wurde erreicht durch Verwendung der Vario-KS-Kammer nach Geiss, die die Einstellung einer definierten Schichtaktivit?t bzw. eines definierten Aktivit?tsgradienten und eine reproduzierbare Vorbedampfung der Schicht mit Flie?mittel erm?glicht. Es konnte gezeigt werden, da? durch unterschiedliche chromatographische Trennungen der gleichen Extrakte und durch die Verwendung verschiedener Anf?rbereagenzien die Identifizierung und damit die Aussagekraft für taxonomische Probleme steigt.

---

Standardisation of the thin-layer chromatographic separation of lichen acids for the chemotaxonomy of lichens

Summary The thin-layer chromatography of lichen extracts for taxonomic studies has been optimized in relation to separation and to reproducibility. Especially good separations were found with benzene:dioxane:acetic acid (90∶25∶4) developer and silica gel thin-layer plates, whose activity was fixed by an ambient moisture content of 70%, and with methylene chloride developer and silica gel plates impregnated with oxalic acid and antiparallel activity gradient. High reproducibility of separation was obtained using the Geiss Vario-KS tank, which allows the activity of the plates or the activity gradient to be adjusted and which also allows reproducible exposure of plates to the vapour of developing solvents. By different chromatographic separations of the same extracts and by using different colour reactions the accuracy of identification for taxonomic studies has been improved.

     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

A maximum likelihood estimator to distinguish single molecules by their fluorescence decays

We have developed a maximum likelihood estimator to distinguish between similar molecules at the single molecule level based upon fluorescence decay measurements. Time resolved fluorescence measurements for single Rhodamine 6G and tetramethylrhodamine isothiocyanate molecules in fluid flow are derived from time-correlated single photon counting. A maximum likelihood estimator is developed and applied to data from a mixture of molecules. Single molecules are identified and distinguished by their fluorescence time decays. Comparison is made between identification error rates and theoretical predictions. To our knowledge, this is the first reported example of single molecule identification by fluorescence decay in a mixture.     

Novel spectroscopic effects in molecular transitions involving degenerate electronic states

We discuss the intricate Jahn—Teller-like and non-Jahn—Teller spectroscopic patterns which result via the recently revealed cross-quadratic terms involves modes of different symmetry which arise in the nuclear potential of degenerate electronic states of non-linear molecules.