Residue level and dissipation pattern of lepimectin in shallots using high‐performance liquid chromatography coupled with photodiode array detection

Lepimectin, as an emulsifiable concentrate, was sprayed on shallots at the recommended dose rate (10 mL/20 L) to determine its residue levels, dissipation pattern, pre‐harvest residue limits (PHRLs), and health risk. Samples were randomly collected over 10 days, extracted with acetonitrile, purified using an amino solid‐phase extraction (NH₂‐SPE) cartridge and analyzed using a high‐performance liquid chromatography–photodiode array detection method. Field‐incurred samples were confirmed using ultra‐performance liquid chromatography–tandem mass spectrometry. The linearity was excellent, with a determination coefficient (R²) of ≥0.9991. The recoveries at two spiking levels (0.2 and 1.0 mg/kg) ranged from 84.49 to 87.64% with relative standard deviations of ≤7.04%. The developed method was applied to field samples grown in separate greenhouses, one located in Naju and one in Muan, in the Republic of Korea. The dissipation pattern was described by first‐order kinetics with half‐lives of 1.9 (Naju) and 1.7 days (Muan). The PHRL curves indicated that, if the lepimectin residues are <0.18 (Naju) and <0.13 mg/kg (Muan) 5 days before harvest, the residue levels will be lower than the maximum residue limit (0.05 mg/kg) upon harvesting. The risk assessment data indicated that lepimectin is safe for use in the cultivation of shallots, with no risk of detrimental effects to the consumer.     

High pressure studies on the electrical resistivity of Ge–Te–Tl glasses

The variation of electrical resistivity in the system of glasses Ge₁₇Te_83?xTl_x, with (1≤x≤13), has been studied as a function of high pressure for pressures up to 10 GPa. It is found that the normalized electrical resistivity decreases continuously with the increase in pressure and shows a sudden drop at a particular pressure (transition pressure), indicating the presence of a transition from semiconductor to near-metallic at these pressures which are in the range 3.0–5.0 GPa. This transition pressure is seen to decrease with the increase in the percentage content of thallium due to increasing metallicity of the thallium. The transition is reversible under application of pressure and X-ray diffraction of samples recovered after pressurization show that they remain amorphous after undergoing a pressurization decompression cycle.     

Design and characterization of single mode circular photonic crystal fiber for broadband dispersion compensation

In this paper, we present a single mode circular photonic crystal fiber (C-PCF) for broadband dispersion compensation covering 1400 to 1610 nm wavelength band over the telecommunication windows. Investigations of guiding properties are carried out using finite element method (FEM) with circular perfectly matched layer boundary condition. Numerical study reveals that a negative dispersion coefficient of about −386.57 to −971.44 ps/(nm km) is possible to obtain over the wavelength ranging from 1400 to 1610 nm with a relative dispersion slope (RDS) of about 0.0036 nm⁻¹ at 1550 nm wavelength. In addition, the single mode behaviour of C-PCF is demonstrated by employing V parameter. According to simulation, it is found that the proposed C-PCF acts as a single mode fiber within 1340 to 1640 nm wavelength. Moreover, effective dispersion, relative dispersion slope, birefringence and confinement loss are also presented and discussed.     

Blood flow of Jeffrey fluid in a catherized tapered artery with the suspension of nanoparticles

Current letter deals with the mathematical models of Jeffrey fluid via nanoparticles in the tapered stenosed atherosclerotic arteries. The convection effects of heat transfer with catheter are also taken into account. The nonlinear coupled equations of nanofluid model are simplified under mild stenosis. The solutions for concentration and temperature are found by using homotopy perturbation method, whereas for velocity profile the exact solution is calculated. Moreover, the expressions for flow impedance and pressure rise are computed and discussed through graphs for different physical quantities of interest. The streamlines have also been presented to discuss the trapping bolus discipline.     

On the quantum link for transport of logic states

A novel approach for representing logic states in the quantum nodes and transferring the states from one node to another is proposed. Both transmit and receive nodes consist of a rubidium atom (⁸⁷Rb) placed at the center of a two-mode cavity. Representation of logic states by two subspaces of the space of ⁸⁷Rb atom hyperfine states eliminates the need for the transmitting node to change logic state during logic transfer through Raman process. The atom is excited by simultaneous application of two laser beams - one for each subspace. Based on the logic state, the atom emits a photon of appropriate frequency and polarization through Raman process within the corresponding subspace. The emitted photon leaks out of the cavity, reaches the receiving node, and initiates logic dependent transitions there. A simulation platform is developed through the system Hamiltonians for transmit and receive nodes followed by the formulation of the time evolution of the density matrices for the nodes. The efficacy of the simulation approach is emphasized.     

Towards a novel simulation approach for the transport of atomic states through polarized photons

A novel approach for transferring logic states from one quantum node to other is proposed. Logic states ‘0’ and ‘1’ are represented by two subspaces of the hyperfine states space of rubidium atom (⁸⁷Rb). The atom, placed at the center of a two-mode cavity, is excited by simultaneous application of two laser beams, one for each subspace. Based on the logic state of the atom, it makes a transition to a higher energy level within the corresponding subspace. When the atom relaxes back to a lower state within the subspace, a left- or right-circularly polarized photon is emitted depending on whether the initial state was logic ‘0’ or logic ‘1’. The polarized photon leaks out of the cavity, reaches the receive node and gets detected therein. Simulation results show the efficacy of the approach.     

Effects of nozzles array configuration on cross-talk in multi-nozzle electrohydrodynamic inkjet printing head

This paper presents the analysis of a triangular array of nozzles in a multi-nozzle electrohydrodynamic (EHD) inkjet printing head. A methodology has been proposed to minimize the “end effect” by changing the traditional linear array of nozzles to triangular array of nozzles in multi-nozzle EHD printing head. Interaction (cross-talk) between the electrically charged neighboring jets is investigated and analyzed both numerically and experimentally using three glass nozzles with independent voltage connections and independent ink supply to each nozzle. In order to scrutinize the performance of triangular array multi-nozzle EHD inkjet printing head, comparative study of triangular array multi-nozzle EHD inkjet printing head to the linear array multi-nozzle EHD inkjet printing head has been made on the basis of electric field simulations and experiments. Experimental results illustrate that in triangular array multi-nozzle EHD inkjet printing head, the over potential requirement is low and individual capillaries are operating with more independence as compared to linear array multi-nozzle EHD inkjet printing head.     

String Theory and the Velo–Zwanziger problem

We examine the behavior of the leading Regge trajectory of the open bosonic string in a uniform electromagnetic background and present a consistent set of Fierz–Pauli conditions for these symmetric tensors that generalizes the Argyres–Nappi spin-2 result. These equations indicate that String Theory does bypass the Velo–Zwanziger problem, i.e. the loss of causality experienced by a massive high-spin field minimally coupled to electromagnetism. Moreover, we provide some evidence that only the first Regge trajectory can be described in isolation and show that the open-string spectrum is free of ghosts in weak constant backgrounds. Finally, we comment on the roles of the critical dimension and of the gyromagnetic ratio.     

Fabrication of chloroform sensor based on hydrothermally prepared low-dimensional β-Fe2O3 nanoparticles

Hydrothermally prepared as-grown low-dimensional nano-particles (NPs) have been characterized using UV–vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and electron dispersion spectroscopy (EDS). The uniformity of the nano-material was executed by the scanning electron microscopy, where the single phase of the nano-crystalline β-Fe₂O₃ was characterized using XRD techniques. β-Fe₂O₃ nanoparticles fabricated glassy carbon electrode (GCE) have improved chloroform-sensing performances in terms of electrical response (I–V technique) for detecting analyte in liquid phase. The analytical performances were investigated, which showed that the better sensitivity, stability, and reproducibility of the sensor improved significantly by using Fe₂O₃ NPs thin-film on GCE. The calibration plot was linear (R = 0.9785) over the large range of 12.0 μM to 12.0 mM. The sensitivity was calculated as 2.1792 μA cm⁻² mM⁻¹ with a detection limit of 4.4 ± 0.10 μM in short response time (10.0 s).     

Gabedit—A graphical user interface for computational chemistry softwares

Gabedit is a freeware graphical user interface, offering preprocessing and postprocessing adapted (to date) to nine computational chemistry software packages. It includes tools for editing, displaying, analyzing, converting, and animating molecular systems. A conformational search tool is implemented using a molecular mechanics or a semiempirical potential. Input files can be generated for the computational chemistry software supported by Gabedit. Some molecular properties of interest are processed directly from the output of the computational chemistry programs; others are calculated by Gabedit before display. Molecular orbitals, electron density, electrostatic potential, nuclear magnetic resonance shielding density, and any other volumetric data properties can be displayed. It can display electronic circular dichroism, UV–visible, infrared, and Raman‐computed spectra after a convolution. Gabedit can generate a Povray file for geometry, surfaces, contours, and color‐coded planes. Output can be exported to a selection of popular image and vector graphics file formats; the program can also generate a series of pictures for animation. Quantum mechanical electrostatic potentials can be calculated using the partial charges on atoms, or by solving the Poisson equation using the multigrid method. The atoms in molecule charges can also be calculated. Gabedit is platform independent. The code is distributed under free open source X11 style license and is available at http://gabedit.sourceforge.net/ . © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010