The dispersion relation of the charge and current compensated relativistic electron beam-plasma system

Analysing the general dispersion relation numerically, the unstable regions of the relativistic electron-beam plasma system were determined. The external parameters were varied to ensure more effective instability excitations. The full charge and current compensation presumptions lead to new synchronism predictions. The return current's slow space charge wave and return current's slow cyclotron wave are synchronous with the plasma ion wave.     

Application of the JKR Method to the Measurement of Adhesion to Langmuir-Blodgett Cellulose Surfaces

The JKR method has been applied for studying adhesion between poly(dimethylsiloxane) (PDMS) caps and Langmuir–Blodgett cellulose surfaces including the substrate, hydrophobized mica, and two flat mineral surfaces, bare mica and glass. The self-adhesion of PDMS caps and oxidized PDMS caps are included as a reference to compare with literature data. The results of the measurements have been compared with previous studies using the surface force apparatus and similar systems. A satisfactory agreement is obtained for simple systems showing no, or very limited, hysteresis between loading and unloading curves. In several cases, however, a large hysteresis is found between loading and unloading curves, with a larger adhesion measured from the pull-off force than from the JKR-curve determined on loading. This is, for instance, the case for PDMS against cellulose. The situation is analogous to that found in wetting studies showing a large hysteresis between advancing and receding contact angles.     

Performance of an in-plane detection cell with integrated waveguides for UV/Vis absorbance measurements on microfluidic separation devices

A microfluidic device with integrated waveguides and a long path length detection cell for UV/Vis absorbance detection is presented. The 750 microm U-cell detection geometry was evaluated in terms of its optical performance as well as its influence on efficiency for electrophoretic separations in the microdevice. Stray light was found to have a strong effect on both, the sensitivity of the detection and the available linear range. The long path length U-cell showed a 9 times higher sensitivity when compared to a conventional capillary electrophoresis (CE) system with a 75 microm inner diameter (ID) capillary, and a 22 times higher sensitivity than with a 50 microm ID capillary. The linear range was comparable to that achieved in a 75 microm ID capillary and more than twice as large as in a 50 microm ID capillary. The use of the 750 microm U-cell did not contribute significantly to band broadening; however, a clear quantification was made difficult by the convolution of several other band broadening sources.     

Beiträge zur Chemie der Pyrrolpigmente, 78. Mitt.: Die Eigenschaften desb-Nor-bilatrien-abc-b-Nor-biladien-ac-Systems

The redox coupleb-nor-biladiene-ac (2)/b-nor-bilatriene-abc (3) exhibits an oxidative half wave potential of 800 mV in acetonitrile solution. It is demonstrated that it can be used as an extremely efficient electron carrier through bulk membranes. Whereas2 is not suitable as a ligand in carrier mediated cation transport,3 is a medium suited carrier for Cu(II) or Zn(II) ions, however, it is the most efficient one found so far for transport of Hg(II) ions. A 1:1 zinc chelate of3 is isolated and characterized. it is deduced to represent a polymer consisting of about 73 monomer units.

     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

Dispersed fluorescence spectroscopy of primary and secondary alkoxy radicals

Dispersed fluorescence (DF) spectra of 1-propoxy, 1-butoxy, 2-propoxy, and 2-butoxy radicals have been observed under supersonic jet cooling conditions by pumping different vibronic bands of the B-X laser induced fluorescence excitation spectrum. The DF spectra were recorded for both conformers of 1-propoxy, three conformers of the possible five of 1-butoxy, the one possible conformer of 2-propoxy, and two conformers of the possible three of 2-butoxy. Analysis of the spectra yields the energy separations of the vibrationless levels of the ground X and low-lying A electronic state as well as their vibrational frequencies. In all cases, the vibrational structure of the DF spectra is dominated by a CO stretch progression yielding the nuCO stretching frequency for the X state and in most cases for the A state. In addition to the experimental work, quantum chemical calculations were carried out to aid the assignment of the vibrational levels of the X state and for some conformers the A state as well. Geometry optimizations of the different conformers of the isomers were performed and their energy differences in the ground states were determined. The results of the calculation of the energy separations of the close-lying X and A states of the different conformations are provided for comparison with the experimental observations.     

Hydrogen bond studies: Part 118. A deuteron magnetic resonance study of BeSO4· 4D2O and Li2SO4· D2O

The electric field gradient (EFG) tensors at the deuterons in the water molecules in BeSO₄ · 4D₂O at 25°C are reported. The quadrupole coupling constants (e²Q/h) and asymmetry parameters (η) for the two independent deuterons are 181.1(4) and 194.8(3) kHz, and 0.226(4) and 0.123(3), respectively. The EFG tensor corresponding to the smallest e²qQ/h is considerably distorted by the beryllium ion, which causes a high η value as well as a deviation of the y-principal axis by 21.8(6)° from the normal to the water molecule plane. A redetermination of the EFG tensors at the deuterons in the water molecule in Li₂SO₄ · D₂O at 25°C and ?110°C is also reported. The e²Q/h and η values for the two deuterons are 236.6(1.2) and 239.8(1.1) kHz, and 0.091(8) and 0.126(7), respectively, at ?110°C. The corresponding e²qQ/h and η values for the averaged EFG tensor at 25°C are 125.8(1.1) kHz and 0.813(13), respectively. The results are in good agreement with those from the pioneer work by Ketudat and Pound, 20 years ago on the same compound.     

Molecular structure of ethynylbenzene from electron diffraction and ab initio molecular orbital calculations

The molecular structure and benzene ring distortions of ethynylbenzene have been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF/6-31G^* and 6-3G^** levels. Least-squares refinement of a model withC _2v, symmetry, with constraints from the MO calculations, yielded the following important bond distances and angles:r _g(C _i -C _o )=1.407±0.003 Å,r _g(C _o -C _m )=1.397±0.003 Å,r _g(C _m -C _p )=1.400±0.003 Å,r _g(Cr _i -CCH)=1.436 ±0.004 Å,r _g(C=C)=1.205±0.005 Å, C _o -C _i -C _o =119.8±0.4°. The deformation of the benzene ring of ethynylbenzene given by the MO calculations, including o-C_i-C_o=119.4°, is insensitive to the basis set used and agrees with that obtained by low-temperature X-ray crystallography for the phenylethynyl fragment, C₆H₅-CC-, in two different crystal environments. The partial substitution structure of ethynylbenzene from microwave spectroscopy is shown to be inaccurate in the ipso region of the benzene ring.     

Thermal stability of new zinc acetate-based complex compounds

New zinc acetate based complex compounds (of general formula Zn(CH₃COO)₂·1?2L·nH₂O) containing one or two molecules of urea, thiourea, coffeine and phenazone were prepared namely: Zn(CH₃COO)₂·2.5H₂O, Zn(CH₃COO)₂·2u·0.5H₂O, Zn(CH₃COO)₂·tu·0.5H₂O, Zn(CH₃COO)₂·2tu, Zn(CH₃COO)₂·cof·2.5H₂O, Zn(CH₃COO)₂·2cof·3.5H₂O, Zn(CH₃COO)₂·2phen·1.5H₂O. The compounds were characterized by IR spectroscopy, chemical analysis and thermal analysis. Thermal analysis showed that no changes in crystallographic modifications of the compounds take place during (heating in nitrogen before) the thermal decompositions. The temperature interval of the stability of the prepared compounds were determined. It was found that the thermal decomposition of hydrated compounds starts by the release of water molecules. During the thermal decomposition of anhydrous compounds in nitrogen the release of organic ligands take place followed by the decomposition of the acetate anion. Zinc oxide and metallic zinc were found as final products of the thermal decomposition of the zinc acetate based complex compounds studied. Carbon dioxide and acetone were detected in the gaseous products of the decomposition of the compounds if ZnO is formed. Carbon monoxide and acetaldehyde were detected in the gaseous products of the decomposition, if metallic Zn is formed. It is supposed that ZnO and Zn resulting from Zn acetate complex compounds here studied, possess different degree of structural disorder. Annealing takes place by further heating above 600°C.     

A 3D QSAR study on a set of dopamine D4 receptor antagonists

The molecular alignments obtained from a previously reported pharmacophore model have been employed in a three-dimensional quantitative structure-activity relationship (3D QSAR) study, to obtain a more detailed insight into the structure-activity relationships for D(2) and D(4) receptor antagonists. The frequently applied CoMFA method and the related CoMSIA method were used. Statistically significant models have been derived with these two methods, based on a set of 32 structurally diverse D(2) and D(4) receptor antagonists. The CoMSIA and the CoMFA methods produced equally good models expressed in terms of q(2) values. The predictive power of the derived models were demonstrated to be high. Graphical interpretation of the results, provided by the CoMSIA method, brings to light important structural features of the compounds related to either low- or high-affinity D(2) or D(4) antagonism. The results of the 3D QSAR studies indicate that bulky N-substituents decrease D(2) binding, whereas D(4) binding is enhanced. Electrostatically favorable and unfavorable regions exclusive to D(2) receptor binding were identified. Likewise, certain hydrogen-bond acceptors can be used to lower D(2) affinity. These observations may be exploited for the design of novel dopamine D(4) selective antagonists.