Characterization of poly(3,4-ethylenedioxythiophene):tosylate conductive polymer microelectrodes for transmitter detection

In this paper we investigate the physical and electrochemical properties of micropatterned poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:tosylate) microelectrodes for neurochemical detection. PEDOT:tosylate is a promising conductive polymer electrode material for chip-based bioanalytical applications such as capillary electrophoresis, high-performance liquid chromatography, and constant potential amperometry at living cells. Band electrodes with widths down to 3 μm were fabricated on polymer substrates using UV lithographic methods. The electrodes are electrochemically stable in a range between -200 mV and 700 mV vs. Ag/AgCl and show a relatively low resistance. A wide range of transmitters is shown to oxidize readily on the electrodes. Kinetic rate constants and half wave potentials are reported. The capacitance per area was found to be high (1670 ± 130 μF cm(-2)) compared to other thin film microelectrode materials. Finally, we use constant potential amperometry to measure the release of transmitters from a group of PC 12 cells. The results show how the current response decreases for a series of stimulations with high K(+) buffer.     

Substituent effects on the thermochemistry of thiophenes. a theoretical (G3(MP2)//B3LYP and G3) study

Very good linear correlations between experimental and calculated enthalpies of formation in the gas phase (G3(MP2)//B3LYP and G3) for 48 thiophene derivatives have been obtained. These correlations permit a correction of the calculated enthalpies of formation in order to estimate more reliable "experimental" values for the enthalpies of formation of substituted thiophenes, check the reliability of experimental measurements, and also predict the enthalpies of formation of new thiophenes that are not available in the literature. Moreover, the difference between the enthalpies of formation of isomeric thiophenes with the same substituent in positions 2 and 3 of the ring has been analyzed. Likewise, a comparison of the substituent effect in the thiophene and benzene rings has been established.     

Intramolecular [2+2] Photocycloaddition of 3‐ and 4‐(But‐3‐enyl)oxyquinolones: Influence of the Alkene Substitution Pattern,Photophysical Studies,and Enantioselective Catalysis by a Chiral Sensitizer

The intramolecular [2+2] photocycloaddition of four 4‐(but‐3‐enyl)oxyquinolones (substitution pattern at the terminal alkene carbon atom: CH₂, Z‐CHEt, E‐CHEt, CMe₂) and two 3‐(but‐3‐enyl)oxyquinolones (substitution pattern: CH₂, CMe₂) was studied. Upon direct irradiation at λ=300 nm, the respective cyclobutane products were formed in high yields (83–95 %) and for symmetrically substituted substrates with complete diastereoselectivity. Substrates with a Z‐ or E‐substituted terminal double bond showed a stereoconvergent reaction course leading to mixtures of regio‐ and diastereomers with almost identical composition. The mechanistic course of the photocycloaddition was elucidated by transient absorption spectroscopy. A triplet intermediate was detected for the title compounds, which–in contrast to simple alkoxyquinolones such as 3‐butyloxyquinolone and 4‐methoxyquinolone–decayed rapidly (τ≈1 ns) through cyclization to a triplet 1,4‐diradical. The diradical can evolve through two reaction channels, one leading to the photoproduct and the other leading back to the starting material. When the photocycloaddition was performed in the presence of a chiral sensitizer (10 mol %) upon irradiation at λ=366 nm in trifluorotoluene as the solvent, moderate to high enantioselectivities were achieved. The two 3‐(but‐3‐enyl)oxyquinolones gave enantiomeric excesses (ees) of 60 and 64 % at ?25 °C, presumably because a significant racemic background reaction occurred. The 4‐substituted quinolones showed higher enantioselectivities (92–96 % ee at ?25 °C) and, for the terminally Z‐ and E‐substituted substrates, an improved regio‐ and diastereoselectivity.     

Reductive Ring Opening of Ephedrine and Pseudo-Ephedrine-Derived Oxazolidinium Methiodides by Sodium Borohydride. A Direct Access to New Chiral Amine-Borane Adducts

Sodiun borohydride reacts with oxazolidinium methiodides derived from ephedrine and pseudoephedrine, in ethereal solvents, cleaving regioselectively the C-N bond of the ring and leading, in good yields, to chiral amine-borane adducts of know absolute configuration. The ¹HNMR data allow to predict the most stable conformation.     

Correction to: Synthesis and characterization of a biopolymer of glycerol and macadamia oil

Journal of Thermal Analysis and Calorimetry - In the original publication of the article, the Figures 6, 7, and 8 are in disagreement with their figure captions. Moreover, in the result...     

A mixed chloride/trifluoromethanesulfonate ligand species in a ruthenium(II) complex

The compound [2‐(aminomethyl)pyridine‐κ²N,N′][chlorido/trifluoromethanesulfonato(0.91/0.09)][(10,11‐η)‐5H‐dibenzo[a,d]cyclohepten‐5‐amine‐κN](triphenylphosphane‐κP)ruthenium(II) trifluoromethanesulfonate dichloromethane 0.91‐solvate, [Ru(CF₃SO₃)_0.09Cl_0.91(C₆H₈N₂)(C₁₅H₁₃N)(C₁₈H₁₅P)]CF₃SO₃·0.91CH₂Cl₂, belongs to a series of Ru^II complexes that had been tested for transfer hydrogenation, hydrogenation of polar bonds and catalytic transfer hydrogenation. The crystal structure determination of this complex revealed disorder in the form of two different anionic ligands sharing the same coordination site, which other spectroscopic methods failed to characterize. The reduced catalytic activity of the title compound was not fully understood until the crystallographic data provided evidence for the mixed ligand species. The crystal structure clearly shows that the majority of the synthesized material has a chloride ligand present. Only a small portion of the material is the expected complex [Ru^II(OTf)(ampy)(η²‐tropNH₂)(PPh₃)]OTf, where OTf is triflate or trifluoromethanesulfonate, ampy is 2‐(aminomethyl)pyridine and tropNH₂ is 5H‐dibenzo[a,d]cyclohepten‐5‐amine.     

Knowledge‐based choice of the initiator type for monomer removal by postpolymerization

The mechanisms involved in monomer removal by postpolymerization were investigated to establish a criterion to select the most effective initiator systems. Three redox systems yielding radicals of different hydrophobicities were studied. Efficiency in monomer removal by postpolymerization increased with the hydrophobicity of the radical formed from the initiator system. This result was independent of the water solubility of the residual monomer. The mechanistic reasons for this finding are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4245–4249, 2002     

Diblock copolymer–azobenzene complexes through hydrogen bonding: Self‐assembly and stable photoinduced optical anisotropy

We have demonstrated the preparation of a series of photoaddressable supramolecular block copolymers by mixing a carboxy‐terminated azobenzene derivative, 6‐[4‐(4′‐cyanophenylazo)phenyloxy]hexanoic acid (AZO), and two polystyrene‐b‐poly(4‐vinylpiridine) (PS‐b‐P4VP) block copolymers. AZO can be selectively attached to the P4VP block of PS‐b‐P4VP through hydrogen bonding interactions. The assembly of AZO with vinylpyridine group‐containing polymers was initially investigated on a model system composed of P4VP homopolymer and AZO. Homogeneous liquid crystalline materials were obtained for ratios of AZO to vinylpyridine repeating unit, x, lower or equal to 0.50. Mixtures with higher x resulted in heterogeneous materials showing clear macrophase separation. Accordingly, a series of hydrogen‐bonded complexes of PS‐b‐P4VP and AZO, PS‐b‐P4VP(AZO)_x, with x = 0.25 and x = 0.50 were prepared. Lamellar and spherical morphologies were observed for the complexes based on PS24‐b‐P4VP9.5 (M_n,PS = 24,000, M_n,P4VP = 9500) and PS24‐b‐P4VP1.9 (M_n,PS = 24,000, M_n,P4VP = 1900), respectively. Photoinduced orientation of the azobenzene units was obtained in films of P4VP(AZO)_x and PS‐b‐P4VP(AZO)_x with x = 0.25 and 0.50 by using 488 nm linearly polarized light and characterized through birefringence and dichroism measurements. This investigation shows a versatile and less laborious approach to azobenzene‐containing polymer materials with low chromophore content, of interest in optical application. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013