Analysis of endosulfan and its metabolites in human serum using gas chromatography-tandem mass spectrometry

A new analytical method combining solid-phase extraction and gas chromatography-tandem mass spectrometry (GC-MS-MS) is proposed to determine the insecticide endosulfan as well as its metabolites endosulfan-ether, -lactone, and -sulfate in human serum. Most matrix interferences are avoided using a cleanup step included in the sample treatment and an instrumental technique such as GC-MS-MS, which presents a high sensitivity and selectivity. Recoveries of spiked compounds range between 94.8 and 100.4% and 93.4 and 99.7% at fortification levels of 10 and 30 ng/mL, respectively. The relative standard deviation is lower than 17.6% in all cases, and the limits of detection calculated range from 6 to 19 pg/mL. Serum samples of nine agricultural workers that spray endosulfan into greenhouses in Almería (Spain) and two nonoccupationally exposed people are analyzed, and endosulfan is found in all the samples studied.     

Template-assisted self assembly of two lipophilic polyion aggregates derived from sodium tetraphenyl imidodiphosphinate-complexes containing sodium ions in four different coordination environments

The molecular structures of two lipophilic polyion aggregates derived from tetraphenyl imidodiphosphinate are described: [Na(crown ether)][MNa(2)[Ph(2)P(O)NP(O)Ph(2)](4)] with crown ether = 15-crown-5 for 1and benzo-15-crown-5 for (M = Na(+) for 1 and Na(H(2)O)(+) for 2).     

Glycosylation site analysis of human alpha-1-acid glycoprotein (AGP) by capillary liquid chromatography-electrospray mass spectrometry

A new anionic surfactant (RapiGest SF) was successfully used for site-specific analysis of glycosylation in human alpha-1-acid glycoprotein (AGP). By means of this analytical approach combined with capillary HPLC-mass spectrometry (and tandem mass spectrometry), the N-linked glycosylation pattern of AGP was explored. On the basis of mass matching and MS/MS experiments ca 80 different AGP-derived glycopeptides were identified. Glycosylation shows a markedly different pattern for the various glycosylation sites. At sites I and II, triantennary complex-type oligosaccharides predominate and at sites III, IV and V, tetra-antennary complex-type oligosaccharides predominate. Sites IV and V show the presence of additional N-acetyl lactosamine (Gal-GlcNAc) units (even higher degree of branching and/or longer antennae are also present).     

Bis(2,4,6-trifluorophenyl) derivatives of palladium(II)

Summary The organopalladium(II) complexes: Pd(2,4,6-C₆F₃H₂)₂L₂ [L=triphenylphosphine(PPh₃), methyldiphenylphosphine(PPh₂Me), dimethylphenylphosphine-(PPhMe₂) or pyridine(py); L₂=1,2-bis(diphenylphosphino)ethane(dpe), 2,2-bipyridine(bipy), 1, 10-phenanthroline(phen) or ethylenediamine(en)] have been prepared by addition of the appropriate compound to the THF-dioxane solution resulting from the arylation of potassium tetrachloropalladate(II) with (2,4,6-C₆F₃H₂)MgBr. The i.r. data suggest that the py and PPhMe₂ compounds are thecis-isomers, whereas the PPh₃ and PPh₂Me compounds have thetrans configuration.¹H- and¹⁹F-n.m.r. data for the compounds are reported.     

The direct detection of a hydrogen bond in the solid state by NMR through the observation of a hydrogen-bond mediated (15)N [bond] (15)N J coupling

A new method for detecting hydrogen bonds in the solid state is presented. Using two-dimensional NMR correlation experiments, it is shown that a hydrogen-bond mediated J coupling can be observed in a powder under magic-angle spinning conditions, even though the J coupling is 2 orders of magnitude smaller than the dominant anisotropic interactions encountered in solid-state NMR. Specifically, the observation of a pair of peaks in a two-dimensional 15N-15N solid-state INADEQUATE experiment due to two nitrogens that have no covalent connectivity is attributed to the presence of a J coupling across a linking hydrogen bond.     

Prediction of the behaviour of organic pollutants using cloud point extraction

A preconcentration study based on the cloud point phenomenon was carried out for a set of triazine herbicides, three of them chloro-substituted and three of them methylthio-substituted. Concentration factors and recoveries were calculated as function of the percentage of the non-ionic surfactant Triton X-114 employed. From these values, obtained from a cloud point extraction (CPE) procedure, the distribution coefficient between the Triton X-114 micelles and water, Kc, prior to CPE was calculated for each triazine and related to the corresponding octanol-water partition coefficient, Kow. In order to confirm the results obtained with the triazine herbicides, two sets of data from chemically different organic pollutants--organophosporous and chlorophenols--obtained from the literature were assessed, concluding that they display a similar behaviour to that of the triazine herbicides. This can be used to predict the CPE behaviour of other organic pollutants from their octanol-water partition coefficients. The Kc values were compared with the analyte concentration ratio in the surfactant-rich phase and aqueous phase (Ksa) with a view to obtaining a link between the analyte behaviour prior to and after cloud point extraction procedures.     

Global optimization of ionic Mg(n)F(2n) (n=1-30) clusters

The global optimization basin-hopping (BH) method has been used to locate the global minima (GM) of Mg(n)F(2n) (n=1-30) clusters using a Born-Mayer-type potential. Some of the GM were particularly difficult to find, requiring more than 1.5 x 10(4) BH steps. We have found that both the binding energy per MgF2 unit and the effective volume of the GM isomers increase almost linearly with n, and that cluster symmetry decreases with cluster size. The data derived from the BH runs reveal a growing density of local minima just above the GM as n increases. Despite this, the attraction basin around each GM is relatively large, since after all their atomic coordinates are randomly displaced by values as high as 2.0 bohrs, the perturbed structures, upon reoptimization, relax back to the GM in more than 50% of the cases (except for n=10 and 11). The relative stabilities derived from energy second differences suggest that n=8,10,13,15, and 20 are probably the magic numbers for these systems. Mass spectrum experiments would be very useful to clarify this issue.     

Screening the origin and weathering of oil slicks by attenuated total reflectance mid-IR spectrometry

The combination of attenuated total reflectance-fourier transform mid-infrared spectrometry (ATR-FTMIR) and multivariate pattern recognition is presented as a fast and convenient methodology to ascertain the source product an oil slick comes from and to evaluate the extent of its weathering. Different types of hydrocarbons (including crude oils, several heavy distillates and the Prestige's heavy fuel oil) were spilled on metallic containers designed ad hoc and their fate monitored by ATR-FTMIR. Not only environmental conditions were considered for weathering but artificial IR- and UV-irradiation. Pattern-recognition studies revealed that the different hydrocarbons clustered at different locations on the score plots and that the samples corresponding to each oil became ordered according to the extent of their weathering. Among them, fuel oil samples coming from the recent disaster of the Prestige tanker off the Galician shoreline showed a distinctive behaviour. Comparison of natural-, IR- and UV-weathering of a crude oil showed that IR solar radiation can be important in oil-weathering, in addition to broadly-reported UV degradation.     

Tandem on-line continuous separation and determination of arsenic by inductively coupled plasma atomic emission spectrometry

The principle of tandem on-line continuous separation techniques as an alternative means of introducing samples into plasmas was applied to the development of a sensitive, selective and convenient method for the determination of arsenic by inductively coupled plasma atomic emission spectrometry (ICP-AES). Arsenic is continuously extracted as AsI₃ into xylene from the sample dissolved in 0.1 M potassium iodide solution in 7.2 M hydrochloric acid. The xylene phase (containing the analyte) is continuously mixed on-line with NaBH₄ in dimethylformamide and acetic acid solutions. Arsine is thus continuously generated directly from the organic phase and is separated in a gas—liquid separation device which prevents most of the xylene phase vapour from reaching the ICP. The system was optimized for the continuous extraction of AsI₃, the direct generation of arsine from xylene and the final ICP determination of arsenic. Finally, the tandem on-line continuous separation ICP detection system was applied to the determination of arsenic in real samples (white metal, cast iron, cupro-nickel and orchard leaves standard materials). Very good agreement between the experimental results and the certified values was obtained.