The chemistry and the stereochemistry of poly(N-alkyliminoalanes) : V. The preparation and crystal structure of the pentamer [(HalN-i-Pr)2(H2AlNH-i-Pr)3]

The compound [(HAlN-i-Pr)₂(H₂AlNH-i-Pr)₃] has been prepared and the crystal and molecular structure determined by an X-ray analysis, carried out with three-dimensional data collected on a diffractometer. The molecule is made up of a cyclohexane-type ring, [(HAlN-i-Pr)₂(H₂AlNH-i-Pr)], in skewboat conformation, on each side of which is bonded an -H₂AlNH-i-Pr- bridging unit between a nitrogen atom and an aluminum atom of the ring. The molecule lies on a binary axis of the crystal, but this symmetry is fulfilled only by a statistical orientation of the asymmetric molecular units (the statistical model is not however completely defined). The AlN bond lengths range from 1.901 to 1.985 Å; the average NC bond length is 1.527(9) Å. Main crystal data are: monoclinic space group C2/c; a = 10.15(2), b = 21.64(3), c = 12.84(2) Å, β = 111.9(5)°; Z = 4; calculated density 1.095 g/cm³. The structure was solved by direct methods and block-matrix least-squares converged to an R value of 5.6%.     

Performance of a sound card as data acquisition system and a lock-in emulated by software in capillary electrophoresis

The performance of fluorescence detectors in capillary electrophoresis is maximized when the excitation light intensity is modulated in time with optimal frequencies. This is especially true when photomultiplier tubes are used to detect the fluorescent light. The photomultiplier tube amplified raw output signal can in principle be captured directly by a personal computer sound card (PCSC) and processed by a lock-in emulated by software. This possibility is demonstrated in the present work and the performance of this new setup is compared with a traditional data acquisition system. The results obtained with this “PCSC and lock-in emulated by software” were of the same quality or even better compared to that obtained by conventional time integrators (Boxcars) and data acquisition boards. With PCSC the limits of detection (LOD) found for both naphthalene-2,3-dicarboxaldehyde-derivatized tyrosine and alanine were 3.3 and 3.5 fmol (injection of 5 nL of samples at 0.66 and 0.70 μmol/L), respectively. This is at least three times better compared to conventional systems when light emitting diodes (LEDs) are used as the excitation source in fluorescence detectors. The PCSC linear response range was also larger compared to conventional data acquisition boards. This scheme showed to be a practical and convenient alternative of data acquisition and signal processing for detection systems used in capillary electrophoresis.     

Selectivity in cycloadditions-IX: Cycloadditions of nitrile oxides to indoles. Reactivity and regiochemistry

Cycloadditions of benzonitrile oxide and mesitonitrile oxide to N-methylindole and indole yield the acid sensitive cycloadducts 1 a-d with high regioselectivity. With N-carbethoxyindole the stable cycloadducts 1 e,f and minor amounts of the regioisomeric 2 e,f are isolated. The electron withdrawing substituent reduces both the regioselectivity and the reactivity of the cycloadditions.Frontier orbital considerations, based on MINDO/3 calculations, allow elucidation of the observed changes in reactivity and regiochemistry.     

A spin-statistics theorem for composites containing both electric and magnetic charges

The present paper states and proves an asymptotic spin-statistics theorem for composites consisting of electrically and magnetically charged particles. We work in the framework of a nonrelativistic theory, taking as the classical configuration space aU(1) bundle over the space of physical configurations, and as the quantum hilbert space the homogeneous square integrable functions on that bundle. The theorems are proved using a formalism we develop here for treating gauge spaces —U(1) bundles with connections; in particular, two products related to tensor products of vector bundles prove to be extremely useful in displaying the structure of the gauge spaces that naturally arise in this theory.Supported in part by the National Science Foundation under grant number PHY 77-07111Supported in part by the National Science Foundation under grant number PHY 78-24275     

Molecular orbital theory of the hydrogen bond. 24. Ground-state water–uracil complexes

Ab initio SCF calculations with the STO -3G basis set have been performed to investigate the structural, energetic, and electronic properties of mixed water–uracil dimers formed at the six hydrogen-bonding sites in the uracil molecular plane. Hydrogen-bond formation at three of the carbonyl oxygen sites leads to cyclic structures in which a water molecule bridges N₁? H and O₂, N₃? H and O₂, and N₃? H and O₄. Open structures form at O₄, N₁? H, and N₃? H. The two most stable structures, with energies of 9.9 and 9.7 kcal/mole, respectively, are the open structure at N₁? H and the cyclic one at N₁? H and O₂. These two are easily interconverted, and may be regarded as corresponding to just one “wobble” dimer. At 1 kcal/mole higher in energy is another “wobble” dimer consisting of an open structure at N₃? H and a cyclic structure at N₃? H and O₄. The third cyclic structure at N₃? H and O₂ collapses to the “wobble” dimer at N₃? H and O₄. The two “wobble” dimers are significantly more stable than the open dimer formed at O₄, which has a stabilization energy of 5.4 kcal/mole. Uracil is a stronger proton donor to water through N₁? H than N₃? H, owing to a more favorable molecular dipole moment alignment when association occurs through H₁. Hydration of uracil by additional water molecules has also been investigated. Dimer stabilization energies and hydrogen-bond energies are nearly additive in most 2:1 water:uracil structures. There are three stable “wobble” trimers, which have stabilization energies that vary from 7 to 9 kcal/mole per water molecule. Hydrogen-bond strengths are slightly enhanced in 3:1 water:uracil structures, but the cooperative effect in hydrogen bonding is still relatively small. The single stable water–uracil tetramer is a “wobble” tetramer, with two water molecules which are relatively free to move between adjacent hydrogen-bonding sites, and a stabilization energy of approximately 8 kcal/mole per water molecule. Within the rigid dimer approximation, successive hydration of uracil is limited to the addition of one, two, or three water molecules.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.     

The synthesis of thienocycloheptenoindoles

A synthesis of the methylthieno[3,2-c]cyclohepteno[b]indole 7 from 2-methylthieno[3,2-b]cycloheptanone 3 is described. Unsuccessful attempts to prepare the isomeric thienocycloheptenoindole system present in formula 2 , from the dihydrobenzothiophenone 8 , and from derivatives of 5-(2-thienyl)-4-oxopentanoic acid, 17 and 18 , and from N-benzylcycloheptindol-1-one 22 were unsuccessful. The preparation of 4,5-dihydro-2-phenyl-1-thienylmethyl-3H-pyridazin-3-one 20 and of the 5-aminopyrazole 21 are reported.     

The first enantiomerically pure [n]triangulanes and analogues: sigma-[n]helicenes with remarkable features

(M)-(-)- and (P)-(+)-Trispiro[2.0.0.2.1.1]nonanes [(M)- and (P)-3] as well as (M)-(-)- and (P)-(+)-tetraspiro[2.0.0.0.2.1.1.1]undecanes [(M)- and (P)-4]-enantiomerically pure unbranched [4]- and [5]triangulanes-have been prepared starting from racemic bicyclopropylidenecarboxylic [(1RS)-12] and exo-dispiro[2.0.2.1]heptane-1-carboxylic [(1RS,3SR)-13] acids. The optical resolutions of rac-12 and rac-13 furnished enantiomerically pure acids (S)-(+)-12, (R)-(-)-12, (1R,3S)-(-)-13, and (1S,3R)-(+)-13. The ethyl ester (R)-25 of the acid (R)-(-)-12 was cyclopropanated to give carboxylates (1R,3R)-26 and (1R,3S)-26. The ester (1R,3S)-26 and acids (1R,3S)-13 and (1S,3R)-13 were converted into enantiomerically pure methylene[3]triangulanes (S)-(-)- and (R)-(+)-28. An alternative approach consisted of an enzymatic deracemization of endo-[(1SR,3SR)-dispiro[2.0.2.1]heptyl]methanol (rac-20) or anti-[(1SR,3RS)-4-methylenespiropentyl]methanol (rac-18). This afforded (S)-(-)- and (R)-(+)-28 (starting from rac-20), as well as enantiomerically pure (M)-(-)- and (P)-(+)-1,4-dimethylenespiropentanes [(M)- and (P)-23] starting from rac-18. The methylenetriangulanes (S)-(-)- and (R)-(+)-28 were cyclopropanated furnishing (M)- and (P)-3. The rhodium-catalyzed cycloaddition of ethyl diazoacetate onto (S)-(-)- and (R)-(+)-28 yielded four diastereomeric ethyl trispiro[2.0.0.2.1.1]nonane-1-carboxylates in approximately equal proportions. The enantiomerically pure esters (1R,3S,4S)- and (1S,3R,4R)-30 were isolated by careful distillation and then transformed into [5]triangulanes (M)- and (P)-4 using the same sequence of reactions as applied for (M)- and (P)-3. The structures of the key intermediates (R)-12 and rac-31 were confirmed by X-ray analyses. Although [4]- and [5]triangulanes have no chromophore which would lead to any significant absorption above 200 nm, they have remarkably high specific rotations even at 589 nm with [alpha](20)D=-192.7 [(M)-3, c=1.18, CHCl(3))] or +373.0 [(P)-4, c=1.18, CHCl(3))]. This remarkable optical rotatation is in line with their helical arrangement of sigma bonds, as confirmed by a full valence space single excitation configuration interaction treatment (SCI) in conjunction with DFT computations at the B3LYP/TZVP//B3LYP/6-31+G(d,p) level of theory which reproduce the ORD very well. Thus, it is appropriate to call the helically shaped unbranched [n]triangulanes the "sigma-[n]helicenes", representing the sigma-bond analogues of the aromatic [n]helicenes.