Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Hidden minima of the gibbs free energy revealed in a phase separation in polymer/surfactant/water mixture

We observed a very unusual kinetic pathway in a separating C(12)E(6)/PEG/H(2)O ternary mixture. We let the mixture separate above the spinodal temperature (cloud point temperature) for some time and next cool it into a metastable region of a phase diagram, characterized by two minima of the Gibbs potential, one corresponding to the homogeneous mixture and one to the fully separated PEG-rich and C(12)E(6)-rich phases. Despite the fact that in the metastable region the thermodynamic equilibrium corresponds to the separated phases (global minimum of the Gibbs free energy), we observe perfect mixing of the initially separated phase. The homogeneous state, obtained in this way, does not separate, if left undisturbed. However, many cooling-heating cycles or full separation with visible meniscus above the cloud point temperature induce the phase separation in the metastable region. The metastable region can exist tens of degrees below the cloud point temperature. This effect is not observed in the binary mixture of C(12)E(6)/H(2)O.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

The mechanism of thermal decomposition of Co(NO3)2 · 2H2O

The mechanism of thermal decomposition of Co(NO₃)₂ · 2H₂O was found to involve stages in which Co(NO₃)₃ and Co₂O₃ · H₂O are formed both of which decompose to Co₃O₄. During the process, the total cobalt enters the +3 oxidation state, which is consistent with the results reported by Mehandjiev [2].

---

Zusammenfassung Es wurde gefunden, daß der Zersetzungsmechanismus von Co(NO₃)₂ · 2H₂O Schritte umfaßt, bei denen Co(NO₃)₃ sowie Co₂O₃ · H₂O gebildet werden, beides weiterzerfallend zu Co₃O₄. Während des Vorganges erreicht das Gesamtkobalt die Oxidationsstufe +3, was mit Ergebnissen von Mehandjiev übereinstimmt [2].

---

, , CO₃O₄. , .

     

Attractive halogen–halogen interactions: F3CCl⋯FH and F3CCl⋯FCH3 dimers

The F₃CCl?FH and F₃CCl?FCH₃ dimers, which feature the halogen–halogen contacts, are investigated at MP2/6–311++G(d,p) and MP2/aug–cc–pVDZ levels of approximation. The binding energies of these complexes are found to be comparable to those of the weak hydrogen bonds. In both complexes the Cl?F are found to be significantly shorter than the sum of the corresponding van der Waals radii. The C–Cl?F contacts are also found to exhibit certain deviation from linearity. However, the energy differences between linear and bent structures are very small and primarily accounted for by electrostatic interactions between remote parts of the dimer. This indicates a high conformational flexibility of the halogen–halogen contacts and may help to explain the diversity of structural features in crystals formed by halogen-containing molecules. In both dimers the halogen–halogen interaction leads to certain shortening of the C–Cl electron accepting bond. This is accompanied by a small increase of the C–Cl stretching frequency. Hence, the two investigated dimers can possibly be classified as the blue-shifting halogen–halogen contacts.     

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.     

Spectrophotometric determination of aluminum with bromopyrogallol red in the presence of surfactants

Spectrophotometric methods are described for the determination of microgram amounts of aluminum based on the formation of a ternary complex between the metal, bromopyrogallol red, and cetyltrimethylammonium bromide or nonylphenol tetradecaethylene glycol ether. The complexes have absorbance maxima at 627 and 612 nm, respectively, with molar absorptivities of 5.0 × 10⁴ and 2.2 × 10⁴ liter mol^?1 cm^?1. Numerous metals interfere. Aluminum can be easily separated by extraction of interfering ions with cupferron.     

Stability investigations of laser with saturable absorber

Stability of steady solutions of semiclassical laser-absorber model is investigated. It is found that the solutions exhibit instabilities for all values of cavity losses and, for some values of parameters, additional instability, connected with phase, appears. It is also shown by a numerical calculation that in an unstable region periodic and erratic motion can exist above criticallity.Supported in part by the Polish Ministery of Science, Technology and Higher Education, Project M.R.I.7     

Causal logic of Minkowski space

It is shown that double-orthogonal sets (diamonds) in Minkowski space form an orthomodular complete lattice. Connection with empirical logic of Randall and Foulis is discussed.