ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Analysis of anthocyanin pigments in Lonicera (Caerulea) extracts using chromatographic fractionation followed by microcolumn liquid chromatography-mass spectrometry

Anthocyanins from the fruit Lonicera caerulea L. var. kamtschatica (blueberry honeysuckle, Caprifoliaceae) were studied via (semi)preparative chromatographic fractionation followed by MS and μLC/MS analysis. The extraction procedure was optimized with respect to analytical purposes as well as its potential use for the preparation of nutraceuticals. The highest yield of anthocyanins was obtained using acidified methanol as the extraction medium. A comparable total anthocyanin content was obtained using a mixture of methanol and acetone. However, when Lonicera anthocyanins were in contact with acetone, a condensation reaction occurred to a large extent and related 5-methylpyranoanthocyanins were found. The effect of other extraction media, including ethanol as a "green" solvent, is also discussed. The potential of two fractionation procedures for extract purification differing in their chromatographic selectivity and scale was studied (i.e. using a Sephadex LH-20 gel column and a reversed phase). Fractions obtained by both procedures were used for a detailed analysis. MS and μLC/MS(2) methods were used for monitoring anthocyanin and 5-methylpyranoderivatives content as well as identifying less common and more complex dyes (dimer of cyanidin-3-hexoside, cyanidin-ethyl-catechin-hexosides, etc.). These more complex dyes are most likely formed during fruit treatment.     

Synthesis and structure of dinuclear dimethylene- or 1,4-phenylene-linked bis(decamethyltitanoceneoxide) (Ti) complexes

The singly tucked-in titanocene [Ti(η⁵-C₅Me₅)(η⁵:η¹-C₅Me₄CH₂)] (1) reacts smoothly with ethylene glycol or hydroquinone to give bis(titanoceneoxide) (Ti^III) complexes [CH₂OTi(η⁵-C₅Me₅)₂]₂ (2) and [(η⁵-C₅Me₅)₂TiOC₆H₄OTi(η⁵-C₅Me₅)₂] (3) containing dimethylene and 1,4-phenylene link, respectively. EPR spectra of 2 in 2-methyltetrahydrofuran glass and 3 in toluene glass revealed that the unpaired d¹ electrons are in interaction to form triplet state molecules. The Ti-Ti distance derived from the zero-field splittings D for the two conformations of 2 (7.42 Å and 7.66 Å) are in good agreement with the Ti-Ti distance of 7.2430(7) Å from the X-ray diffraction single-crystal analysis. For 3, however, the Ti-Ti distance derived from D (7.65 Å) is by 1.47 Å shorter than the crystallographic distance of 9.1230(8) Å that indicates an enhancement of the through-space dipole-dipole interaction due to the presence of a conjugated quinonide link.     

Transition‐State Stabilization by a Secondary Substrate–Ligand Interaction: A New Design Principle for Highly Efficient Transition‐Metal Catalysis

A library of monodentate phosphane ligands, each bearing a guanidine receptor unit for carboxylates, was designed. Screening of the library gave some excellent catalysts for regioselective hydroformylation of β,γ‐unsaturated carboxylic acids. A terminal alkene, but‐3‐enoic acid, was hydroformylated with a linear/branched (l/b) regioselectivity up to 41. An internal alkene, pent‐3‐enoic acid was hydroformylated with regioselectivity up to 18:1. Further substrate selectivity (e.g., acid vs. methyl ester) and reaction site selectivity (monofunctionalization of 2‐vinylhept‐2‐enoic acid) were also achieved. Exploration of the structure–activity relationship and a practical and theoretical mechanistic study gave us an insight into the nature of the supramolecular guanidinium–carboxylate interaction within the catalytic system. This allowed us to identify a selective transition‐state stabilization by a secondary substrate–ligand interaction as the basis for catalyst activity and selectivity.     

Regional cooperation in proficiency testing: strategy planning and practical experiences in Western Balkan countries

The article describes the project of regional cooperation in proficiency testing within CARDS 2006 (assistance programme to the Western Balkans), which was coordinated by European Committee for Standardization, European Commission and European Free Trade Association and conducted by the University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality. The later is the holder of the national standard for thermodynamic temperature as well as an accredited proficiency testing provider and also accredited as a calibration, testing and inspection laboratory. It is also responsible for graduate study programme Quality Engineering. Proficiency testing was considered as a core activity of the entire project, but additionally as a very appropriate platform for knowledge transfer of EU technical legislation in selected sectors, metrology, testing and quality assurance in general. The project had a high added value for participating laboratories in countries of Western Balkans, because it required an active role of all participating laboratories, assured participation of staff from national metrology institutions, all national accreditation bodies, and was supported by national quality infrastructures, such as standardization, governmental institutions etc. in the entire Western Balkans region. The activities stimulated progress in the area of conformity assessment, added knowledge to the implementation of technical directives and development of the technical part of national legislation and therefore facilitated the process toward the accession to the European Union. The main objective was therefore to organize proficiency testing in those sectors (construction, consumer protection and environment) that were vital in the pre-accession process of countries seeking full implementation of EU technical legislation.     

Evaluation of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry for the diagnosis of inherited metabolic disorders using an automated data processing strategy

Organic acidurias are a large group of inherited metabolic disorders (IMDs), commonly diagnosed by GC-MS analysis of organic acids in urine after acidic extraction and trimethylsilylation. In this study, a GC×GC-ToF-MS method has been optimized for the analysis of pathological metabolites in urine. An automated data processing strategy based on the use of mass spectra and GC retention times for the target search and quantification of pathological metabolites has been developed. Using this procedure, each unknown sample is automatically examined for the presence of markers of several diseases at the same time. The method has been applied for the analysis of 6 challenging proficiency testing samples from patients with IMDs (thymidine phosphorylase deficiency, mevalonic aciduria, hawkinsinuria, aromatic l-amino acid decarboxylase deficiency, propionic acidemia and medium-chain acyl-CoA dehydrogenase deficiency). Using the GC×GC-ToF-MS method, we were able to determine complete sets of markers for all the IMDs. The quality of the mass spectral matches for the pathological markers was higher than 800 (out of 1000).     

Detecting quantum states with a positive Wigner function beyond mixtures of Gaussian states

We propose a criterion giving a sufficient condition for quantum states of a harmonic oscillator not to be expressible as a convex mixture of Gaussian states. This nontrivial property is inherent to, e.g., a single-photon state and the criterion thus allows one to reveal a signature of the state even in quantum states with a positive Wigner function. The criterion relies on directly measurable photon number probabilities and enables detection of this manifestation of a single-photon state in quantum states produced by solid-state single-photon sources in a weak coupling regime.     

The stability and reactivity of activated acryloylcarbamates as reagents for the synthesis of N‐1 substituted thymine and uracil – an NMR and DFT study

The mechanism of the decomposition of acryloylcarbamates 7a–b yielding highly reactive isocyanates 3a–b was proposed based on NMR measurements and quantum chemical calculations. A good agreement between the experimental kinetic data and DFT calculations allowed us to demonstrate that the stability of 7a–d depends on the presence of methyl in the acryloyl moiety and the position of the nitro group in the nitrophenolic part of the molecule. Furthermore, the reactivity of 7a–d with weakly nucleophilic and sterically hindered 2,4,6‐tri‐tert‐butylaniline was explored by ¹H NMR demonstrating the usefulness of reagents 7a–d offering access to a variety of 1‐N‐substituted uracils and thymines with potentially interesting biological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical and experimental study of the nanoparticle-driven blue phase stabilisation

We have studied theoretically and experimentally the effects of various types of nanoparticles (NPs) on the temperature stability range [Formula: see text] T (BP) of liquid-crystalline (LC) blue phases. Using a mesoscopic Landau-de Gennes type approach we obtain that the defect core replacement (DCR) mechanism yields in the diluted regime [Formula: see text] T (BP)(x) [Formula: see text] 1/(1 - xb) , where x stands for the concentration of NPs and b is a constant. Our calculations suggest that the DCR mechanism is efficient if a local NP environment resembles the core structure of disclinations, which represent the characteristic property of BP structures. These predictions are in line with high-resolution ac calorimetry and optical polarising microscopy experiments using the CE8 LC and CdSe or aerosil NPs. In mixtures with CdSe NPs of 3.5nm diameter and hydrophobic coating the BPIII stability range has been extended up to 20K. On the contrary, the effect of aerosil silica nanoparticles of 7.0nm diameter and hydrophilic coating is very weak.     

Cyclodextrin modified gold nanoparticles-based open-tubular capillary electrochromatographic separations of polyaromatic hydrocarbons

In this study, spherical gold nanoparticles (GNPs) of 14.7 nm diameter, prepared by citrate reduction of a gold(III) salt and characterized by UV–Vis absorption spectrometry and transmission electron microscopy, were modified by a covalent attachment of 6^I-O-(3-mercaptopropyl)β-cyclodextrin (β-CD-SH) or per-6-deoxy-per-6-mercapto-β-cyclodextrin (β-CD-SH7). Subsequently, via three alternative approaches, β-CD-modified GNPs were immobilized onto the inner wall of the fused-silica (FS) capillaries and applied as special stationary phases for open-tubular capillary electrochromatography (OT-CEC). The first immobilization procedure was based on pre-derivatization of a FS capillary with (3-mercaptopropyl)trimethoxysilane (MPTMS) followed by subsequent reactions with GNPs and β-CD-SH or β-CD-SH7. The other two preparation protocols took advantage of sol–gel approach gaining a significant increase in the interaction surface for solutes. In both instances, the sol–gel created 3D structure was further covalently modified with GNPs. Serving that purpose, either β-CD-SH7 modified GNPs were used for the immobilization into the sol–gel matrix (“one-step sol–gel technique”) or native GNPs were immobilized first into the sol–gel matrix and subsequently modified with β-CD-SH7 (“two-step sol–gel technique”). The separation performance of CD-GNPs modified FS capillaries was tested by OT-CEC in reversed-phase mode applied to separation of a model mixture of five polyaromatic hydrocarbons. The highest separation efficiencies were obtained with the capillaries prepared by two-step sol–gel technique. However, with respect to the relatively low reproducibility of this method, the first of the above preparation procedures, i.e., a simple pre-derivatization of the FS capillary with MPTMS ensued with β-CD-SH7-GNPs immobilization seems to be more feasible approach providing decent separation efficiency.