Production of ethanol from cellulosic biomass by Clostridium thermocellum SS19 in submerged fermentation

Carotenogenesis of the lactose-negative yeast Rhodotorula rubra GED5 was studied by cocultivation with Kluyveromyces lactis MP11 in whey ultrafiltrate (WU) (35, 50, and 70 g of lactose/L). Maximum yields of cell mass (24.3 g/L) and carotenoids (10.2 mg/L of culture fluid or 0.421 μ g/g of dry cells) were obtained by growing the microbial association in WU (50 g of lactose/L) in a fermentor with an airflow rate of 0.8 L/(L·min), agitation of 220 rpm, and temperature of 30°C. The identified carotenoid pigments—β-carotene, torulene, and torularhodin—reached maximum concentrations (133, 26.9, and 222.3 μg/g of dry cells, respectively) on d 5 for torulene and d 6 for β-carotene and torularhodin.     

Ligand location and biochemical productivity of silica-based immunoaffinity adsorbents.

Ligand location within particles, detected by immunogold labelling, was shown to influence the biochemical productivity of a silica-based solid phase, Sorbsil C-500, using a model ligand-biomolecule system (immobilised human immunoglobulin G-anti-human immunoglobulin G monoclonal antibody). The distribution of the ligand was in turn affected by the initial ligand challenge used to prepare the immunoadsorbents. Maximal productivity was achieved with adsorbents prepared with an initial challenge of about 3 mg human immunoglobulin G per ml: the ligand in these cases was shown to be more uniformally distributed within the adsorbent particles than adsorbents, exhibiting low productivity, prepared with either low (1 mg/ml) or high (9 mg/ml) concentrations of human immunoglobulin G. The ligand in the latter was restricted to the periphery of the particles.     

Stereochemical applications of mass spectrometry: 1—The utility of electron impact and chemical ionization mass spectrometry in the differentiation of stereoisomeric benzoin oximes and phenylhydrazones

A study of the electron impact and chemical ionization (H₂, CH₄, and iso-C₄H₁₀) mass spectra of stereoisomeric benzoin oximes and phenylhydrazones indicates that while the former can be distinguished only by their chemical ionization mass spectra the latter are readily distinguishable by both their electron impact and chemical ionization mass spectra. The electron impact mass spectra of the isomeric oximes are practically identical; however, the chemical ionization spectra show that the E isomer forms more stable [MH]⁺ and [MH? H₂O]⁺ ions than the Z isomer for which both the [MH]⁺ and [MH? H₂O]⁺ ions are relatively unstable. In electron impact the Z-phenylhydrazone shows a lower [M]⁺˙ ion abundance and more facile loss of H₂O than does the E isomer. This more facile H₂O loss also is observed for the [MH]⁺ ion of the Z isomer under chemical ionization conditions.     

Regioselective nucleophilic ring-opening reaction of chiral epoxyallyl alcohols: a ready access to the pyran core of macrolactin 3

Herein we report the synthetic strategy towards the pyran core of macrolactin 3 via Sharpless epoxidation, titanium(IV) mediated regioselective ring-opening reaction of epoxyallyl alcohol/epoxy alcohol and oxa-Michael addition as the key steps.     

H-β-zeolite catalyzed synthesis of β-bromostyrenes from styrene bromohydrins

Synthesis of β-bromostyrenes from styrene bromohydrins using H-β-zeolite as catalyst under moderate conditions is reported. The catalyst could be regenerated and reused up to three consecutive cycles.     

An Unusual S-and N-Alkylation of Mercapto Substituted Heterocycles With O,O-Dialkyl Chlorophosphate/Thiophosphate

The reaction of different mercapto substituted heterocycles with o,o-dialkyl chlorphosphate or thiophosphates, gave the corresponding S- and N- alkylated derivatives instead of the expected phosphorylated products.     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012