Rate of capillary rise in porous media with nonuniform pores

An equation for the rate of capillary rise in porous media with nonuniform pores has been derived on the basis of a three-dimensional network model of pore structure, consisting of a repeating capillary element with step changes in its diameter. The measured rates of capillary rise of water in a number of sandstone samples have been accurately predicted by the model. The apparent capillary diameter for the rate of the capillary rise has been found to be several orders of magnitude smaller than the pore diameter corresponding to the peak of the mercury intrusion porosimetry curve. The permeability of the sandstone samples has been found to be approximately directly proportional to the apparent diameter of the rate of capillary rise. This approximate proportionality has been shown to follow from the capillary network model of the pore structure used in this work.     

Novel trifunctional building blocks for fluorescent polymers

[reaction: see text] Herein, we describe the synthesis of fluorescent 2-(arylsulfonyl)methacrylates and its polymers. These novel trifunctional monomers, possessing a fluorescent arylsulfonyl (ArSO(2)) group, an alkyl group (R), and a polymerizable olefin, serve as useful building blocks for functionalized fluorescent polymers.     

Calculation of the electronic structure of formaldehyde using overlapping spheres in the SCF Xα scattered-wave method

It has recently been established that physical realism of the results can be improved within the framework of the self-consistent statistical exchange multiple scattering wave method if the atomic spheres are allowed to overlap. Here we report that by semi-empirically adjusting the overlap of the atomic spheres, the ionization potentials and total energy are in better agreement with experiment, and the order of levels A₁ and B₂ in formaldehyde is reversed with respect to some other calculations. The electronic energy level structure calculated here is in agreement with the experimental results. A systematic study of the overlapping scheme for formaldehyde is presented and the results are compared with experiments and other theoretical calculations.     

2-(N-Allylaminomethyl)cinnamaldehydes as substrates for syntheses of aza-polycycles via intramolecular cycloaddition reactions

Syntheses of a variety of aza-polycycles employing 2-(N-allylaminomethyl)cinnamaldehydes derived from Morita–Baylis–Hillman adducts of acrylates via intramolecular 1,3-dipolar cycloaddition, or Aza-Diels–Alder or domino Knoevenagel/hetero Diels–Alder cycloaddition reactions are described. Whereas the Aza-Diels–Alder afforded a mixture of cis- and trans-isomers of substituted 1,2,3,4,4a,5,10,10a-octahydrobenzo[b][1,6]naphthyridines, the 1,3-dipolar cycloaddition and domino Knoevenagel/hetero Diels–Alder were diastereoselective to produce exclusively cis-derivatives of 1,2,3,4,4a,6,7,8,9,9a-decahydro-1H-pyrido[3,4-b]pyrrolizine-8a-carboxylates and 3,4,4a,5,7,8,9,10b-octahydro-1H-chromeno[3,4-c]pyridin-10(2H)-ones, respectively.     

β,γ-CHF- and β,γ-CHCl-dGTP diastereomers: synthesis, discrete 31P NMR signatures, and absolute configurations of new stereochemical probes for DNA polymerases

Deoxynucleoside 5'-triphosphate analogues in which the β,γ-bridging oxygen has been replaced with a CXY group are useful chemical probes to investigate DNA polymerase catalytic and base-selection mechanisms. A limitation of such probes has been that conventional synthetic methods generate a mixture of diastereomers when the bridging carbon substitution is nonequivalent (X ≠ Y). We report here a general solution to this long-standing problem with four examples of β,γ-CXY dNTP diastereomers: (S)- and (R)-β,γ-CHCl-dGTP (12a-1/12a-2) and (S)- and (R)-β,γ-CHF-dGTP (12b-1/12b-2). Central to their preparation was conversion of the prochiral parent bisphosphonic acids to the P,C-dimorpholinamide derivatives 7 of their (R)-mandelic acid monoesters, which provided access to the individual diastereomers 7a-1, 7a-2, 7b-1, and 7b-2 by preparative HPLC. Selective acidic hydrolysis of the P-N bond then afforded "portal" diastereomers, which were readily coupled to morpholine-activated dGMP. Removal of the chiral auxiliary by H(2) (Pd/C) gave the four individual diastereomeric nucleotides 12, which were characterized by (31)P, (1)H, and (19)F NMR spectroscopy and by mass spectrometry. After treatment with Chelex-100 to remove traces of paramagnetic ions, at pH ~10 the diastereomer pairs 12a,b exhibit discrete P(α) and P(β)(31)P resonances. The more upfield P(α) and more downfield P(β) resonances (and also the more upfield (19)F NMR resonance in 12b) are assigned to the R configuration at the P(β)-CHX-P(γ) carbons on the basis of the absolute configurations of the individual diastereomers as determined from the X-ray crystallographic structures of their ternary complexes with DNA and polymerase β.     

Studies on the reduction of the nitro group in 3-aryl-2-methylene-4-nitro-alkanoates afforded by the Baylis-Hillman adducts: synthesis of 4-aryl-3-methylene-2-pyrrolidinones and 3-(1-alkoxycarbonyl-vinyl)-1H-indole-2-carboxylates

The formation of substituted 2-pyrrolidinones and indoles by the reduction of the secondary nitro group in appropriate 3-aryl-2-methylene-4-nitroalkanoates afforded by Baylis-Hillman chemistry via different reducing agents is described. The 3-aryl-2-methylene-4-nitroalkanoate obtained from S_N2 nucleophilic reaction between the acetate of Baylis-Hillman adducts and ethyl nitroacetate upon reduction with indium-HCl furnishes a mixture of cis and trans substituted phenyl-3-methylene-2-pyrrolidinones. In contrast, similar reductions of analogous substrates derived from nitroethane stereoselectively furnished only the trans substituted phenyl-3-methylene-2-pyrrolidinones. On the other hand the SnCl₂·2H₂O-promoted reductions of substrates derived from nitro ethylacetate give oxime derivatives while the ones obtained from nitroethane yield a mixture of cis and trans 4-aryl-3-methylene-2-pyrrolidinones. Alternatively, the SnCl₂·2H₂O-promoted reduction of substituted 2-nitrophenyl-2-methylene-alkanoate furnished from ethyl nitroacetate yield 3-(1-alkoxycarbonyl-vinyl)-1H-indole-2-carboxylate while indium-promoted reaction of this substrate leads to a complex mixture. Analogous reactions with SnCl₂·2H₂O of substituted 2-nitrophenyl-2-methylene-alkanoate obtained from nitroethane yield 4-alkyl-3-methylene-2-quinolones in moderate yields.     

Mononuclear and binuclear manganese(II) complexes with tridentate bis-benzimidazolyl ligands

Summary Manganese(II) complexes of bis(2-benzimidazolylmethyl) ether (DGB), bis(2-benzimidazolylmethyl) sulphide (TGB) and the n-butyl derivative of DGB (BDGB) were prepared and characterised. The solution e.p.r. spectrum of [Mn(TGB)Cl₂] in DMF at 143 K is commensurate with an axially distorted monomeric manganese(II) complex, room temperature magnetic moment (6.04 B.M.) per manganese(II) atom being in the range found for other d⁵ monomeric manganese(II) complexes. The solution e.p.r. spectrum of [Mn(BDGB)Cl₂]-2H₂O in DMF at 143 K indicates the presence of two equivalent manganese(II) ions coupled by an exchange interaction, fostered by bridging chlorides. Evidence for this is provided by a nearly isotropic 11 line hyperfine structure of ⁵⁵Mn, with a coupling constant 45 ± 5G. Contact-shifted ¹H n.m.r. data also supports an exchange coupled dimeric manganese complex. The room temperature magnetic moment, 5.64 B.M., per manganese(II) indicates quenching of the magnetic moment below that of monomeric manganese(II) ion. The [Mn(DGB)Cl₂]·H₂O complex exhibits a magnetic moment of 6.02 B.M. per manganese, indicating a monomeric manganese complex. E.p.r. data of the complex diluted in an analogous Zn-DGB complex (1∶20) correlates well for D = 0.22cm⁻¹ and λ ∼- 0.267. The [Mn(DGB)-(C1O₄)₂] and [Mn(BDGB)(ClO₄)₂] complexes, diluted in analogous Zn-DGB and Zn-BDGB complexes (1∶20), show a strong single e.p.r. line at g _eff ∼- 2. The complexes have low magnetic moments; 4.44 B.M./Mn and 4.39 B.M./Mn, at room temperature.     

On the heat setting and thermomechanical behavior of polyethylene terephthalate and nylon 66 monofilaments

The force-temperature history of polyethylene terephthalate (PET) and nylon 66 monofilaments was explored at annealing temperatures of 100,125, 150,175, and 200°C. Annealing was carried out at constant length with 0, 5, 10, and 15% pre-strain. Unexpected difference in behavior was observed during the cooling stage subsequent to the annealing stage. The PET monofilament behavior is attributed to its very high degree of crystallinity.