Picosecond control of coherent magnetisation dynamics in permalloy thin films by picosecond magnetic field pulse shaping

We have measured the response of a 20×10 μm, 8 nm thin NiFe (80:20) permalloy film due to excitation by short in-plane magnetic field pulses. We will show that using a two-pulse-technique a complete control of the precessional motion of the magnetisation can be achieved on picosecond timescales. Furthermore, we will present numerical calculations which show that a complete suppression of magnetisation ringing after switching can only be realised by a cascade of short field pulses.     

Crystal structure and magnetic ordering of RNi Si compounds

The element distributions and the magnetic ordering behaviour of compounds RNi₁₀Si₂ (R = Tb, Dy, Ho, Er, Tm) have been studied by neutron powder diffraction down to temperatures of 1.6 K. The compounds crystallize in an ordered variant of the ThMn₁₂ structure type in the tetragonal space group P4/nmm. An ordered 1:1 distribution of Ni and Si on sites 4d and 4e, respectively, corresponds to a modulation vector [0, 0, 1] with respect to the space group I4/mmm of the ThMn₁₂ structure. TbNi₁₀Si₂ orders antiferromagnetically below T _N = 4.5 K with a magnetic propagation vector of [0, 0, 1/2]. The magnetic Tb moments, 8.97(2) /Tb atom at 1.6 K, are aligned along the c-axis. The Ni sites in TbNi₁₀Si₂ do not carry any ordered magnetic moments. The compounds with R = Dy, Ho, Er, and Tm are paramagnetic down to 1.6 K and 3.0 K, respectively. Received 10 July 2002 / Received in final form 12 September 2002 Published online 29 October 2002     

Higher-order <Emphasis Type="Bold">?</Emphasis> corrections in the semiclassical quantization of chaotic billiards

In the periodic orbit quantization of physical systems, usually only the leading-order ? contribution to the density of states is considered. Therefore, by construction, the eigenvalues following from semiclassical trace formulae generally agree with the exact quantum ones only to lowest order of ?. In different theoretical work the trace formulae have been extended to higher orders of ?. The problem remains, however, how to actually calculate eigenvalues from the extended trace formulae since, even with ? corrections included, the periodic orbit sums still do not converge in the physical domain. For lowest-order semiclassical trace formulae the convergence problem can be elegantly, and universally, circumvented by application of the technique of harmonic inversion. In this paper we show how, for general scaling chaotic systems, also higher-order ? corrections to the Gutzwiller formula can be included in the harmonic inversion scheme, and demonstrate that corrected semiclassical eigenvalues can be calculated despite the convergence problem. The method is applied to the open three-disk scattering system, as a prototype of a chaotic system. Received 10 September 2001 and Received in final form 3 January 2002     

The standard model on non-commutative space-time

We consider the standard model on a non-commutative space and expand the action in the non-commutativity parameter . No new particles are introduced; the structure group is . We derive the leading order action. At zeroth order the action coincides with the ordinary standard model. At leading order in we find new vertices which are absent in the standard model on commutative space-time. The most striking features are couplings between quarks, gluons and electroweak bosons and many new vertices in the charged and neutral currents. We find that parity is violated in non-commutative QCD. The Higgs mechanism can be applied. QED is not deformed in the minimal version of the NCSM to the order considered. Received: 29 November 2001 / Published online: 25 January 2002     

Diffractive heavy vector meson production from the BFKL equation

Diffractive heavy vector meson photoproduction accompanied by proton dissociation is studied for arbitrary momentum transfer. The process is described by the non-forward BFKL equation, for which a complete analytical solution is found, giving the scattering amplitude. The impact of non-leading corrections to the BFKL equation is also analysed. Results are compared to the HERA data on production. Received: 2 July 2002 / Revised version: 29 August 2002 / Published online: 18 October 2002     

The simulation of dendrite growth and partial discharges in epoxy resin

A self-consistent model of the development of dendrites and partial discharges in a dielectric solid under a variable voltage is suggested. Dendrites originate at sites with the enhanced local field strength and also where the dielectric is broken down under the action of partial discharges. The numerical simulation is used to quantitatively describe the space-time dynamics of the dendrites and partial discharges in epoxy resin for the tip-plane electrode configuration. The simulated data are compared with electrical measurements of partial discharges and with optical images of dendrite growth under the same conditions.     

Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Electromagnetic propagation in a curved two-dimensional waveguide

Fields due to an electromagnetic wave propagating in a long irregular two-dimensional waveguide are calculated efficiently, using the method of left-right splitting to solve the coupled integral equations. Results are compared with those obtained from independent ray-theoretic calculations and give very close agreement. The approach has previously been applied to rough surfaces at low angles of incidence; here it is found to converge rapidly for surface slopes of 30°, and after a few iterations for incident angles up to 60° from grazing.     

Database reverse engineering: From requirements to CARE tools

This paper analyzes the requirements that CASE tools should meet for effective database reverse engineering (DBRE), and proposes a general architecture for data-centered applications reverse engineering CASE environments. First, the paper describes a generic DBMS-independent DBRE methodology, then it analyzes the main characteristics of DBRE activities in order to collect a set of desirable requirements. Finally, it describes DB-MAIN, an operational CASE tool developed according to these requirements. The main features of this tool that are described in this paper are its unique generic specification model, its repository, its transformation toolkit, its user interface, the text processors, the assistants, the methodological control and its functional extensibility. Finally, the paper describes five real-world projects in which the methodology and the CASE tool were applied. This is a heavily revised and extended version of “Requirements for Information System Reverse Engineering Support” by J.-L. Hainaut, V. Englebert, J. Henrard, J.-M. Hick, D. Roland, which first appeared in the Proceedings of the Second Working Conference on Reverse Engineering, IEEE Computer Society Press, pp. 136–145, July 1995. This paper presents some results of the DB-MAIN project. This project is partially supported by the Région Wallonne, the European Union, and by a consortium comprising ACEC-OSI (Be), ARIANE-II (Be), Banque UCL (Lux), BBL (Be), Centre de recherche public H. Tudor (Lux), CGER (Be), Cockerill-Sambre (Be), CONCIS (Fr), D'Ieteren (Be), DIGITAL, EDF (Fr), EPFL (CH), Groupe S (Be), IBM, OBLOG Software (Port), ORIGIN (Be), Ville de Namur (Be), Winterthur (Be), 3 Suisses (Be). The DB-Process subproject is supported by the Communauté Fran?aise de Belgique.     

Dirac-Hestenes spinor fields on Riemann-Cartan manifolds

In this paper we study Dirac-Hestenes spinor fields (DHSF) on a four-dimensional Riemann-Cartan spacetime (RCST). We prove that these fields must be defined as certain equivalence classes of even sections of the Clifford bundle (over the RCST), thereby being certain particular sections of a new bundle named the spin-Clifford bundle (SCB). The conditions for the existence of the SCB are studied and are shown to be equivalent to Geroch's theorem concerning the existence of spinor structures in a Lorentzian spacetime. We introduce also the covariant and algebraic Dirac spinor fields and compare these with DHSF, showing that all three kinds of spinor fields contain the same mathematical and physical information. We clarify also the notion of (Crumeyrolle's) amorphous spinors (Dirac-Kähler spinor fields are of this type), showing that they cannot be used to describe fermionic fields. We develop a rigorous theory for the covariant derivatives of Clifford fields (sections of the Clifford bundle, CB) and of Dirac-Hestenes spinor fields. We show how to generalize the original Dirac-Hestenes equation in Minkowski spacetime for the case of RCST. Our results are obtained from a variational principle formulated through the multiform derivative approach to Lagrangian field theory in the Clifford bundle.