Photoinitiated cationic polymerisation of multifunctional systems

Different types of tridimensional polymer networks have been synthetised by photoinitiated cationic polymerisation of vinyl ether and epoxy-functionalised oligomers and polymers. The polymerisation kinetics was followed by real-time infrared (RTIR) spectroscopy, a technique that records directly conversion versus time profiles in a timescale as short as 1 s. The addition of a diacrylate monomer was shown to accelerate the ring-opening polymerisation of epoxidized polyisoprene, with formation of interpenetrating polymer networks having well contrasted properties. A dual polymer network has been generated by photocrosslinking of a polyisoprene functionalised with both epoxy and acrylate groups.     

Data assimilation and pollution forecasting in Burgers' equation with model error function

This article presents a correction method for a better resolution of the problem of estimating and predicting pollution, governed by Burgers' equations. The originality of the method consists in the introduction of an error function into the system's equations of state to model uncertainty in the model. The initial conditions and diffusion coefficients, present in the equations for pollution and concentration, and also those in the model error equations, are estimated by solving a data assimilation problem. The efficiency of the correction method is compared with that produced by the traditional method without introduction of an error function.Three test cases are presented in this study in order to compare the performances of the proposed methods. In the first two tests, the reference is the analytical solution and the last test is formulated as part of the “twin experiment”.The numerical results obtained confirm the important role of the model error equation for improving the prediction capability of the system, in terms of both accuracy and speed of convergence.     

Target Design of Novel Histone Deacetylase 6 Selective Inhibitors with 2-Mercaptoquinazolinone as the Cap Moiety

Epigenetic alterations found in all human cancers are promising targets for anticancer therapy. In this sense, histone deacetylase inhibitors (HDACIs) are interesting anticancer agents that play an important role in the epigenetic regulation of cancer cells. Here, we report 15 novel hydroxamic acid-based histone deacetylase inhibitors with quinazolinone core structures. Five compounds exhibited antiproliferative activity with IC₅₀ values of 3.4–37.8 µM. Compound 8 with a 2-mercaptoquinazolinone cap moiety displayed the highest antiproliferative efficacy against MCF-7 cells. For the HDAC6 target selectivity study, compound 8 displayed an IC₅₀ value of 2.3 µM, which is 29.3 times higher than those of HDAC3, HDAC4, HDAC8, and HDAC11. Western blot assay proved that compound 8 strongly inhibited tubulin acetylation, a substrate of HDAC6. Compound 8 also displayed stronger inhibition activity against HDAC11 than the control drug Belinostat. The inhibitory mechanism of action of compound 8 on HDAC enzymes was then explored using molecular docking study. The data revealed a high binding affinity (−7.92 kcal/mol) of compound 8 toward HDAC6. In addition, dock pose analysis also proved that compound 8 might serve as a potent inhibitor of HDAC11.     

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.     

Optical modes in nanoscale one-dimensional spin chains

The spin chain systems with one-dimensional magnetic ordering are promising candidates for quantum optical devices. This paper shows how the optical excitation can induce various phonon modes in an ideal Cu-O chain at various lengths. The calculation was carried out at different level theories including configuration interaction singles for excited states, density functional theory and second-order Möller-Plesset perturbation. In general, the number of modes increases with chain length due to growing asymmetry of atomic positions when chain exceeds 5 nm. There were, however, only two basic modes: one is associated with the symmetric oscillation of oxygen and another with the asymmetric motion of the same along the chain. At the length below 4.3 nm, the Raman activity of the symmetric mode (440 cm⁻¹) dominates. From analysis of density of states, this mode may be associated with the excitation across the lowest LUMO bands with changing in spin state.     

Determination of neutron temperature in irradiation channels of reactor

The neutron temperature is a characteristic parameter in irradiation channels of reactor. For nuclides which have resonances in the thermal neutron energy range, their Westcott g-factors are different from unity. The values of g-factors and cross-sections of (n, γ) reaction of these nuclides are temperature dependence. The standard energy for tabulation of thermal neutron cross-section (σ₀) is that of room temperature (293.59 K or 20.43 °C), corresponding to a neutron energy 0.0253 eV or to a neutron velocity of 2200 m/s. However, in the irradiation channels of reactor, the temperature is not exact at 20.43 °C. Thus, the temperature at the irradiation position must be known to convert σ₀ to σ(T). A method for determination of the neutron temperature in irradiation channels of Dalat reactor is presented by fitting the thermal neutron spectrum obtained from the calculation using MCNP code.     

Drop deposition of thin nanostructured coatings of lead telluride

The current-voltage relationships of deposited structures are measured for cluster structures consisting of nanoparticles of lead telluride. Variation in the value of the tunnel current is shown. Optimum conditions for the possible emergence of quantum-hopping conductivity due to carrier tunneling (the characteristic sizes of the nanoclusters and the distances between them) are determined.     

Pb(3)F(5)NO(3), a cationic layered material for anion-exchange

Our research involves the development of new cationic materials for anion-based applications. We report the solvothermal synthesis and characterization of Pb(3)F(5)NO(3), a new layered lead fluoride material that, unlike the majority of layered and open-framework materials, is cationic in charge. The structure consists of polyhedral lead centers connected by doubly and triply bridging fluoride groups. We quantitatively exchanged the interlamellar nitrate groups of Pb(3)F(5)NO(3) for dichromate, under ambient aqueous conditions. Nuclear magnetic resonance and UV-vis spectroscopy show the reaction proceeds to 61.0% completion in several days. The material is also stable to 450 degrees C, which is vastly superior to organic resins that are still the standard for anion-exchange. The presence of extraframework anions also opens up other potentially unique anion-based properties, such as new catalytic reactions, anion intercalation, or growth of anionic clusters within the void spaces of the cationic material.