Production of Acetone–Butanol–Ethanol (ABE) in Direct Fermentation of Cassava by Clostridium saccharoperbutylacetonicum N1-4

In this work, acetone–butanol–ethanol (ABE) fermentation characteristics of cassava starch and cassava chips when using Clostridium saccharoperbutylacetonicum N1-4 was presented. The obtained results in batch mode using a 1-L fermenter showed that C. saccharoperbutylacetonicum N1-4 was a hyperamylolytic strain and capable of producing solvents efficiently from cassava starch and cassava chips, which was comparable to when glucose was used. Batch fermentation of cassava starch and cassava chips resulted in 21.0 and 19.4 g/L of total solvent as compared with 24.2 g/L of total solvent when using glucose. Solvent productivity in fermentation of cassava starch was from 42% to 63% higher than that obtained in fermentation using corn and sago starches in the same condition. In fermentation of cassava starch and cassava chips, maximum butanol concentration was 16.9 and 15.5 g/L, respectively. Solvent yield and butanol yield (based on potential glucose) was 0.33 and 0.41, respectively, for fermentation of cassava starch and 0.30 and 0.38, respectively for fermentation using cassava chips.     

Synthesis and Crystal Structure of Bis[<Emphasis Type="Italic">N</Emphasis>-{(<Emphasis Type="Italic">S</Emphasis>)-1-Phenylethyl}-<Emphasis Type="Italic">N</Emphasis>-{1-(2-Pyridinyl)Methyl}Amine] Zinc(II) Perchlorate

Abstract  

The reaction of N-[(S)-1-phenylethyl]-N-[1-(2-pyridinyl)methyl]amine (PEPMA) with Zn(ClO₄)₂ affords (PEPMA)₂Zn(ClO₄)₂ at room temperature. The complex is characterized by elemental analysis, ¹H-MNR and X-ray crystallography. The crystal system is orthorhombic with space group of P2₁2₁2₁ and unit cell parameters: a = 8.6911(4), b = 9.7755(7), c = 37.275(2) ?, V = 3166.9(3) ?³, Z = 4, D _x  = 1.445 Mg/m³. The crystal structure reveals that zinc metal is ligated by two PEPMA ligands in a distorted tetrahedral fashion. Interestingly, both nitrogen atoms of amine at PEPMA to the central zinc metal exhibit (R)-configuration.     

Designing an intelligent teaching simulator for learning to teach by practicing

Learning to teach is difficult for prospective teachers because of the complex nature of the work of teaching. Practicing (Lampert in J Teach Educ 61(1–2):21–34, 2010), interacting with the practice of teaching from a first-person perspective, may give them a unique experience in learning to teach. Computer-based simulators in which the apprentice teacher can interact with virtual students may be used to create that kind of experience. In this paper, we show how to apply techniques in artificial intelligence to design an intelligent learning environment. We show how to model the apprentice’s decision making and resources that can help him or her improve the practice of teaching.     

Equivalent contributing depth investigated by a lateral wave with axial transmission in viscoelastic cortical bone

Cortical bone is a viscoelastic heterogeneous medium which may be assessed with axial transmission. This work aims at evaluating the average depth investigated by the lateral wave for radial variations of material properties in relatively thick cortical bone. The equivalent contributing depth (ECD) is derived from the finite element simulation results for spatial variations of a viscoelastic coefficient (η(11)) and of porosity. A value of ECD equal to around 1.6 mm is obtained for a spatial variation of η(11). The method fails to predict accurate values of the ECD for a spatial variation of porosity, because all parameters vary simultaneously.     

Breakup modes of a laminar hollow water jet

Graphical Abstract  

     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Linear Balanceable and Subcubic Balanceable Graphs*

In Math Program 55(1992), 129–168, Conforti and Rao conjectured that every balanced bipartite graph contains an edge that is not the unique chord of a cycle. We prove this conjecture for balanced bipartite graphs that do not contain a cycle of length 4 (also known as linear balanced bipartite graphs), and for balanced bipartite graphs whose maximum degree is at most 3. We in fact obtain results for more general classes, namely linear balanceable and subcubic balanceable graphs. Additionally, we prove that cubic balanced graphs contain a pair of twins, a result that was conjectured by Morris, Spiga, and Webb in ( Discrete Math 310(2010), 3228–3235).     

Existence and compactness for the {\overline{\partial}} -Neumann operator on q-convex domains

The aim of this paper is to give a sufficient condition for existence and compactness of the \({\overline{\partial}}\) -Neumann operator N _q on \({L^2_{(0,q)}(\Omega)}\) in the case Ω is an arbitrary q-convex domain in \({\mathbb{C}^n}\) .     

Comparison of three methods for fractionation and enrichment of low molecular weight proteins for SELDI-TOF-MS differential analysis

In most diseases, the clinical need for serum/plasma markers has never been so crucial, not only for diagnosis, but also for the selection of the most efficient therapies, as well as exclusion of ineffective or toxic treatment. Due to the high sample complexity, prefractionation is essential for exploring the deep proteome and finding specific markers.In this study, three different sample preparation methods (i.e., highly abundant protein precipitation, restricted access materials (RAM) combined with IMAC chromatography and peptide ligand affinity beads) were investigated in order to select the best fractionation step for further differential proteomic experiments focusing on the LMW proteome (MW inferior to 40,000 Da). Indeed, the aim was not to cover the entire plasma/serum proteome, but to enrich potentially interesting tissue leakage proteins. These three methods were evaluated on their reproducibility, on the SELDI-TOF-MS peptide/protein peaks generated after fractionation and on the information supplied.The studied methods appeared to give complementary information and presented good reproducibility (below 20%). Peptide ligand affinity beads were found to provide efficient depletion of HMW proteins and peak enrichment in protein/peptide profiles.